Video instruction TSPROF K03

Video instruction for TSPROF K03. You can make an order on the shop.tsprof.com/?...
Also, you may place an order via this phone number: [phone]
or write us here: [e-mail].
You also can get in touch with our dealer in USA: www.statesllc.com/
Buy a professional sharpener tool with rotation mechanism: tsprof.com
Subscribe us: kzbin.info?sub_...
Welcome to our Instagram: / tsprof_en
Also put a like for tsprof facebook page: / techstudioprofile
Best regards,

[@frankadams7238]

I wish all of the u-tubers learn from this video/as how to make an professional video.This man gets to the point and has no bullshit.

[@adamdiaz8442]

Well said

[@FORDRANGERFAN]

I just got mine delivered today !! Love it, And enjoyed the video. Thanks

[@adamdiaz8442]

Recived mine today love it amazing bit of kit

[@ryanwallace4204]

My K03 Pro didn't come with a manual, the wooden crate didn't have any paper, other than the certificate. But with all of the videos provided, i'm slowly creating one of my own. :)

[@TSPROFSharpening]

Oh wow! How strange... If you need someting, let us know.

[@Platoface]

I’d buy one if I could afford one. Looks like the best system out there.

[@dr.dickie1418]

It is excellent. I got one a few years ago, they have done so many updates, I can hardly keep up. it is an amazing system.

[@rix3333]

Very usefull, thank you!

[@yugbe]

Every Moment I can Taste my knives getting sharper! TSPROF K3 comes on the 6th!!

[@ShelleyRaskin]

I have to say your equipment looks stunning! I sharpen professionally and use a wicked edge for knives, a tormek for scissors, chisels and axes and stones for machetes and scandi edges. I would love to try your system though, if ever you decided to travel to New Zealand please bring one with you as I would love to try it out; in fact there is a Blade show here mid October, you could bring one over, bound to generate quite a few sales!

[@uriellevi9000]

instablaster...

[@spielbergolf]

Hola, cuando se vende la nueva serie. Gracias

[@Ducati_Dude]

Vlad... why two different hex wrench sizes for the clamp screws?

[@npaisnel]

I did wonder that too. Would be quicker to tighten if the same size

[@adamdiaz8442]

To be fair the thicker screw will offer more pressure especially if it’s a jack screw

[@npaisnel]

Yes, so they could have just made all three the bigger size.... unless there is a space limit. Mine is due for delivery tomorrow... will find out soon.

[@user-cx3dn1to4m]

มันเป็นเครื่องมือที่เยี่ยมยอดมากๆ แต่ไม่รู้จะหาซื้อได้ที่ใหนครับ.

[@1966cambo]

Man I wish I could afford one of these!

[@patgraves7able]

I need to adjust the clamping frame and when I loosen the screw the frame will not move.

[@davidstepeck2644]

Vlad, HELP! I just received my K03 and need your help. I cannot raise the angle higher than 22°. The rack and pinion can't raise any higher since the adjustment tower cannot go any higher, it bottoms out. The manual gauge goes to 40°, not that I need that, but I need more than 22°. Any ideas?

[@Ducati_Dude]

23° max...

[@davidstepeck2644]

You have to buy an extender for $110 plus $45 shipping. This is not right to advertise it “sharpens all types of knives and tools” then are forced to pay an additional $155 to make it sharpen properly.

[@Ducati_Dude]

@@davidstepeck2644 ---> No... doesn't seem right... the Website does state 23° max though. However a tad misleading, as the angle guage shows 40°. 🤷‍♂️🤷‍♂️🤷‍♂️

[@Ducati_Dude]

@@davidstepeck2644 ---> Which kit did you buy?

[@davidstepeck2644]

Ducati Dude I have the K03 Outdoorsman. How can it be an “Outdoorsman” when it can’t sharpen pocket and hunting knives at 22.5 to 25 degrees. The steepest angle I can get is 22 but the website says 23

[@kenturner3268]

I received mine on 08/30/22 and can't say it was so smooth of an assembly. The box had been dropped on the corner and the wooden crate was busted. The logistics company that TSPROF.US used to fulfill the order put the tsprof box inside of a larger box with virtually no packing and when I received it from UPS the shipping tape was busted on both ends . Long story short the mechanical angle gauge was bent pretty bad which I blame on the shipper but the fact that the thumb screws that hold the unit to the weighted base would only thread in by hand about one third of the way and had to be tightened the rest of the way with pliers leaves me to wonder just what kind of quality control issues the company has. I am not happy with my purchase.

[@TSPROFSharpening]

Please send us a message to [e-mail] with photos and we will assist you on this matter.

[@kenturner3268]

I am happy to report that a new K03 was delivered on 09/06/22 and is in perfect working order. Hats off to Arnold from TSPOF.us and Victor Dyachkov overseas for all of the help.

I just received my K03 today and boy was I excited...until I tried to get a 22.5 degree angle. The lift movement won't go higher than 20.1 degrees. I'm sure it's something obvious that I missed during assembly. Can you please tell me how to remedy this issue.

[@davidstepeck2644]

Thank goodness I found your comment as I thought I was doing something wrong. This sucks if you can't sharpen steeper than 22°. I sent this to Vlad on his video and email: Vlad, HELP! I just received my K03 and need your help. I cannot raise the angle higher than 22°. The rack and pinion can't raise any higher since the adjustment tower cannot go any higher, it bottoms out. The manual gauge goes to 40°, not that I need that, but I need more than 22°. Any ideas?

[@davidstepeck2644]

Spongeworthy, I loosened all the screws I could, to see if I could get it to go higher. I bet they messed up and didn't realize this flaw. Will probably send us a shorter clamp or new rack and pinion assembly. Let me know if you get an answer, please!

[@matthewcostelow2767]

David Stepeck I just ordered a k03 and should be coming in a few days. Did you ever find out how to fix this?

[@johnbailley4468]

@@matthewcostelow2767 there is no fix. max angle 23 degrees. the only fix and I did it was to buy the table. got it at www.statesllc.com/products/small-universal-table-out-stock-more-expected-5-may it will go to 90 degrees and cheaper than the extender plus you can do so much more with it. hope this helps

[@Ducati_Dude]

0:12 Bwaahahahaha... Priceless... 😆

[@FORDRANGERFAN]

That's my favorite part ha ha ha. It's like he knows me.

[@2sd178]

At the 7:48 mark, I see metal shavings coming from the hole on the long screw, that's not good! Threads won't last long......

[@ACitizenOfOurWorld]

Good Catch. Probably due to the fact that the purpose of the screw is to angle the two clamp pieces and of course that's going to result in some cross threading. Might be why they discontinued supplying the current K03s with that style of clamp and went with all milled aluminum instead.

[@cfishel15]

Hi Vladimir, I have a question: I bought a K02 sharpener from TSProf in 2017. I would like to upgrade my system to K03. Will my K02 clamps fit into the K03? Thank you!

[@TSPROFSharpening]

Hey there! I should first see the photo of your clamps and clamping frame. You can send it to [e-mail]

[@marquis2831]

Thank you. A picture is worth a thousand words, so is a video worth a google words? I'm sure Google would like to think so.

[@markbrooks4252]

I can't get Mine past 21 Degrees , I would like to get it at 23 Degrees , Why can't I ???

[@pierrelugol650]

Ñ