VIDEO 3 - 22 LR RELOADER

Brian Nixon shows you how to use the 22 LR reloader.
Find all of these products here: 22lrreloader.com/
VIDEO 1 - PRIME ALL REPRIMING COMPOUND:
• VIDEO 1 - PRIME ALL RE...
VIDEO 2 - #11 PERCUSSION CAPPER: • VIDEO 2 - #11 PERCUSSI...
VIDEO 3 - 22 LR RELOADER: • VIDEO 3 - 22 LR RELOADER
VIDEO 4 - 22 LR MAG RELOADER: • VIDEO 4 - 22 LR MAG RE...
VIDEO 5 - 22 MAG 22 LR RESIZING DIE: • VIDEO 5 - 22 MAG 22 LR...
VIDEO 6 - MILITARY CASE RELOADER: • VIDEO 6 - MILITARY CAS...

[@long-dongvonbraun501]

Post election 2020. .22LR ammo prices brings you here

[@MorrisOutdoors98]

Ammo availability

[@phillip9451]

ALMOST every election

[@w.e.s.]

@Colin Yousef wtf r yall babbling on about

[@noahway13]

Wait it out. It will cycle thru.

[@hokanut]

The large scoop gives one grain of W231 exactly and two small scoops gives 1.5 grains...just in case anyone was wondering. Measured on a Dillan beam scale.

[@mbuggin1976]

Excellent product! Couldn’t be happier! Thanks Brian! Remember to smoke the mold a lot. It helps with casting lines and of course release. I was staying patient as Brian told me they are swamped having it two weeks later and I’m a happy customer! Thanks again! Edit: I’ve found that CCI, Remington, Winchester, New Norma and some shorts I reloaded work with no resizing needed. I only have issues with Federal casings. Side note, I use the 25 grain for 3 things. They work as a “stinger” type round a 22 short and I also have great performance from them in a break barrel 22 springer.

[@shedevil595]

I recently placed an order for the PrimeAll and it took a little while for shipping but I got exactly what I ordered and am very pleased. Thank you!

[@ericlondon5731]

In s.e. Georgia the humidity is high, almost year-round. For other situations, I have left items that need to dry in a closed plastic container that had a dehumidifier. These are chemical traps that you can get from the dollar store and remove moisture from the air once activated. I've got a big one in my gun safe.

[@Maloney001]

Canada here, just ordered this and will use it. thankyou

[@martinkennedy603]

Just ordered yesterday. Did you receive yours yet?

[@russelsellick316]

In the early 1960s in South Africa 22 ammo was not available and they reloaded old cases...in a very similar manner.

[@missingthe80s58]

Be a lot faster if the compound were a thin paste dropped in the base and the casing spun to 10,000 rpm for a split second in a 1/4" rotary tool. You'd want to use a keyless chuck adapter that can take the .22 case. It would make quick and very uniform work of using centrifugal force to sling the compound into the rim where it belongs. Hint: Factories do this.

[@bilbo_gamers6417]

Yes. It would be a lot faster. However this is actually surprisingly reliable. I have done this several times doing my own research testing 22 repriming, and you can pack match head powder into a case rim by hand and it'll work 100% of the time. If you have a lathe or a pneumatic rotary tool, then this is probably better, but for those who don't, this manual method certainly works.

[@bilbo_gamers6417]

Why has nobody thought of making a serioud version of this for 22 magnum? It's mostly a novelty to reload 22 long rifle, but reloading 22 magnum can genuinely be kind of useful, because 22 magnum can be a fairly potent round, and someone might genuinely be interested in experimenting with it.

[@chriswoods3188]

They do sell a kit for 22mag.

[@bryantbutlermf]

They do I’m pretty sure it’s all the same

[@suulguul2734]

Would love to see a tool that does 5 at a time

[@travisj.1938]

This is exactly what they should put out next!

[@gizzyguzzi]

Absolutely! And all in 40gr!

[@davidlee50]

I want to see you do a bullet pour for the bullet mold.

[@jeffhuntley2921]

Load data for unique! Thats my favorite powder

[@011CJ]

The lee 22lr allso dose not fix the dent in the back but Thay will cost a lot more to buy their dies and bullet mold and all the stuff needed for their system so I think this is the best way to reload your 22lr on a budget

[@DickTickles]

A 6 or 8 cavity mold in a few different bullet weights would be greatly appreciated, lol. I'm thinking 50 grain for the .22 Mag would be sweet. Also, do you recommend powder coating as I don't see any lube grooves on the bullets.

[@electromech7335]

I was thinking about doing the 45/45/10 tumble lube for 22 wmr.

[@BlaineNay]

Is the priming compound non-corrosive?

[@rickomatic2012]

Sure would love one for 22 shorts. I'm thinking the crimping ring and rim placement wouldn't allow for it.

[@garygirdner7634]

thanks guys

[@bretthadley2043]

So rad... Except time is money... I'll just buy 22 ammo

[@kenibnanak5554]

Please make a heeled bullet mold and crimping die for .32 rimfire.

[@TheWheels1965]

Hi guys, great video. Can I use your re-sizing die and modify the case re-sizer to work like a WaltZ .22 re-sizing die would, I just need to change the shape the end of the round to a hollow point or a Eley style tip. cheers

[@wybeellc]

Could you use this mold to make rounds for the naa cap and ball revolver?

[@reefgratos2035]

Where in canada can we buy the kits?

[@Whistler84]

Question 1: Have you tried powder coating the bullets? For velocities and twists where you normally use copper plated .22 LR that would be the boss, but I'd think the heel of the bullet would need to be smaller since you can't size that? Question 2: What does the priming compound consist of? I imagine you won't ship the compound internationally, so I'd have to be able to source it locally since I'm in Scandinavia.

[@zahidhussain-ei8xn]

Mix fine match head powder with the red striking strip of the match box Scrape the red powder with a sharp blade test the mixture before repriming.

[@AZ762SHOOTER]

You would have to send the bullet through a resizer after powder coating. It is a good idea tho. I would. Maybe lee would make a custom sizer.

[@bigrocc3925]

I am planning on buying this very soon, was wondering if the crimp/mold combo would work with 22 magnum.

[@AZ762SHOOTER]

What I want to know is how you take the crimp out of the shell. I went to load some and couldn't get projectile in most of the time.

[@sharpshooter7916]

If your having that problem use a reloading reamer

[@guyellis4764]

Took small pointed punch with angled shoulder. Gave the case mouth a tap with a small brass hammer. Flairs neck a tiny bit, also round out case mouth that are out of round. Bullet go in every time. Crimping tool takes the flair out.

[@user-qi7vw5xc3z]

Where in Australia can i buy the kit

[@humphrey212]

How many reloads can you get out of a 22 LR brass shell?

[@jessikamat1]

What do you do about lead fouling?

[@dondon332]

Hey Brian, ordered a reloaded and 2 prime all kits but only got one. Sent multiple emails and called but no response.

[@troybelanger974]

When making a 25 grain bullet, what is the bullet length?

[@MrMrphil100]

I would buy one if there were two 38 grain bullet mold spots.

[@kennylattin9034]

Do you have plans to produce a musket cap former?

[@tankerforlife4978]

Anyone know if i can use this kit for the 1910 - 22 Remington Autoloader Model 16 shells? I have the shells...

[@marine6981]

@sharpshooter are you still in business? I orders a kit a few days ago and haven't heard anything. Yes I have checked my spam folder.

[@sharpshooter7916]

Yes we are we’re just 3-4 weeks backlogged

[@davef5208]

Well my 1st try was a dud. Used the Prime All, did the exact scoops, used aceatone Went by all the instructions, no short cuts, or substitutes. Packed the rim, even let it dry for a few days. Then added shotshell powder, and crimped projectile. Stuck it in my S&W 9 shot revolver (which has a hard hitting hammer), and "click". No Bang! waited about a minute, spun the bullet (to try hitting another spot on the rim), still nothing. Spun it again, still nothing. Idk, maybe I did something wrong. I'll try another one later. Next time I'll try just priming the rim, and fire the empty shell to see if it works.

[@CanabalasianFury]

Issue may be the type of powder you used. Not all powder burns at the same rate…

[@davef5208]

@@CanabalasianFury i didn't load the shell. Just test fired the primers in an empty casing. The prime all primers hardly make a snap sound. Factory primers sound like fire crackers going off. All the primers made from prime all either do nothing or they just make a weak pop.

[@bilbo_gamers6417]

Honestly, it might now have been you or the powder. Reloading 22 can be a huge pain and unreliable. One thing I might recommend however is that you mix some nail varnish in with the powder to cement it. It might be that the powder fell out of the rim because it wasn't affixed in.

[@Nhungdauchan]

Mua về được về Việt Nam thì hay

[@giobentre9889]

Hello

[@vanzangiancarlo8281]

Chiedo se possibile avere la pinza fondi palla?

[@KalashnikIlya]

Я занимаюсь релоадингом 12к. С калибром 22lr ещё не работал. Заинтересовал Ваш набор. Идея интересная. Есть вопрос: "Сколько раз можно переснаряжать одну и туже гильзу?"

[@user-nc6js6od7p]

Здравствуйте, вы разобрались с релоадом 22 LR ?????

[@KalashnikIlya]

@@user-nc6js6od7p да. Спасибо.

[@user-nc6js6od7p]

@@KalashnikIlya есть видео о том как снаряжаете патроны на мелкашку ????

[@KalashnikIlya]

@@user-nc6js6od7p да времени займет многовато. Но если ты увлечен, то только в кайф.

[@KalashnikIlya]

@@user-nc6js6od7p И я очень вам советую удалить свой комметрарий и на время избавиться от мелкашки. Зря вы про разрешение написали. Теперь в России 95% случаев к вам с обыском прийдут в течение до полугода. Нельзя такое в интернете писать.

[@andrewsupertramp124]

Hi just ordered the kit.. Can I use lead fishing sinkers (splitshot type stuff) to cast bullets?

[@CamoCollie]

I know barely anything about fishing, but as long as the sinker is 100% lead and you know how to get all the impurities out I see no reason why you couldn't

[@thewatcher611]

Zinc is your enemy, other than that, it's finding a temp that works for your mold. If your lead is castable, it will not be hard enough to hurt your barrel. I've see sinkers loaded into 12 gauge as buckshot, so yeah, it works, it's lead. PPL cast sinkers with the same ingot that will cast a bullet.

[@gunnyd9282]

YES you can. I buy the big egg sinkers and wheel weights all the time.

[@outdoorsythings2573]

Yes I use fishing weights, to cast, for a 45-70.

[@johnstewart8849]

Ok...I bought a kit, but none of the powders on your chart is available...out of stock. I have 4lbs of LilGun....is there a loading recommendation that could use that? I found some Pyrodex P available at 5/12 on Hodgdon’s web site.

[@noahway13]

That works

[@alfa-jz5ue]

How much of the Blc-2 would I use.

[@phillip9451]

does the caster work with copper?

[@martinkennedy603]

Considering copper melts at roughly 800* f higher than Al you can bet the mold will melt or deform as aluminum melts at a much lower temperature.

[@zqx357]

The wax slug would really dirty your barrel!!!

[@m1cajah]

How can I use this to reload 209 primers?

[@musicaldynasty9750]

Hola lo quiero comprar se puede enviar a venezuela

[@garyfoltzer5734]

Can you order by phone?...phone#?....dept.? Etc

[@kennethdobesh4577]

Any chance .22 shorts can be done with this? Or do you make one for .22 shorts?

[@noahway13]

No difference.

[@Garysalunatic]

@@noahway13 the crimping step wouldn’t work but the priming is the same. I got the 22mag setup also, mainly for the bullet mold seeing as it’s got 2 same cavities. They aren’t the same as the 22lr cavities but the crimp cavity is the same in both molds. I imagine you’d have to place the 22mag shell in at the correct depth by eye instead of simply placing up to the rim like you do with the LR setup. I’ll try it when I get some empty 22mag brass. I just finished priming a few LR shells and made a few #11 snap caps with primer. Gotta mold some bullets and I’ll do a test but I’m not going to shoot off mag rounds just to test that kit

[@tsmith7070]

2021... primers only available at auction sites for 300 buy now price. The Potato really is driving ammo and gun sales.

[@user-nc6js6od7p]

Сколько будет стоить доставка в Россию??????

[@tboman4128]

How many people will actually reload 22lr more than once? It's too and unreliable.

[@bgilmore3]

This kit does not include a resizing die but you sell a resizing die separately, thus is seems like resizing is deemed optional. What are the advantages purchasing and using the resizing die on my press if it is optional?

[@bgilmore3]

lol nevermind! You answered my question in the video about the die. (if using brass not fired from your own gun, resize, right?)

[@sharpshooter7916]

bgilmore3 the kit is set up like the old lee loaders so if u are shooting the case out of the same gun or u check the cases before u load them your good to go if u don't want to do that the re sizing is the perfect option

[@leepalmer1210]

I had no idea this existed but bey your sweet bippy im ordering

[@user-ib4py1xm3u]

Ordered this product a week ago they took the money out of the account never received the product they don't answer their email and the telephone number for Brian goes to the voice mailbox which is full got my money but I can't get my product

[@TheWCPGW]

Any update on this? I've recently hopped in the same boat.

[@jackass1644]

@sharpshooter dose it work with 22mag ?

[@sharpshooter7916]

We have a 22 mag kit thanks Brian

[@teecarter4900]

Yup. Its this bad out here.

[@jakejones5736]

Only $10 a brick and 26.5 hours labor....

[@gizzyguzzi]

If I could eat brass, lead and matches and poop out loaded ammo I would. but I can't.

[@johnduch2815]

Not a precision mold. cast halfs not machined. sloppy, tuns of flash on bullets. over priced for what you get.

[@independentthinker8930]

I can't get the prime all to ignite

[@independentthinker8930]

@John Beige duh. I can tell without that, geezer, far from newbie here

[@travisj.1938]

@@independentthinker8930 may be tge humidity do you live in a humid area?

[@independentthinker8930]

@@travisj.1938 it is in summer. I got a pm that gave suggestion to try

[@independentthinker8930]

@@travisj.1938 if it's so sensitive it's useless to me. Stick with roll caps

[@travisj.1938]

@@independentthinker8930 that really stinks your not having any luck with it. I do not have one I was interested in getting one but am having second thoughts now. I am unfamiliar with roll caps I will look them up 👍

[@midlifecrisis7888]

Why ?

[@reillyc7605]

I dont know seymore

[@slayer324]

Shtf !!!! If you need more during that time then you can make your own

[@cdevidal]

Is your email and phone working? I’ve been writing and calling…