VICREZ WIDEBODY KIT INSTALLATION AND PAINTING (2020 CHARGER)

[@brandonwilson15]

I have watched what seems to be 100 videos on this because I want to do it right the first time. You have by far given the most clear breakdown. I am relieved and looking forward to this process now.

[@TLucci6]

How is your process bro ?

[@wealthy4387]

What website did you order from

[@Snows_Cold]

But it’s not correct bc he will bottom out

[@5Lbased]

@@Snows_Coldas in the tires will rub on the kit? could you elaborate? i’m still trying to find the best solution for that

[@Snows_Cold]

@@5Lbased 'my buddy did the same kit we found going with 1.5 inch wider tires works perfect with no cutting needed, anything wider and you have to trim the inner wheel well

[@pr-_-kingg1313]

Your amazing. Thanks. You wiped all my stress away on how to install the right way, there’s nobody out there showing it like this

[@PHARRAWAY]

Anytime brother trust me do it like this and you will not have to drill into your car

[@georgeperez6114]

Best installation video I’ve seen bro! Thank you for going step by step.

[@NaijaNinja07]

Wanna do this with my grand Cherokee but I subscribed just because you’re super thorough and I fw that!! Keep doin you!!

[@PHARRAWAY]

Thank You brother

[@CoreyS93]

Definitely the most in-depth, step-by-step video I've come across for this kind of install thus far. I still don't trust myself with doing the painting myself lol but I feel a lot more confident with installing the kit after watching your video a few times. Really appreciate you taking the time to break everything down and include the products used along the way. I did have one question regarding your tires and fenders. I've seen a lot of videos where people experienced rubbing and had to cut their fenders. Have you experienced any rubbing since first installing it? Also, what size tires are you using?

[@PHARRAWAY]

Thanks and about the rubbing no not at all but my suspension is stock as long as you leave it stock you are ok

[@copycat.videos]

As usual. Good and clear instructions. Great video bro.

[@81mccabe58]

Do you have to add spacers to the rims if they are not 10.5+ inches wide?

[@PHARRAWAY]

@@81mccabe58 no not at all

[@nitrokyosho]

Amazing how to video my friend you did a great job probably the best video on youtube.

[@PHARRAWAY]

Thanks brother 🙏

[@nitrokyosho]

@PHARRAWAY no problem my friend

[@cvvmario]

I have a stock 2021 scatpack, stock wheels/rims. Will I be able to just slap the wide body fenders on ? Or do I have to upgrade my tires and rims

[@PHARRAWAY]

You will need to upgrade o4 add spacers to your rims

[@josephhernandez6661]

La neta looks good , been watchn vids but wasnt sure , your vid definitely was detailed and very instructive Thanks G

[@milaperegon2787]

Hello, i have to use a little bit of JB weld to create a tunnel? Just to fill up those fins?

[@bigl3626]

Looks super crazy amazing lol, I would just have to lower it 1 inch , looks a bit high in the back between the tire and tire well

[@suqmadiq68]

Nice job. The car and the video. Really well done.

[@jamesanderson2069]

I saw a video of someone saying that they had to replace the back doors to widebody doors. Did you have to do the same or did you apply the product?

[@PHARRAWAY]

no not at all

[@jamesanderson2069]

@@PHARRAWAY OK cool nice job by the way

[@JohnWD40TC02]

Hi Pharraway, the widebody kit makes the car looks so much better, it has a more aggressive (meaner) look and it looks like it was a factory install which means it's a very good quality kit, love the colour of your car as well🙏🙏👍John UK.

[@PHARRAWAY]

Yes it does brother Thanks for stopping by

[@r.m4102]

Looks GREAT👍 GOOD TO SEE THAT U GOT A CHANCE TO WORK ON YOUR PERSONAL VEHICLE 😎 keep up the great work 🙏

[@michaelpast19]

Do you have to drill or cut any metal ? I’ve seen videos where people have to use angle grinder to cut the rear fender

[@skylimits313who9]

Im new to this but did you not install the front bumper?

[@jjlovelace109]

That’s what I wanna know I have a 2019 R/T trying to see if I need to change front & rear bumper to add WIDEBODY

[@adnandavid6760]

@@jjlovelace109no brother, if you only bought fender flares you can just install it with the current front and rear bumper you got. But if you got the full kit then you’ll change everything. By full kit I mean that is included with rear and front bumper

[@TrentMclemore-c3s]

Every video I seen they cut the fender what I want this kit for sure

[@PHARRAWAY]

There is no need to cut if you leave your car stock

[@81mccabe58]

That’s only if you are lowering

[@Trucklifelu77]

Thanks for this video . Does it rub at all without cutting ?

[@tommcw5149]

What is the method you used to get the tires and rims to be even with the wide body kit please?

[@PHARRAWAY]

A 10mm spacer

[@tommcw5149]

@@PHARRAWAY thank you. Your most informative

[@Mustafadroid]

Diablos manito te quedo bien Fino. I already bought my kit am just waiting for some warm weather n am going to do everything u did. Thanks alot mi brother

[@PHARRAWAY]

Awesome brother

[@PNWX_Ro]

Looks good! Wasn't sure if you were going to put wheel spacers on but I'm glad you did

[@PHARRAWAY]

Not at all I got 20x10 front and 20x11 back so it was perfect fit

[@PNWX_Ro]

@@PHARRAWAY oh haha it must be my eyes then. The wheels looked flush with your car before you put the wider flares on.

[@keithstephens7395]

Do you have any rubbing of the wide body kit if not what size tires are you using I see that your rim size is 10 front 11 rear thx

[@PHARRAWAY]

@@keithstephens7395 No rubbing at all with stock suspension also the front tire size is 20x10 with a 275/40/20 and rear is a 20x11 with tire size 315/35/20

[@franciscoesparza5447]

Yo can you add a wide body kit on a 2019 charger scat pack also the wide body tires??

[@PHARRAWAY]

yes

[@franciscoesparza5447]

@@PHARRAWAY thanks for the info

[@bhagrt]

So, I'm looking into this for my Daytona, but I wanna know how it holds up, how's it honestly held up for you over this year past uploading this video?

[@PHARRAWAY]

so far it's still holding strong

[@bhagrt]

@@PHARRAWAY That's good to hear, and for stock ride height, is that performance package lowered "stock" or the complete bonestock suspension? Because I'm gonna get 305s and 275s for mine, but obviously gonna cut my fenders so there isn't rubbing, but I may rock my 245s before I get the tires.

[@PHARRAWAY]

It's stock hight

[@chingon5630]

Hey bud , do you know why my front tires are rubbing the wb flare ? In the front I have 275/35/20 with a 2in spacer . It already broke piece of the bracket that holds the flare .

[@PHARRAWAY]

Did you lower the car?

[@chingon5630]

@@PHARRAWAY no sir not at all . With that rear tire size 275/35/20 and the 2 In spacer , it only has one finger of clearance but rubs all the way down the road and already fucked up the bracket holding the flare . For the rear I have 275/40/20 with 2in spacer and no rubbing at all .

[@therealcurvegod8945]

@@chingon5630 what trim? SXT, GT, RT, Scat, or Hellcat?

[@chingon5630]

@@therealcurvegod8945 scat pack . But the issue was the 2in spacer , go with a 1.5 . And you do need to cut the front and back no matter what .

[@therealcurvegod8945]

@@chingon5630 you’re correct. 1.5 spacer is the max. I’ve seen some go 1.25 but that’s not really necessary. Scats, Hellcats, RT have a lower suspension so cutting may be necessary. My friend didn’t cut her scat tho but still has rub SXT, GT, SE does not require cutting unless lowered

[@CourtakaYkSlim]

So how is it still holding up? Thinking about widebody my car but I don’t want to cut it. This one of the best videos I’ve watch and I’ve probably watched it 20 times since you made it 😂

[@PHARRAWAY]

still holding up good no problems at all

[@CourtakaYkSlim]

@@PHARRAWAY thanks I really appreciate it

[@brandonwilson15]

I just want to add to this thread that OEM wide body wheels fit 2012 dodge challenger stock suspension, no cutting. 20x11 -2.5 offset all the way around

[@PHARRAWAY]

Yes they do I had to do NO cutting will work only with stock suspension

[@781coolmind]

Dam good video first time it made me sure of how to do this wide body…great job.

[@KoalityStudios]

Looks great man i have been debating doing this to my charger but i always thought you had to cut the fenders. Question do you know if this charger has spacers or and offset on the wheels? They seem like they are sticking out more than stock

[@_rtmafia5745]

I bought wide body wheels on my stock scatpack and its hitting the front fenders everytime i go over bumps. What can i do i alreasy have the wide body kit and everything

[@adrian7091]

Where’d you get the black moldings from that go on the fender

[@PHARRAWAY]

Yes

[@jasonlopez3469]

So I’m going to assume you aren’t on lowering springs or anything but not sure. I am on lowering springs and want to add a wide body kit and I’ve seen videos of people cutting their fenders have you had any issues rubbing since you didn’t cut the fenders ?

[@PHARRAWAY]

Hi no my charger is stock on suspension, but if your thinking on adding a widebody kit with lowering springs you will need to cut the fenders, I have no issues with rubbing

[@Trapped43_N-SB]

DID YOU HAVE TO INSTALL ROCKER PANELS TOO???

[@PHARRAWAY]

yes

[@Hitch_49]

Psimt came out beautifully. I got my smoke show painted to nardo grayz very similar but i love the nardo gray

[@alexander_3923]

Best video i have seen on youtube most people just cut the fenders but i dont wanna do that because what if i want to go back to normal

[@TruckingWithKhaled]

Did you use wheel spacers?

[@Ubaldo559er]

Did you add spacers? If so, did it rub on your kit, or did you get smaller tires?. Just wondering because i just recieved my wide body kit and i wanna do it right the first time. Thanks for the video, very helpful.

[@PHARRAWAY]

I do have 15mm spacers and if you don't lower your car you will not rub the wheels and tires I'm running with are 20x11 all around with 305/35/20 all around

[@Ubaldo559er]

​@@PHARRAWAY thank you bro.

[@funtfeind4766]

Should I be concerned about potential issues with a wrap and ceramic coating?

[@PHARRAWAY]

not at all

[@Gzus.mobbin]

PPG envirobase (water borne) has a few good matching variants for smoke show. Can’t remember exactly what chip but one of them is a perfect match. You should try out next time 👍

[@DaBoss86]

Nice review!! Been thinking about this setup!! Question what size tires so you have, and does it scrap, especially in the front?

[@PHARRAWAY]

Right now I have 305 35 20 all around with 20x11 all around with no issues

[@swooftee4185]

Are those the widebody wheels or are they regular wheels with spacers? I ordered the same kit but don’t have widebody wheels. Trying to figure out what my next step is!

[@PHARRAWAY]

There 20x10 front and 20x11 rear not oem

[@nakimmuhammad8842]

Great job !!!!

[@TictacAddict1]

Hi, Have watched many of your videos. My favorite is your Candy Red Motorcycle paint video. I've finally got my motorcycle, a 2022 Royal Enfield Himalayan (Rock Red). I want to airbrush verbage, over the current paint, "Jugar Es Lo Mio". Do you have a video where you airbrush lettering or can you recommend someone's channel, that I can learn how from? Thanks in advance!

[@PRamirez600]

Great video, Did you have to add wheel spacers to you wheels? if so what size spacers did you use?

[@PHARRAWAY]

Yes 15mm

[@FraudScenery]

what tire size are you running for the front and rear

[@PHARRAWAY]

Right now I have 305 35 20 all around with 20x11 all around with no issues

[@FraudScenery]

@@PHARRAWAY are you using any wheel spacers, to make the tire stick out more? and are you having rubber issues with the fender

[@PHARRAWAY]

yes 10mm all around

[@sixty9chillininyourhallway141]

Where do u get the destroyer grey paint from?

[@PHARRAWAY]

This color is called smoke show gray and I got it made at HiQ paint

[@stevenbrowne3531]

You haven’t had any problems with the flares ripping off? From tires hitting them brotha?

[@PHARRAWAY]

not at all

[@VinylDrip]

What wheel size and tires you have on here looks amazing

[@cassidygray9719]

does it hold well enough though is my only problem

[@PHARRAWAY]

It holds very well I have had mine for months and had no issue

[@fguz559]

So you don’t gotta drill holes in your charger ?

[@PHARRAWAY]

No not st all

[@Luis-jk6gz]

Hello guys i have some hellcat wheels 20x9.5 what size of spacers what I need? Thx in advance.

[@PHARRAWAY]

10mm

[@Luis-jk6gz]

Do you have a link for them?

[@PHARRAWAY]

www.bonoss.com/home

[@southerncaliforniafreedom7927]

Yo bro it looks very nice I have a Scat Pack 392 charger it's white do I have to get the whole wide body kit or just the four wheels wide body because the whole wide body kit it comes also in the back too and both sides of the car

[@TheFpsunited]

Hey man, just wonder. But why did you need another bumper?? Doesn't it just work with the factory bumper? I'm wanting to do this to mine as well, really appreciate your effort in this.

[@PHARRAWAY]

I had an car accident with the oem bumper

[@TheWellnessWarriorsHub]

Great video! Can i do this same process for my 2014 charger R/T?

[@FraudScenery]

can you use bolts or screws instead of 3m tape to apply the fenders?

[@alexg7502]

That’s a different widebody kit

[@biggadread8286]

Very nice man, looks amazing! Do you mind me asking what are the specs on your wheels and tire di u do any cutting if not any rubbing?

[@PHARRAWAY]

Thanks, sure it's 20x11 rear with 305 35 20 and 20x10 front with 275 40 20 and you will only need to cut fenders if you lower your ride

[@ahmadclofer8493]

This is stock suspension?

[@daltonyork9218]

So did you just get the fenders only ?

[@PHARRAWAY]

Yes

[@rodolfobaeza9585]

Did you use spacers

[@PHARRAWAY]

Yes

[@CIE504]

Looks Amazing!!!

[@MikulakR]

What tire size are you running? Or are you using spacers?

[@PHARRAWAY]

I'm running 20x10 with 274 40 20 front and 20x11 with 305 35 20 rear

[@Mustafadroid]

I have a question brother you think I can still do it in 30° weather

[@PHARRAWAY]

Yes as long as it's dry not raining you will be ok

[@babydriver8844]

You did great only thing I disagree with is 3m taping the brackets to the car I feel drilling them would be better so when I do mine definitely drilling the brackets on

[@samfisher4204]

so why are some people cutting the fenders and you are not? it was my understanding that you had to.

[@PHARRAWAY]

I made a video explaining

[@TheDistrict202]

Size tires are you running ?

[@PHARRAWAY]

245/40 20 front and 315/35/20 back

[@SuburbanBBQ]

I love the wide body kit! It was well worth the effort. I just noticed you were in TX. What part? I'm in Houston.

[@PHARRAWAY]

You can email me at [e-mail]

[@rtgang9810]

Yo bro I was wonder how could I get my car done by you I don’t how to get in contact with you

[@PHARRAWAY]

@@rtgang9810 [e-mail]

[@kidmaxima4life]

Awesome mod! It looks great 👍

[@PHARRAWAY]

Thanks Atkinson

[@vic_cc244]

How long did the painting take

[@PHARRAWAY]

about 3 to 4hr

[@GPCustoms]

Great video 🎉

[@ParkPlaceRB5]

Yo man, I noticed you’re in Texas. Don’t have a shop? Could I pay you for this service on mine?

[@ParkPlaceRB5]

@pharraway is that a yes or no? lol

[@Keeonnnnn]

What about the bottom

[@billymcdonald4934]

Perfect 😊 you need a camera man... so you can concentrate on your great video's 😊

[@davegunner2717]

Awesome 👌

[@taj4prez]

Where can I order the tools

[@PHARRAWAY]

www.amazon.com/dp/B07S2GF8GW?psc=1&ref=ppx_yo2ov_dt_b_product_details www.amazon.com/dp/B07M5RDQMR?psc=1&ref=ppx_yo2ov_dt_b_product_details www.vicrez.com/automotive-tape-adhesives/3m-vhb-5952-double-sided-tape-black-15ft-vzn118238?tracking=top-home-tiles

[@taj4prez]

Do you think I will need spacers for 305/35ZR20 all the way around?

[@taj4prez]

@@PHARRAWAY ?

[@PHARRAWAY]

@@taj4prez what size of wheels do you have

[@taj4prez]

@@PHARRAWAY 20*11

[@SHWARTZ4200]

Do u live in Pharr Texas lmao

[@alyssamoreno4227]

How’s it holding up I’m about to do mine 😳

[@bigsquatchsasfoot1964]

I kinda like it both ways but it does look meaner with the wide body . That’s certainly a cool ride my friend nice job 👍

[@cristoferpaniaguapaniagua9758]

To where do you buy the kit?

[@PHARRAWAY]

Vicrez.com

[@SRT_Jadi]

How much would charger me for this for my charger sir

[@PHARRAWAY]

you can email me at [e-mail]

[@biggadread8286]

What are the offsets on your wheels?

[@PHARRAWAY]

Offset 20

[@quintinjohnson191]

Where are you located

[@PHARRAWAY]

Texas

[@jameschilemi4690]

Should of spent the extra 700 and did the whole kit. The factory widebody doesn’t have those bumpers.

[@PHARRAWAY]

I just did look at my new conversation

[@CIE504]

There is hope for me!

[@wcsoblake85]

Hey bud, what was the total cost?

[@PHARRAWAY]

You can email me at [e-mail]

[@savagebeast4726]

Both ways is sick but widebody is better

[@bobbyanderson1828]

How did you get the wheels to come out?

[@PHARRAWAY]

10mm wheel spacers

[@dayslife]

nice! now you need to paint those wheels silver ...😁

[@PHARRAWAY]

true

[@6.8mpg]

Damn ur good bro

[@2amtrimm]

Do you do customer installs , i have the had kit for months just no one to install . Amazing video btw 🔥

[@PHARRAWAY]

Yes we do you can email me at [e-mail]

[@andrewcruz1931]

RGV 956!!

[@PHARRAWAY]

yes

[@dagkrimeyloc8441]

I need this on my car, how much you charge?

[@PHARRAWAY]

You can email me at [e-mail]

[@Lilparis8]

Can you do mines instead 😂

[@PHARRAWAY]

Anytime

[@Otwmar3]

How to install in about 3-5 business days 😂😂

[@SurvivalGod-101]

🤦🏽‍♂️

[@loothuali7701]

Now lower your cars gc

[@Thug9030]

Horrible 🥃

[@jeramiahweston8095]

Wide for sure! Love the brass wheels on that color! 👍

[@phantomsage4827]

Okay but where’d you get them beast ass rims? 🫣😍

[@PHARRAWAY]

www.fitmentindustries.com/?gclid=Cj0KCQjwk7ugBhDIARIsAGuvgPZh7vAt5Jpa1r8KcqvwP--mwReyE0CAu2SPp-iqgzKtuXVJzxZhLlYaAuN3EALw_wcB

[@thatguy5970]

BUT WHAT SIZE ARE YOUR TIRES.....ALL THE WAY AROUND.....🤔🤔🤔🤔....WHATS YOUR TIRE SIZE...???

[@PHARRAWAY]

Rear are 315/35/20 front 275/40/20

[@thatguy5970]

@@PHARRAWAY THANK YOU FOR RESPONDING....LAST QUESTION....DID THE WIDEBODY KIT HOLD UP...???..IS THERE ANY RUBBING FROM YOUR TIRES AT ALL....??

[@PHARRAWAY]

@@thatguy5970 it's all good no rubbing but because I have a stock suspension if you lower the car you will need to cut fenders

[@thatguy5970]

@@PHARRAWAY THANK YOU FOR THE ADVICE BUDDY

[@Hitch_49]

You need some lowering springs man