Рет қаралды 1,531
This video employs a BFP405 transistor model which was readily available in AWR v11. If you can't find this model in newer versions, please download this simulation file which includes the BFP405 model explorerf.com/BFP405_from_AWR_...
Content:
Simultaneous Conjugate Match Part 1.
Achieving maximum small-signal gain using GM1 and GM2. Design of distributed matching networks.
Version 13 update: In version 13, “To” and “From” ports must now be specified for a number of two-port measurements. This was not required for version 12 or earlier.
The measurement “GM1()” shown in the video has now been replaced by GM1(2,1) in version 13. That is "To port"=2, "From port"=1.
“GM2()” has also been replaced by GM2(2,1).
The measurement “MU1()” shown in the video has now been replaced by MU1(2,1) in version 13. "MU2()" has also been replaced by MU2(2,1).
You may download the "Conquer Radio Frequency" e-book, which provides support material for these videos, at explorerf.ipage.com/conquer_ra...
Introduction (0:00)
Input Match (9:25)
Output Match (16:17)
Deploying both matching networks simulataneously (22:00)
S-parameters after Sim Conj Match (23:50)