Vevor Chainsaw Sharpener and Test Cuts. Did we get screwed?

Рет қаралды 2,389

Күн бұрын

Пікірлер: 43

@JoesFirewoodVideos 10 ай бұрын

I’m a new Skool when it comes to chainsaw chain sharpening and use my Oregon grinder. I think I paid $428 for it in 2013. I usually can get the chains relatively sharp, a helluva lot sharper than using a single file. I rather swap chains especially out in the bush.

@hillbillyfranks 10 ай бұрын

Good job I like that It seems the work pretty good So keep cutting my friend and Will see you on the next one Stay safe Stay healthy stay happy have a good day

@Alan_Hans__ 10 ай бұрын

Cutting and splitting wood is therapeutic. When things are going sweet the therapy is so much better.

@BigelowWoodcraft 10 ай бұрын

I've been using an Oregon grinder for a couple decades. No problem sharpening by hand afterwards for me either. Light grind if i need to go around twice i do. Great video

@smorefirewood 2 ай бұрын

@@BigelowWoodcraft it’s just a learning curve.

@toddpacheco4748 10 ай бұрын

Dana excellent work and video you’ve taught Millie well about equipment and trucks 🛻 always a pleasure listening to your laughter Dana 😮😊❤

@fricknjeep 10 ай бұрын

hi there on my grinder i have to pull that lever over to lock the blade in place , best to all john

@toddsoutsideagain 10 ай бұрын

Always entertaining watching you work Dana! Gettin it done and havin fun👍🏻👍🏻

@mountaintopoutdoors 10 ай бұрын

Great Work Dana. She cuts now. Just have to fine tune it and you're golden.

@InMyBusyLittleShop 10 ай бұрын

Looks handy! Those were some knobby logs.

@johnwinslow4503 10 ай бұрын

Have been using the Timberline Sharpening system for six years now, fast, easy and accurate. Having saws with 5/32 to 7/32 size teeth, this unit does them all with chain left on the bar.

@AllenFamilyFirewood 10 ай бұрын

Good to see you had better luck , there must be a trick to using them grinders and Stihl be able to hand file after .

@inthebackyardwithdel438 10 ай бұрын

Morning Dana and Millie !!

@Gavin_outdoors331 10 ай бұрын

Looks good

@brandonhoad9033 10 ай бұрын

5/16" to the right 😅😅. How do you like that 8 10 chain? I've had a couple guys grind for me. Couldn't file for beans on one but the other's worked just fine . I don't know about the hard thing but the w the difficult one, the shape changed more square, i would call it. Just couldn't file afterwards

@larrykluckoutdoors8227 10 ай бұрын

The chips on the ground looked nice, no dust in the air, so I say it was ok

@Dieselolds 10 ай бұрын

Might be good if you have many chains to prepare before work, especially if you cut a lot of old timber that have been on the ground.

@jameswade1219 10 ай бұрын

you could see how far off the cutter head angles were on the second chain, seems to do a good job

@ohiowoodburner 10 ай бұрын

Millie has good taste in trucks. The 300 ci is the best engine ever made.

@leonardryan8723 10 ай бұрын

That why I run the old 2195 jonsered easy for gas & oil and NO LEAK lol 😊

@Mainelywork 10 ай бұрын

🤘As a husky owner I think I might have been offended. But I’m not sure

@smorefirewood 9 ай бұрын

I am sorry if your saw choice brings you shame. lol. Kidding I’m just kidding. Or am I ?

@leonardryan8723 10 ай бұрын

Dana need a lock washer electric chainsaw sharper, FORD built tough ! 😊

@nseric1233 9 ай бұрын

You need to slow down and be more careful to get good results with any grinder. None of them work well if you dont line things up perfect. You must lock the chain down before grinding the cutter, if the cutter can wiggle like yours does while you're grinding it won be consistent. The first chain needed the depth gauges cut way down, when the teeth are almost gone the depth gauges should be almost gone too.

@smorefirewood 9 ай бұрын

You are correct. I needed to remove a couple shim washers so the cain could be gripped. Plus the left/right pivot needs to me massaged a little as when I try to lock the chain it easily pivots.

@davidedwards3734 10 ай бұрын

Hope the chain sharpener works out for you!! Stay Hydrated and Have a Safe Day

@BW35bucket 10 ай бұрын

Yes Dana you are the man of steel. You got a huge S on your chest. Great video. Dana try the Hexa chain out by STIHL. Your Oregon file you used in video, will not work so well. See if you can put a video out on its pros and cons. O boy have a great day.

@leonardryan8723 10 ай бұрын

Dana your having a hard time cutting firewood 🪵 with that STIHL , GIVE your buddy PHIL a call for his old jonsered, probably won’t hurt your MAN HANDS 🙌. Phil got soft hand 🤚 for a jonsered now . 😊

@leonardryan8723 10 ай бұрын

Here a little trick warm your chain up 🔝 in a cut , them take a hand 🤚 file to it . Keep your chain warm and keep filing the teeth 🦷. Try that Dana and old logger trick 😊

@leonardryan8723 10 ай бұрын

Go in the house have Phil mom blueberry 🫐 pudding with ice cream 🍨 and good cup off hot tea ☕️ Dana . Hey 👋 it’s Friday relax up 🔝 for Monday morning lol 😊

@andrewadam9544 3 ай бұрын

your not using the lever on the front to lock the chain in place , in the video you can clearly see the chain cant forward and backward so you will get inconsistent grinding between all the teeth. All those levers and adjusters are there for a reason ! your also taking off a lot of tooth in one pass so your probably over heating and burning the teeth , softening them ?

@smorefirewood 3 ай бұрын

Thanks for the info

@brackenprofaizer2601 10 ай бұрын

Comment

@OpenAirAdventureFirewood 10 ай бұрын

Hens tooths can't cut for beans

@allenevans3044 10 ай бұрын

Dana, I’ve been a subscriber of your channel for over a year. If I have to listen to you BURPING again I’m going to unsubscribe!! Very disrespectful to me and everyone else! Fair warning and remember your in public view and not just outdoors in your backyard. Thanks and good luck.

@smorefirewood 9 ай бұрын

I am sorry you are offended.