Pop-A-Shot Assembly Video (Home Dual Shot)

[@Bcharns]

This was a great video! I just set up the dual pop a shot for my grandkids and watching this video was a big help! It was spot on. Thanks so much for posting.

[@timbrandt]

Thank You! So glad that I found this. No Way I would have finished it without it!

[@TheShawnclark8]

The directions saying to use #26 bolts doesn’t make sense as the #26 is too short. Anyone else have this problem?

[@beastking2157]

Yeah same

[@Bmr4life]

Thanks for this. There are a lot of details missing from the printing manual which leads to having to remove parts once you get a couple steps further due to there being a 50/50 chance of installing something backwards without knowing it.

[@lindajordan3630]

Great video!!!! 😊 Thanks

[@iced_out818]

Do I need to tight the screws on the first one? Mine won’t tighhten

[@mannyg7627]

I’m having the same issue

[@gwentagart2552]

I am also having this issue. You need to be more clear in the video

[@iced_out818]

@@gwentagart2552 I did mine a long time ago, but if I remember, you need to tighten them, it took me a little bit but I ended up getting my dad too help

[@kushbd]

They don’t tighten. I am confused.

[@Jasonchaaang]

@@kushbd i'm runing into same issue. Did you figure it out? How do I tighten?

[@jamesbrownjr4756]

Just bought the dual home pop a shot. The sensor wasn't working on the left side. So I swapped the connections for the top and bottom sensors and now all is well😜

[@icemandell23]

Unfortunately this video is already out of date. It’s not even close to the directions I have

[@sheriffquick]

Are you happy with this product, do you think it worth 1000.00?

[@jackepp]

this is soooooo fun, me and my brother use it everyday

[@chrissygotthetouchdown6579]

I plugged in everything for the electric thing but even if I put batteries it won’t turn on

[@2Raw_51]

Do a assembly tutorial on the pop a shot dual shot sport next.

[@mirandaanncastro2922]

Faze rug probably watching this video after he got his pop a shot for Christmas 😄

[@francescawarner69]

Miranda Ann Castro I WAS JUST THINKING THAT😂😂

[@sethtolentino3335]

this is why im getting a pop a shot because of him and his brother

[@asefakebede9258]

lol

[@eweze2001]

Christmas Eve project, fairly handy, how long does this take to put together?

[@joyfaith1711]

About 30 minutes

[@2Raw_51]

How do you do the net for the dual shot sport!!!!🙁

[@kushbd]

The nuts don’t seem to work. How do you tighten these?

[@bigbaldodave88]

The directions in the video are opposite not exactly the same also caught a flaw on figure 4A where it tells you using bolt 26 which does not go all the way through the pipe

[@joshraskoff6302]

What's up with the wire from the control panel? First it's towards the shooter... But next video frame it's sitting in the ball return ramp as if it's been cut from the front of the control panel... How should it get to the right side? On the ball side of the bar or the shooter side of the bar?

[@JB-le8zy]

Step 9 is incorrect. It does not mention/show anything about the “locking mechanisms.”

[@danielb3500]

Yeah this video is a little out of date. I'm putting mine together now and screw numbers from the video don't match the instructions that came with it. Also mine didn't come with the two Orange backings for behind the backboard when attaching the rim. Not sure if they discontinued this piece or if it's not needed anymore. Did anyone else have this issue?

[@MPBADASS90]

I just assembled mine and that orange backing does not come with it it's not on my parts list and I bought this last year. Hope this helps 😳🙂.

[@goldilocksfhh9670]

@@MPBADASS90 that sucks. And I’m about to buy it.

[@MPBADASS90]

@@goldilocksfhh9670 it doesn't affect anything it's just fine. Just don't overtighten it and you'll be fine 😉.

[@goldilocksfhh9670]

@@MPBADASS90 thanks. I’ve assembled & all is fine. Only annoying thing, the net is too loose on the side. So I’ll find a way to tighten it up.

[@iamdeadsilence]

Does anyone know what part of the pop a shot makes the sounds? Is it the scoreboard or the controller?

[@DL101ca]

Scoreboard display has a speaker.

[@odellwood2711]

The paper instructions suck it says nothing about threading fabri thru poles

[@adolfjett882]

Only one side is registering score

[@brada9213]

How do you make the net right with no extensions used? Mine is loose when I adjust the strap to the shortest setting and balls get stuck halfway down.

[@ifollowjesus1667]

Use the sleeve insertion in the blue tarp closest to the basket

[@joeking5186]

I'm having issues with the sensors not working. Balls going thru the basket don't seem to trigger them. The sensors seem to be slightly recessed in the backboard even though they are fully screwed in in the back. Any ideas ?

[@Toshiogo1]

Contact pop-a-shot and get new sensors

[@popwarhomie]

Why am I watching this... I don’t have one of these and don’t plan on ever getting one...🤦‍♂️

[@MatJustChillin]

lol

[@2010Zamir]

BrandonB311 😆

[@shawnjacks2072]

The welds on this is super cheap they always break right away

[@Spqaz]

Thanks

[@MatJustChillin]

MY DOG PEED ON THE LIL BOOK I HATE READING THE YELLOW PAGES #MATJUSTCHILLIN #REACTIONS

[@jayr122001]

he doesn't wanna show how small it is.

[@joyfaith1711]

Arrives soon!

[@007menhorn]

instructions 12 and 15 on the paper form are TERRIBLE!!!!!!!!!!!!! Both need broken out into 2 or 3 more sub instructions.