VGR V653 Better Than Wmark Version?

[@JMacomber]

I purchased the V653 and installed the Wahl fade blade. I also replaced the spring and cap inside the lever with better quality now the lever click very good!! This clipper is a monster!!

[@nick-cb3oh]

Which spring and cap did you use for the lever?

[@elliottharrop5031]

@edo can you please do a review/unboxing of Bill Pro BL500? I just bought one from Ali, it looks interesting, has interchangable heads (one is taper blade and the other is fade blade, you just take the one you are using off and snap the other on), 9w power, 9000rpm, 4.5hr run time. I would love to know what you think. I can send you video of rpm test when I get it if you want. Interested to see the build quality.

[@KapitanDragen]

I'm not a hairdresser, just a regular user.I bought a vgr 653, shaved my head normally, but then naturally unscrewed 2 screws to clean the inside.And after I cleaned, oiled the blades, screwed the screws back on and turned on the machine-it started making a WILD noise.That is, it is so loud because it is powerful.But I shaved her head for 30 minutes and I remember that the noise was quite acceptable.And there is clearly an abnormal sound.The device cannot be returned (hygiene item).I'll take it to them at least to see what's the matter, I live in Azerbaijan.I'm sorry about the purchase, I fell for durability (powerful motor and DLC blades).I've been using the most for 3 years cheap Panasonic white color-no problem.There were no fkn screws, the blade fit perfectly into the machine without distortion.

[@bosshugo6287]

you dropped the blade on the ground.

[@KapitanDragen]

@@bosshugo6287 no, I showed machine to my friends (because the seller simply did not pick up the phone) and one of them determined that the inner plastic with springs was inserted incorrectly. Machine is fine now.

[@OGMoonieReacts]

just bought the clipper, waiting on it to come... i wanna do a blade swap. wich blades will fit? i already have an extra Gamma, Andis and Whal blade.

[@gusb4309]

Bro I'm so upset I don't know what I did to the lever but I changed the blade with a faper blade and thought I could chsmge the brackets to put a Andis master blade and now the lever on the vgr 659 it feels weird I think lost a part on the lever like a spring or washer? I don't know it doesn't tighten anymore

[@wirdani6740]

Tolong Adan perbandingkan mesin vgr ini dengan wmark Ng 9002 lebih bagus mana..🙏

[@literallyrandoms]

does the blade gets over heating during hair cuting? because the RPM is too high and i wanna make sure of that.

[@Red.exe7]

How does this compare to the TPOB machete?

[@NewKino_911]

Wemark vs Vgr Which one is stronger?

[@lianronjani1050]

Is clipper blade same with wahl blade or the other? Please ....

[@carlosjuarez3206]

Which would you recommend between this and the vgr v 682?

[@NextGen-Awfisial]

I would choose this because it comes with DLC coating blade.

[@anthony14]

How does the VGR compare to babybliss boost?

[@donfelichebarber8233]

Bro, this video will help you reduce the sound on the typewriter, you need to make sure that the lever does not touch the body

[@donfelichebarber8233]

kzbin.info/www/bejne/fWLSoJSgoJ6IqrM

[@klembute10]

we need to see his guts!!..💪

[@edounboxingofficial]

I don't understand what you mean

[@klembute10]

@@edounboxingofficial see inside. sorry, my english is very bad.. :)

[@Vleendz]

Do u think a gold jrl blade would fit on the vgr 653?

[@eliasboltsis5882]

This or madeshow M10?I want it for fade cut..

[@joemartinez21024]

Do a cut with it

[@allmakk410]

Hi nice video...as vgr v653 better than kemei 2296

[@brgy-tanod7884]

Sit edu. Can you make video review for MRD supertorque hc3969. ☺️ TIA sir

[@edounboxingofficial]

It's the same like Kiepe Precelta

[@selimt7134]

danke 🙏 hatte mir die maschine schon angekuckt und überlegt mir die zu bestellen . am 15 april kommt der trimmer den du vorgestellt hast vgr v 970 . hab den für 21 euro inklusive versand bestellt , ich bin wirklich gespannt . ich werde berichten ob mir die maschine gefällt . als nächstes versuche ich den monster clipper mit hybrid blade zu testen , habe große hoffnung das der gut ist . meinst du der monster clipper ist sein preis wert , wenn man zum beispiel diese vgr aus den video dagegen vergleicht für ein bruchteil des geldes ? vielen dank für das video ! bin gespannt auf deine nächsten videos .

[@edounboxingofficial]

Ich hab gedacht AliExpress Liefern nicht mehr nach Deutschland oder Österreich

[@selimt7134]

doch ich konnte ganz normal bestellen

[@selimt7134]

zurzeit benutze ich tatsächlich nur die panasonic maschinen zum haare schneiden und als trimmer benutze einen von vgr der sehr gut 0 schneidet aber leider nur von unten nach oben und nicht so gut wenn man von oben nach unten rasiert um konturen zu machen . ich habe noch den wahl beret der immer sehr gut dazu geeignet war leider ist mir der kopf kapput gegangen und ich habe ein neuen kopf bestellt und eine komplett neue maschine , leider haben sich die köpfe geändert und sind nicht mehr scharf um richtig zu hitten . ich werde versuchen die köpfe vom beret zu schleifen

[@carlosjaimes4141]

I bought the vgr

[@EkoPrasetyono-w5d]

Kemei KM 1763 is than silent

[@pusong6742]

its a monster if use a stagger tooth blade

[@edounboxingofficial]

Really?

[@Tino2o9]

Was it a direct fit? What blade?

[@johns.felizmendez4913]

What app did you use to get the RPMs?

[@edounboxingofficial]

Check my old video

[@drexlerramos4780]

man just tell, i know u trynna get views but gaddahm 😩

[@johns.felizmendez4913]

@@drexlerramos4780 I found it, it's called Giri the rpm checker

[@wilsonducortefreestyle7450]

Top tenho 2 vgr magnética

[@edounboxingofficial]

Good

[@J1c80]

Whats better this or the VGR -V-682 ?? @EdoUnboxingOfficial ??