Vicrez Demon Widebody Kit vz101768 | Dodge Challenger 2008-2023 | Installation Video

[@abhinavpatlolla4144]

Great jobs guys 👏🏻 you should also have one garage in New Jersey. So that we can come directly to you guys for the installation for WB.

[@vicrezcom]

Thank you so much

[@QuintonMoore-xg3qv]

🔥🔥🔥, gonna do my wide body kit next year so like 8 months can’t wait !!

[@vicrezcom]

😊️

[@carlosarteaga3179]

I will for sure buy this in the future with the widebody wheels

[@doctorqbert7643]

May have to cut the fenders for tire clearance

[@antoniomitchell1883]

No you wont

[@LowLifeMods]

The kit really does have some good overall fitment. 👍👍

[@vicrezcom]

Thanks for watching!

[@nl9002]

No it doesn’t lol

[@swaggyp4081]

@@nl9002 Have you used this kit before? I ask cause I’m looking for a challenger now and wanna kit it in the future so any feedback is helpful

[@MansaMusa-v5q]

@@nl9002stfu you prob don’t even have a challenger….I’m a scat pack owner and I can say that’s the best installation I seen on KZbin looks like it came from Dodge

[@nl9002]

@@MansaMusa-v5q when I commented I used to have a challenger RT but ditched the boats for a PP1 Mustang GT. And your a ricer for thinking that’s good figment look at the wheel gap.

[@sumcrazydude]

Nice, it's a lot of work but it can be done

[@Lestersrthellcat15]

Great job guys ...I'm looking for someone to do this job in Miami Fl

[@vicrezcom]

Thank you for the kind words!

[@suny_3922]

Wish I had sanded the inner fender flares, explains A LOT 😅🤯!! Thanks, great video 💪

[@vicrezcom]

never too late :)

[@AndreGuerrieri]

You guys sell widebody wheels... Why put the stock wheels back on the car? Could have used this video to promote the fact that you sell WB factory reps but instead you put the factory wheels back on the car which look ridiculous.

[@vicrezcom]

We didnt have them in stock in that time but now it has the widebody wheels

[@AndreGuerrieri]

@@vicrezcom Well then I would love to see an update/follow up video with the wheels and how the kit is holding up

[@TeW33zy]

Same thing I said. Now he saying oh we didn’t have the wheels but now we do still is ridiculous, hard to undo ↩️ my mind, u don’t get a second chance on a first impression. That ridiculous setup stuck in my head for life.

[@jamesgallman138]

Put those 305 on that guy

[@Vavi_Zoo]

Yall hella critical relax

[@Scoobems]

Self tapping screws directly on the body? That's going to rust really quick for sure!! Wouldn't be better to add some type of body molding from water seeping into the drill holes on the metal fenders?

[@MILMI123]

What I was thinking too

[@vicrezcom]

😊️

[@krispykeyog]

Do you have to cut your fenders on a scat pack or what are the requirements for perfect fitment ?

[@DV8TA2]

On a V6 SXT. I wanted to do this to mine but I’ll wait till I pay off the car first lol

[@glennmoore3747]

Wow, this different. I've seen a few guys cutting their fenders installing widebody kits, even this one. I guess they were doing it wrong.

[@SRT_DRE]

You have to cut your fenders bro. If you don’t, you’ll lose your flares.

[@outlawperformancegarage5211]

@@SRT_DRE that’s what I’m talking about. If you put wider wheels on the car there’s gonna stick out past the fender. And when your shocks load up the wider tire/rim is going to hit the widebody bracket. So how do you get the measurement for the amount of fender you have to cut out for the bracket they provide?

[@SRT_DRE]

@@outlawperformancegarage5211 you don’t have to cut off much. Only about 1.5 inches for clearance. You should be able to see others cutting their fenders on KZbin. But if I’m you, I wouldn’t cut them. Your best bet is to do it the OEM way. You can buy widebody fenders and flares from Dodge or a OEM parts website sponsored by dodge. And as far as the quarter panels, you can buy the widebody quarter panels and just take those to your local body shop and have them install them. Not sure how much it would cost for the installation. But the quarter panels cost around $700 each. Once you cut your fenders, the value of your car drops by a lot . Plus, if the work isn’t done right you would regret it. I know from experience.

[@outlawperformancegarage5211]

@@SRT_DRE I appreciate your response. In my case the car sits in the garage on the carpet all week and gets driven on the weekend sometimes. Never hits the rain. If I cut the fenders I’ll have them welding in place so that if I did hit the rain nothing would leak through. Third for 700 offender I would rather get the demon 2.7 supercharger and replace my 2.4 supercharger and make some real power. i’m already at 800 rear wheel horsepower. And I just put a Demon engine in this car. So that’s super charger would be the next thing I spend money on. I was only thinking about cutting the fenders because my car is lowered and I want to get a mean super wide rim in the back. Definitely didn’t want it to rub.

[@SRT_DRE]

@@outlawperformancegarage5211 I feel it, you put a lot of money into the car. If you cut the fenders you can’t get them back. All I’m saying is go the OEM route. It will increase the value of the car and it would be an OEM widebody like it was out the factory.

[@elijahpeck5922]

Did they use spacers bc those rims are stock

[@MiguelCardona-b9q]

What size of wheels and tires do you need after the widebody installation?

[@vicrezcom]

www.vicrez.com/custom-wheels?ajaxfilter=manufacturer,vicrez-wheels/search,-2.5&tracking=vicrez_widebody_kits_store

[@LiveLifeWithAView]

Why are so many people cutting their wheel fenders when adding the wide body kit. Yet you didn’t need to?

[@nathantv8257]

They got wheels and tires that were bigger, that’s why.

[@outlawperformancegarage5211]

@@nathantv8257 Yeah we know that for sure but when we went running those wider wheels and tires and the suspension flexes that Tire is going to hit the upper fender. So why doesn’t the video explain why they’re not cutting that fender. Because once that tire extends past that fender anytime it flexes you’re gonna have a big problem.

[@inspectz13]

Man i need this, looks good

[@AnthonyPriest]

dope video, thinking about ordering this kit for my 15 R/T. can u put a wrap on a vehicle over the fenders ?

[@carlosdaniels9515]

Total labor cost? Paint to match labor & installation labor?

[@Equalizeryam]

You ever find out?

[@Mikeyyy1x]

What’s the 3mm tape measure for all 3? 10:15

[@SRT8EmUp]

does the bumper come with all the hardware? like bolts and screws etc.

[@josesaucedo3199]

will this fit a already widebody challenger i just to replace damaged flares?

[@phat-b6771]

On the 2010 challenger can you use the stock lights or do you have to update the headlights to the newer style ones

[@j.p.durham9034]

After I install the kit, what size wheels and tires do I need front and back for a flush finish

[@Liltoat]

did you find out sizes?

[@riguitocastaneda7725]

En que ciudad están localizados ustedes????

[@oforkansi]

does the kit actually come with "WIDE BODY FRONT SPLITTER" ? All I keep seeing is the skinny body hellcat splitter or the skinny body srt splitter....

[@REALSRTP]

Putting in the upper grill, how did he put it in ? Top first ? I’m having trouble

[@StraightOuttaContent]

Sick kit. @modfx just put this kit on a Challenger

[@vicrezcom]

yes they do a great job!

[@RobertEdits]

I’m about to go see a 2012/13 challenger rt for about $2500 later this week. It’s missing a few things since crackheads had it last and it’s been sitting for a while. I plan on doing this because the 09-14 body style is not appealing to me. Hopefully I can afford the tail light and headlight conversion too lol

[@eddie1199]

did you buy it ?

[@RobertEdits]

@@eddie1199 finna look at it again later this week, haven’t bought it yet. It’s missing a driveshaft and gas tank

[@eddie1199]

@@RobertEdits i bought an 09 rt for 4,500 needs body work maily few electrical

[@DanielLopez-dv4uw]

@@eddie1199Facebook market place?or where’s a good site I can find vehicles with minor work needed?

[@Davidsweirdness]

​@@eddie1199where can I get something like that?

[@AshesFade]

Are those just small self tapping screws for the fender flares?

[@zesusflacko]

Could I keep my 2012 challenger rear bumper on it or do I have to get a 2015+ rear bumper

[@HDA_III]

Is drilling really required????

[@jeffella2748]

So what happens when the 3m gets wet from rain and ect will they fall off

[@davidmatamoros7130]

how can i have this installed on my challenger shaker but have you professionals do the installation? i love and trust the way you all work on vehicles

[@antoniomitchell1883]

You can’t.

[@busterc6600]

David im having my 1320 done by dodge power broker in tucker,georgia next month

[@ivanguillermo5035]

This man’s voice is raspy

[@vicrezcom]

😂

[@DV8TA2]

Is anyone else cringing at him dragging that freshly painted bumper across the cardboard too?

[@triggahappyadventures751]

My kit does not fit, the side marker lights do not line up on the front and are at least 1 inch out. Please help

[@outlawperformancegarage5211]

I have a 2015 hellcat challenger lowered 1.5”inch. Do you have to cut the fenders to get the Wider hellcat redeye rims to fit?. If you do have to cut the wheel well fender Will you still be able to use the bracket that comes in the kit for the widebody fender?

[@Jdmtunerlover]

Part number for the 3m tapes?

[@floresandrea7]

How do I go about making an appointment to install a wide body with you guys?

[@vicrezcom]

Unfortunately we dont offer installations.

[@DV8TA2]

Of you’re going to uses any screws on this, uses stainless only or you will be in trouble later when they rust to the body.

[@jeffreyshepherd8488]

Definitely should have at least put some paint on the holes

[@Kaptions_Kaught]

Where are you guys located? And how much to install

[@shortbedgameskreshfulloffi1826]

So this will fit a 2010 srt8

[@babydriver8844]

What if we want to drill instead of using 3m tape

[@kenken7534]

Did you have to get wider wheels/tires?

[@EnvyLeon]

you will need to get 305's all the way around and personally i would shop and try to find used OEM widebody rims

[@Antonyog7]

Where the closeouts go? Aka the 2 black pieces of plastic… also all the other screws?

[@TIRADORACING]

👌🏽 Great job!

[@vicrezcom]

Thank you! Cheers!

[@samhack3260]

If you wanted to add spacers instead of getting all new wheels, what spacers would you need?

[@discoverage2569]

^

[@selfpaids8046]

@@discoverage2569 1.50”

[@StockCarGuy]

the factory 305s can fit the non widebody cars correct?

[@micheljean7845]

Yes, i was running 315 on a 20x1 wheels on a narrow body hellcat.

[@micheljean7845]

happy to help

[@mikey6352]

what offset were your wheels?@@micheljean7845

[@eazyyzeezyy2696]

Do the fenders come in a separate box than the front bumper and grill

[@djroughrider27]

You guys have link for the 3 types of tape you used?

[@vicrezcom]

we will start selling the tape soon :)

[@aceklub2k5]

Vicrez y’all need to sponsor me with all the shit I put on my car from you all...wide body kit to demon hood smh.

[@angelchavira31]

What did you do with the front bumpers fog lights? Did ya cancel them out or how did ya go about it?

[@vicrezcom]

they got cancelled out

[@marcocastillo6083]

How did yall take the bumper brackets off from the original bumper ??

[@mclaurinxjuju3647]

what year are you installing this on?

[@brandonscott1707]

What size self tapping screws did you use?

[@RCDC1716]

Will the fender flare kit fit on a 2021 rt?

[@vicrezcom]

Hello, yes it would

[@glennmoore3747]

Are there any issues with the front fender flares being installed with the factory front bumper on a 2016?

[@vicrezcom]

If you do it to a non demon bumper yes.

[@angelchavira31]

Im having trouble with the plug in for the wide body marker reflectors on my 2011 challenger.. the wire harness for the stock oem reflectors have the plug in for a bulb. On the new widebody reflectors it had the LED plug in which is different than the oem.. is there an adapter that I could use or how could I go about this issue?

[@kasembazzi4040]

Can you guys please provide the links of the 3m tapes and adhesion promoter for fender

[@MrAhkhan89]

Good job, be careful with scratch/swirls on a paintjob, i am not professional but i would never put bumper cover facing down or put bottles/tapes on the hood ..

[@Vavi_Zoo]

How much for the kit and installation

[@vicrezcom]

Unfortunately, we only do in-house installations. But we do recommend body shops just depending where you are located. www.vicrez.com/vicrez-demon-wide-body-kit-vz101768-dodge-challenger-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019?search=vz101768

[@prfxshn2004]

So will I lose the use of my fog lights?

[@davidmatamoros7130]

Do you guys have a shop in Cali and if so where?

[@calebnovosedliak9509]

Does my 2008 OEM headlights need replaced to install new bumper

[@vicrezcom]

2008 Dodge Challenger SRT8 Coupe 2-Door (Headlights will need to Upgrade to 2015+)

[@panama2500]

Is this challenger a V6?

[@barlosnation3806]

how much would yall charge for you guys to do this for me ??

[@Luis20221]

Does anyone know if these are the exact same size and dimensions as the OEM ones? Every video I’ve seen of these aftermarket ones, they seem to be more bubbly (a more round curvature) while the OEM ones look a little more flush to the body of the car. If that make sense

[@babydriver8844]

They’re definitely not exact they’re just quality aftermarket fenders the oem fenders are not thick all the way through they slim up closer to the bottom of the wheels yu can tell if you go to the dealer and look at a widebody in person

[@Malseph]

Toredo racing did a video on them. These are actually a bit bigger and wider than OEM.

[@DaleGribblerosky]

$2500 bill and I'm telling the customer sorry your polycarbonate flares came out of the box warped.

[@vicrezcom]

Send us some photos and lets get this resolved. They retain heat in the shipping containers but have you tried applying heat? Poly takes its original shape once reheated :)

[@kitz892]

Does this also come with the lip for the wide body kit ?

[@vicrezcom]

Yes sir

[@kingdavid7741]

Any modifications when u add widebody wheels??

[@vicrezcom]

Hello, no as long as you have enough wheel space you would need to do more modifications.

[@jcarney910]

Where's the widebody kit? All I see is some stick on fender flares 🤦🏼‍♂️

[@mopar392ta3]

Let me whisper Bumper bumper bumper bumper

[@feed68]

I need that kit it's bad ads 👍

[@johnnyangel636]

What kind of shop can install this ?

[@o.moonface.o]

Do you guys offer pre-painted parts?

[@vicrezcom]

no 😭😭😭

[@coleg3295]

is there a way to keep the fog lights or no

[@vicrezcom]

that would require custom work

[@beastgames9391]

Does this come painted? If not is there an option to do so?

[@vicrezcom]

It comes unpainted

[@josephpeart781]

Hope they upgrade the wheels

[@artyom63]

I think it doesn’t look the same as the original widebody kit. Or maybe you need wider wheels to match the kit 🤷🏽‍♂️

[@TeW33zy]

I hope u didn’t upbadge a sxt

[@DaleGribblerosky]

There is generally no surface area with the ridges along the outermost edge of the flares. Even with the fitment I have no confidence to tell my customer they will stay adhered.

[@vicrezcom]

Lets get this resolved 🙌 [e-mail]

[@outlawperformancegarage5211]

That’s what I’m talking about. And what about when it’s 105° outside that 3M tape is going to let go of those front fender wells and that widebody flares gonna pop off every time. How do you fix this problem?

[@jessearrizon1974]

How much for a kit like this?

[@DV8TA2]

I believe it’s around $4500 CA.

[@anthonymelendez7218]

How much does the whole kit cost?

[@vicrezcom]

fenders are $689 the while kit is $1349

[@ciroc974]

Did you have to cut any

[@jeanbuote282]

275/45/20 yess you got to cut your fender !!!!!!

[@jeanbuote282]

6 month it will take off

[@ciroc974]

@@jeanbuote282 how much you charge to do it for me

[@mr_angry1482]

Wow, that looks silly with those stock wheels. 😂😂😂

[@vicrezcom]

😀️

[@predatorking300c6]

Don’t be a fool and put that stupid 3m on. Your flares will come off. The 3m doesn’t work you have to glue the flares on.

[@hellonwheelz3317]

I agree..... I think panelbond would be what you'd want to use.

[@davejones1959]

From the video, it looks as though the paint in shade or two off.

[@suvyyd421]

Bro put a widebody on a 3.6l v6😭😭

[@crazypkm]

That’s not the right bumper vicrez !!!!!

[@p0lar82]

Nah its a better bumper

[@crazypkm]

@@p0lar82 I have it and compared to a regular hellcat front bumper for the challenger the oem hellcat bumper looks LEAGUES better and I’m a customer telling you this bro. If you don’t believe me you’ll see the difference between a real and this one someday.

[@SweetLifts321]

Has it fallen off yet

[@Isaacp49]

All that for it to still go slow

[@primepedro]

bro this guy sounds tired ash and doesn’t care much to give the tutorial

[@vicrezcom]

It was a very long day sorry!

[@busterc6600]

wow no cutting required

[@vicrezcom]

Yup

[@user-gy3yi1yu6e]

Fender flairs lol not a wide body in my opinion

[@sebinrobovic9368]

He didn't show gap on top of fenders they not fitting at ll and they say driling is not required at all but u have to drill that tape can't hold nothing one week all will fall of fenders are not made to any challanger or charger body right I take my car to Profesional body shop they only working on challanger and chargers and mopar cars and they couldn't make them stay properly they keep pulling of from car do not buy or purchase any of these I have pictures had to pay body shop labor and paint for nothing

[@bronsonguzman5078]

I see a lot of gaps

[@vicrezcom]

where?

[@eddieroach8026]

Who the duck would want a demon widebody kit on a non demon🤦🏾‍♂️

[@Shadow_of_Yharnam]

Even worse it’s a V-6 and that wheel fitment is god awful

[@nathantv8257]

@@Shadow_of_Yharnam that’s not the permanent fit. They said that in the video.

[@nathantv8257]

Someone who likes the look but can’t afford a demon.

[@navsparks3192]

What’s next? A Hellcat callout on the front fenders?🤣

[@NavyOrdy1]

Your narrator sounded like he just smoked a fatty or just woke up with a serious hangover. Wow, a very budget non professional walk through. He kept stuttering, yawning and used a lot of Umms, and put me to sleep. The one positive thing was myself and my coworkers got a kick out of it.

[@justinsenna2438]

Justin

[@rtm6930]

She needs a plastic screw driver 🤦🏾

[@vicrezcom]

I will get one next time ;)