VEVOR Leather Cutting Machine and Manual Die Cutter 360x220mm Leather Embossing Machine Product Link: bit.ly/3xpAtXA US Store Link: bit.ly/3RQH59B
@moisesgarcia267 Жыл бұрын
You need to wet a little the leather, before to Stam it and it is gona be more impressive..
@PourMeAnother Жыл бұрын
What thickness of dies can be used? Texas Custom Dies reccommended 1.25" Does this press accept that size?
@RandolfoGarcia-te1sp6 ай бұрын
Yes, I am going to buy one next week...I like that...
@supermario79562 жыл бұрын
Now we need cutting dies with many of your small medium patterns 🤩🤩🤩
@charliezaremba38182 жыл бұрын
I took a gamble and ordered one of these about a year ago. It is one heavy mfer. I’m new to the leather working world but I’ve been wanting to get more and more immersed. I wasn’t sure if this product stacked up to others, it seemed to be doing the job for me after a little practice with it. Glad to see my favorite leather worker giving it good reviews.
@LoveByCookieSTL2 жыл бұрын
This video has me itching to get one. It would cut out hours of scissor time and keep things uniform and perfect. Is yours doing what you want? Are you happy with your purchase?
@chadgjertsen19 күн бұрын
I ordered and received one recently. It was packaged poorly and came in a damaged crate. The parts had come loose in shipping, and since the crate was damaged the parts were missing completely out of the box. I now have to find nuts that match, keys for the rotating shaft so the bearings stay on it, and have to completely rebuild and level it again. You got one that was taken care of in shipment for sure….😂
@NGinuity2 жыл бұрын
I bought one of these back in April to do a small die-cut parts run. Ran it to cut a run of 650 parts because I can't afford one of the pricy die cutting machines. It took a little bit to get each side leveled out. It's HEAVY and works great. The only thing I did was put some synthetic grease on the surface where the cam bearings meet the springs and replaced the cutting board type material with the red clicker board surface. That tends to be a little easier on the dies.
@rowdyryderleather2 жыл бұрын
I ordered one based on your review. I look forward to having it speed up my cutting of small/midsize items.
@keystonepirate25345 ай бұрын
An update sir?
@christopherbergmann3248 Жыл бұрын
Tony, I watched this video and I was inspired by your results. I went online and purchased one of these machines. I do hope that one day it will actually arrive. So far it has been lost and nobody at Vevor has been able to bring any results. I will try again tomorrow. This is by no means an insult to you. I still want one of these machines, I am just going to have to wait longer.
@Iknowonlywhatimtaught Жыл бұрын
1 ton arbor press can handle small stuff. Where this press might be great for is larger pieces like wallet blanks so to speed up the cutting. O already use a 1 ton arbor press but would upgrade to this press before I would buy a larger arbor press. I did have a 5 ton arbor press but a family member stole it out of my barn and never returned it, so to keep peace I just bought a cheap harbor freight 1 ton. It works for small stuff like key globs and leather straps but would take time to use an arbor press for larger stuff. It would work bit I would lose to much time in doing it with the one I have. Thank you for the review and video. You did a great review.
@e.kreuseler18992 жыл бұрын
Danke Tony für dein Video. Wollte mir die Cutter Presse schon länger zulegen und habe immer gezögert. Hatte immer bedenken ob das Teil für diesen kleinen Preis überhaut funktioniert. Dein Video hat mich überzeugt, gestern wurde sie geliefert und ich bin sehr zufrieden und begeistert. Schwere stabile Presse, die macht was sie soll.
@SergeyChernyshev2 жыл бұрын
Interestingly enough, I got the very same model a few months back. The price is right for this press and considering that you also need to buy dies, it gets pretty small as you expand your library. Just need to sell all those leather items now ;)
@bbrachman2 жыл бұрын
Thanks Tony. Informative and pretty entertaining also. Love your music selections!
@compassleather2 жыл бұрын
Just ordered mine! Thank you for your honest review.
@keystonepirate25345 ай бұрын
Update after using? Thank you in advance
@compassleather4 ай бұрын
@@keystonepirate2534 I got rid of mine because I was having issues with it. But I'm looking into the updated one they put out. Tony has a video on it
@keystonepirate25344 ай бұрын
@@compassleather thank you so much 🙏 have a great day
@keystonepirate25344 ай бұрын
@@compassleather appreciate the feedback sir, hopefully the next one you get works well. Have a great summer
@rowdycatte78952 жыл бұрын
I bought one of these recently and to be honest, I was pretty disappointed all the way through. First off, it didn't come in a box at all, it was wrapped in plastic wrap. It didn't come with any hardware at all, including the handle, and one of the rubber legs was broken. It also had some weird shims screwed onto the bottom that I had to remove. I contacted support and they said they'd send a handle within two weeks, but they never did. I was able to jury rig a handle, but it never quite worked right, and without the wrenches included it was very difficult to adjust anything, and without the hex wrench especially the cam shafts get loose and they've messed up some of my dies. The thing needs near constant adjustment, too. It's very fiddly. In the end, I just made my own clicker press with a hydraulic press and some steel plates. Works a lot better, wound up being a lot cheaper even. If I am being honest, this thing is more of a hassle than it's worth, and especially since my order got screwed up.
@lisa2stewart Жыл бұрын
Just got one of these and I'm looking forward to using it to squish many things.
@Роман-б3е7жАй бұрын
Ваша шляпа и также очки, вызывают уважение и незаурядность! 👍
@jeremyfagergren2 жыл бұрын
I literally just bought the exact same one of these a few weeks ago. I immediately bought a slightly bigger cutting board. Dialing it it with the screws is a pain, simply because some dies are bigger than others, so you have to break out that huge heavy wrench to adjust the screws. Also mine didn't come in a box. It was barely held together with plastic and tape. Final thoughts? It does the job fairly well. Sometimes you have to pull that lever a few times for the die to cut cleanly, depending if placement of the die is more toward the back or the front.
@coolcool9742 Жыл бұрын
*मैन्युअल पंचिंग (डाई कटिंग)मशीन* 👌
@freewilly3212 жыл бұрын
Been wondering about this one, thank you for reviewing it.
@burntstuff11 ай бұрын
Got one of these. It needs proper bearings, as it wears pretty quickly where the horizontal bar goes through the two uprights.
@chrisweaver59172 жыл бұрын
I love mine. Now if I could just source inexpensive quality dies. 😉 I broke some 3d printed stamps so be careful to have the stamp centered on the tray.
@dwightpennington19252 жыл бұрын
Thanks Tony, I was looking at getting one!
@ronaldjones8346 Жыл бұрын
If during the leveling process you have the handle pressed and a die on the plastic you'll have a clean cut and no damage to the plastic.... Given you use different dies all the same hight,,, taller dies would still damage the board of course...
@sterileinstrumentsystems3168 Жыл бұрын
Thanks brother. That was very helpful.
@jamesleatherwood31962 жыл бұрын
I got the same results with a$50 1 ton arbor press and a press foot from the Arborpressguy, total under$100 investment. I appreciate the review, and wish it was permissible to get died made from Tony's patterns.
@junahn19072 жыл бұрын
I was about to post about that. The hydraulic press is a lot less muscle as well.
Can't wait for my die cutter machine to arrive, ordered a similar one from another brand.
@IraQNid6 ай бұрын
It would be a great asset for die cutting other materials that aren't leather. But if there are no instructions for its use, how do you know you are using it or setting it up correctly?
@corrinajwilliams2 жыл бұрын
I bought one months ago and had to carry it upstairs on my own,very heavy
@alain.cuir.artisanal2 жыл бұрын
hello and thank you for this video, where can we find the stencils for cutting leather? friendship Alain
@juliocesargonzalez9528 Жыл бұрын
Excellent review bro 😎 👍👍👍👍👍👍👍👍👍👍
@JessicaCEP Жыл бұрын
I got an uneven bolt situation, not square to the front, which is just sloppy, but it doesn’t appear to affect the ability to cut stuff…we’ll see how it goes
@LeatherandLight Жыл бұрын
Any chance you might be offering your Plague Doctor mask in clicker dyes? I’d buy this machine and the dyes if you did!
@Countessbathory7777 ай бұрын
Thank you!! 😊
@billymaan9815Ай бұрын
Hi. I had one of these machines and the pstons did not last 12 months!
@MentalHealthMtrs Жыл бұрын
Its a great machine U need to practice to use it well it can cut anything with a single click and u have to rise it a little more so that u don't have to put pressure
@anavgg Жыл бұрын
Hello. How do you adjust the height? My dies don’t fit
@everythingnnothingpodcast2 жыл бұрын
Thank you for sharing.
@Sean-ws9je7 ай бұрын
I Like That Man 😊
@Rockstars-Gig-Memorabilia Жыл бұрын
Great video..thanks
@lievesimons2180 Жыл бұрын
Looks great
@Lisapittsburghnurse Жыл бұрын
Any tutorials for notebook cover dies
@k1ngkan07 ай бұрын
What's the hole with the Allen screw on the plate in the front?
@matayanki Жыл бұрын
Sirve para grabar cuero a presión?
@WilliamBanks19929 ай бұрын
Would this work with cutting 7-8oz leather
@michealwalker4766Ай бұрын
Couild you cut thin sheets of non ferrous metal like brass or copper?
@DieselpunkRoАй бұрын
not really no
@IanWilliamson-e5e Жыл бұрын
A few days ago I received the cutter that I ordered. I'm new to all this so maybe I'm doing something wrong cause mine doesn't work. When moving the handle back and forth the top plate does not go up and down. Is there a trick to get the plate to release? What am I doing wrong? I have contacted the manufacturer a few times and haven't received any help. Any ideas would be appreciated.
@billyodamit87092 ай бұрын
I want one
@bobby.a9013 Жыл бұрын
If ordered, where can I get custom dies made ?
@anawilkes9077 Жыл бұрын
Hi Tony. I got this press using your code, thank you. It was extremely useful. Now my question is where or how do you make your cutters? I would like to have my own design made as what’s on the Chinese market limits me a bit. Thank you. ❤
@brianarmstrong2230 Жыл бұрын
Try Texas Custom Dies
@PourMeAnother Жыл бұрын
@@brianarmstrong2230 What thickness of dies can be used? Texas Custom Dies reccommended 1.25" Does this press accept that size?
@rachelgerber672910 ай бұрын
Weaver Leather Supply out of Ohio does an excellent job as well for custom dies.
@josh881132 жыл бұрын
My plates are level side to side but not front to back.
@nickking83172 жыл бұрын
Would this be ok starting out?
@noumanthaiyam8040 Жыл бұрын
Hello sir I am interested this machine but how cost deliver in Mumbai India
@giuseppecannata9792 жыл бұрын
Ciao , sono interessato alla pressa manuale ....
@cpergiel8 ай бұрын
what are the tunes?
@tuktuk_adventures2 жыл бұрын
Perst😁
@jollygreen26362 жыл бұрын
I've had one of these for over a year now and it's wonderful! However, being all steel, they can be prone to patina with rust in a humid environment. I rub mine down with Johnsons paste wax to keep it I good shape.