Victory Vision Upgrades

  Рет қаралды 11,674

Brian Sanders

Brian Sanders

Күн бұрын

This is my 2011 victory vision. I added a trunk upgrade, some new chrome , and an exhaust modification.

Пікірлер: 16
@rousesimpson3546
@rousesimpson3546 4 жыл бұрын
Holy moly that’s awesome 👏
@andressosa898
@andressosa898 5 жыл бұрын
Sounds awesome! Good job!
@servicarrider
@servicarrider 6 жыл бұрын
Looks good. Sounds good. Even if your lacking the ability to weld I can't imagine a muffler shop would charge much just to weld two pieces of tailpipe back together.
@2704music
@2704music 6 жыл бұрын
Check out what it looks like now! kzbin.info/www/bejne/nYe3qnl6nNyEhKM
@mpcinlv
@mpcinlv 2 жыл бұрын
Soumds ..... looks beautiful.
@josephwhite8578
@josephwhite8578 3 жыл бұрын
Hey! Saw you on Derek Turners channel. How do I get some speaker pods for my gl1500? I’d like to buy those
@2704music
@2704music 3 жыл бұрын
I can make them for you. Call/text me 412-877-6624
@markfarmer1
@markfarmer1 2 жыл бұрын
I have the same bike, where did you get the chrome pieces that mount under the jugs?
@2704music
@2704music 2 жыл бұрын
I got them from eBay.
@markfarmer1
@markfarmer1 2 жыл бұрын
@@2704music what do you call them?
@gatecitydj
@gatecitydj 6 жыл бұрын
Can you add some comments or instructions on what you did to your pipes?
@2704music
@2704music 6 жыл бұрын
Yes. It's a bit of work, but it's fairly easy. I removed the heat shields and the mufflers on each side. I cut each muffler in half with an air powered cutting tool. (An electric one will work just as well) Once they are cut in half, pull them apart and you will see the baffles. work the baffles out of the muffler and then weld the muffler back together. Be sure to weld them so that the mounting screws are in the same position as they were before you removed them. put the mufflers and the heat shields back on the bike and enjoy!
@xander11167
@xander11167 6 жыл бұрын
i wish you made a video on the removal of the baffles. great job.
@2704music
@2704music 6 жыл бұрын
Thanks. I didn't make a video of the process because it would've been too hard to work and hold my phone at the same time. LOL. The process was easy though. What I did was remove the mufflers, cut them in half, pulled the baffles out, and welded them back together.
@bradleyjaywallace8211
@bradleyjaywallace8211 5 жыл бұрын
where can one get the little rubber looking "mats" on the fairing just forward of the floorboard (@ 1:41 of the video) ??
@2704music
@2704music 5 жыл бұрын
I found them on ebay
Why you Should NEVER Buy an Orange County Chopper
22:23
Bikes and Beards
Рет қаралды 8 МЛН
Shovelhead the best sounding HARLEY? Engine Sound Compilation
16:04
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
I Painted the Victory Vision White!
5:39
Brian Sanders
Рет қаралды 4,5 М.
Victory Vision Starting Issue Solved!! Torque Limit Clutch!
4:52
Brian Sanders
Рет қаралды 1,5 М.
What Will It Take To Buy The RAREST Motorcycle I've Ever Found?
24:06
Wheels Through Time
Рет қаралды 587 М.
I Spent 100 Hours Inside The Pyramids!
21:43
MrBeast
Рет қаралды 50 МЛН
Twin Turbo Mad Max Style Virago 920 Bobber - FULL BUILD
37:01
DoctorMotorcycle
Рет қаралды 2,6 МЛН
I shouldn't have STOPPED | S8, EP35
23:12
Itchy Boots
Рет қаралды 245 М.
ВАЗ против Лексуса
0:10
AVTO-MOTO I FREE TIME
Рет қаралды 80 М.
Что делают родители по ночам?
0:17
maroshanutty_official
Рет қаралды 276 М.
OMG Awesome Shooting Fish ,techniques Fishing 🐟 #Shorts
0:58
Sophai Fishing
Рет қаралды 2,9 МЛН
Беларусы с привилегиями в Москве
0:12
Simon Car Shop
Рет қаралды 107 М.
Ремонт BMW 535i GT молотком и зубилом!
52:57
ИЛЬДАР АВТО-ПОДБОР
Рет қаралды 2,5 МЛН