Vevor Next Generation Magnetic Drill Review (Vast Improvement)

[@georgebonney90]

It's nice to know Vevor is trying to improve their products. They should send you everything to test and critique

[@ljprep6250]

I think he, Joshua de Lisle, and a few others will be holding their feet to the flames so their products are well improved. I think Vevor wants to be another HFT, and I love it.

[@NoName-ml5yk]

Vevor doesn't make products they just slap stickers on them and they are still selling crappy mag drills not just the new and improved model shown here. If you read the reviews for even this one many are not running true. Did he say if he bought it or they gave it to him for free? Demo products sent for video reviews usually get a good quality control check.

[@seabreezecoffeeroasters7994]

@@NoName-ml5yk Please show us on the Dolly where the big bad Vevor touched you? Basic facts are as a supplier of Chinese origin product they 'generally' are better than the average. The conclusions here about the old ones being rubbish compared to this one was made VERY CLEAR!

[@flyzeyefab]

Just ordered one! Thanks for the review!

[@tsstn]

Thanks for the great review. No fluff, and plenty of useful information. I would love to see someone use this for power tapping though.

[@my49tube]

The "double V" that you refer to is called a dovetail. It is widely use on all sorts of machine tools and will have gibs to adjust out the play.

[@exelenc94]

Ordered one yesterday, VERY MUCH looking forward to it showing up in a few days!

[@benbangma6495]

Very good observation and it looks like a very healthy unit. Thank you.

[@Guido_Sarducci007]

Good info. Thank you! Ordered one directly from Vevor.

[@ljprep6250]

Excellent! I've been eyeing these for a couple years now and the wonderful new mfgr for Vevor's mag drills bring a helluva lot of improvement and accuracy for only $50 more. WELL worth it!

[@michaellindsay8934]

Fantastic job really enjoyed the review

[@mikemullenix6956]

You need to measure that runout with a dial Indicator. I would like to know what type of bearings are used in the arbor..nice review however, thanks.

[@marty4645]

Man I got this drill. Mine like yours was true till I started drilling. When I started drilling it started wobbling through the frame, not the chuck. Very disappointing!

[@garybrown9719]

I don't have any metric cutters so thats a plus

[@kevinbrewer9421]

DeWalt use's that same quick change cutters I believe!

[@elliotkane4443]

It definitely sounds like it was bogging down far more than I would expect in such thin material. Sounds to me like despite the upgrades it is still very much a budget drill and I'm sorry but I don't trust any commissioned reviews. Many, probably most mag drills have the ability to attach the handles from either side or even a 1/2" sq drive ratchet, extension, etc. Some units have a circlip, which is not ideal. I would consider an E-clip probably the most inconvenient method if you were trying to efficiently drill a bunch of holes, you are probably not going to remove and replace that clip too many times before you lose it, bend it or break it. All in all, looks fairly decent for the money, but I doubt it would last very long, You also didn't test the strength of the magnet.

[@bobrossi1185]

Wow you don't get those features with evolution wow wish I would have known or waited iwas looking for mag drills looked all vevor red and yellow but liked the height of evo42 and drilling but didn't come with chuck or variable speed could have saved money and more features . But I bought 3 other things from vevor and had good experience can't wait for the next knock off tool they come up with.

[@JD-ft2lr]

Really great review! Im really tempted by this model! But, the Nitto Kohki cutters are really expensive compared to the set screw type. I wonder if Vevors updated manufacturing is better (less runout/wobble) with the set screw models as well? That version has all the same features except no quick change and only 2 metric cutters (as per their website)

[@allen-gt5ng]

I will never understand people doing unboxing. Who hell wants to see that I see cardboard boxes every day I know what they are

[@paisleyprince5280]

Watch an AvE BOLTR where he uses the world's smallest chain saw to open packaging and you'll change your mind.

[@agrayrider]

✔️ing in.

[@donho3617]

It still reminds me of Central Pneumatic orange from Harbor Freight which equals crap.

[@GiveHevn]

Every VEVOR product I have purchased is subpar. But you might have better luck.

[@CJWang-fx8ru]

Thanks for the review! I just got my mine (1300W, 0-700 RPM though). I noticed that the base was quite warm with the mag switch on. I don't know if it is normal.

[@procyonia3654]

Thats normal, electromagnets generate heat under load.

[@boomslang404]

I'm about to buy a Vevor. However, I am confused with the different machines that Vevor has. The machines don't seem to have a model-name and the selection of the different sets doesn't work on the official site. I'm looking for a magnetic drill with speed control and automatic coolant control. I find the fact that the machine stops turning at low speeds under load to be a disadvantage. To me it looks like they just used a rotary resistor instead of frequency control.

[@COM70]

9:35 imperial is the phrase I think. With the old one, as it wore in a little, it had a tendency to drift slightly with the torque applied to the rails, is this still the case ?

[@kkendall99]

Woke up and thought I was watching a commercial.

[@nezamshalchi]

Reason for turning left on right it's because of this is Tapping machine too

[@jakubpukovec7755]

What's the quality of the drill bits? Does it worth to buy drill bits of any other brand instead or these are pretty good quality and last long?

[@함유식-t6x]

아주조아요

[@boosted2.4_sky]

You can still use metric annular cutter's with metric nuts and bolts...🤷‍♂️BIG CAT 🐈 13:55... Or use the strap that they send with the unit or both....

[@minnesnowda2510]

for the price u cant beat it if ur trying to fix ur own trucks etc

[@jimyoungblood1687]

How do you operate the dual slide range?

[@jimrow6704]

Bought one but can't find bits that fit. Anyone else have any luck?

[@CatusMaximus]

It uses Nitto-Kohki cutters, There is also an adapter to go from the jet broach shank to standard Weldon.

[@moonmadman]

If you contact Vevor, they have an adapter (Nitto to Weldon) and will send you out one for free (Weldon bits are half the price of Nitto) and those of us who already have Weldon bits would find this 'improvement' unworkable.

[@CALDues]

It's now $450ish on Amazon, still worth it?

[@NoName-ml5yk]

No

[@ammogiant824]

How cone you don't use cutting oil?

[@CatusMaximus]

I was just drilling through sheet metal, just sprayed a little bit on the cutter...

[@rsz90182]

That wobble is way way too much for my needs. Ohh man that's a bummer.

[@Superimperator]

9:37 Ha! Now you lucky bastard have the chance to join the great world of Metric Units, use it wisely my friend from overseas! :P

[@nvrndz]

Catus - what is the stand that the drill is sitting on? Thanks

[@CatusMaximus]

It is my bearing press, it was an old simple tensile testing frame, that is why it is so overbuilt for it's size.

[@nvrndz]

Thanks for the quick reply; starting to examine what I'll need for the Vevor 1400 w setup.

[@MSJONESBLOUNT]

1st

[@Death2Weebs]

Never buy a cheap mag drill…

[@jlawlar]

goodbye frozen lol

[@cliff4377]

Ha WTF bluescreen bs