Vin’s Airbagged Lexus LS430 Gets Even Lower Than Before // 621 Golden Ep 018

[@HooniganProjectGarage]

These episodes were filmed prior to the quarantine while we were stock piling content. Next week all of our builds will transition to our home garages. #stayathome

[@TakuroSpirit77]

I'm watching these from work because I'm Essential. #SaferAtHome

[@steelcityrooferjm]

Vin literally says he was board during quarantine so doused in purell and came to the shop anyway lol

[@troyeiffert338]

Bologna, yo.

[@lucasweigl1961]

Make it look clean could take trailer bearing caps and put snap them in where the holes are might make it look cleaner

[@316dozer]

paint that raw edge at least gorilla tape the hole

[@jnieto490]

Slammed car, track car, drift car and an off road truck 🤯 Vin living the dream 👌

[@rezaesfahani7310]

The carcaine dream

[@vwpassat444]

Vinny's garage is total goals, all his cars run and they're all sick af

[@sansaeteurn5027]

Hert might have something to say bout that

[@gattsudon]

Vin is pretty much carrying the entire staff rn. easily my personal fav carcain addict of the group.

[@meffycodrin1853]

@@gattsudon he does have the best taste out of the homies tbf

[@icanrunat3200mhz]

Was bummed when Kikawa left, but Suppy is kinda filling that asshole sized void I had in my heart.

[@HooniganProjectGarage]

Comment of the day!

[@jtsmith4434]

This is perfect

[@garlicbutter1906]

It's reassuring when someone wise disapproves. It's better when they want to do it again, though.

[@bmcshane80]

Put this on a shirt...

[@meffycodrin1853]

asian too =))

[@STHLance251]

1:40 "I just want to make sure we get all the sauce" **cuts to a beauty package with it parked straight**

[@HooniganProjectGarage]

THE SAUCE DRIED UP

[@wilsonmorales1173]

what size rims are does?

[@treerexaudi]

x'd

[@FRAN6A]

@@wilsonmorales1173 They 10s, but he keep 'em clean though.

[@wilsonmorales1173]

Franga llmaoo

[@joealex65]

Vin is just flexing on us with his Flexus! 😂

[@REAPER3fitty]

That's Vargas' Lexus.

[@cameronwilliams6772]

I’ve not heard the term ‘flexus’ that’s amazing 🙌❤️ 😂

[@christopherwilliams6048]

@@brokenmember1658 those wheels look great imo

[@trevoradams8477]

Even when there's a pandemic, Carcaine prevails

[@tunedub]

Trevor Adams it’s the only cure bro!

[@Andrewlang90]

Addictions don’t care about pandemics lol

[@1970HondaCL100]

I'm doing my best. Hope you guys are good.

[@curtbonner104]

Carcaine is a helluva drug...

[@manofwar00]

The magazine trick, is mini trucking 101! 👍

[@Ashal008]

Bendy

[@Matty.Hill_87]

Has Zak been hitting the gym this quarantine? Dudes looking like a tank

[@HooniganProjectGarage]

Zac has never left the gym

[@fangk.7367]

Man’s pecs are fucking massive

[@Matty.Hill_87]

Whatever he's doing it's paying off!!

[@Evanator5000]

he used to be in a lot of broscience videos!

[@CtrldKilla]

@@Evanator5000 really? I need to find these!

[@spinninsmokeshow]

When do we get to see some of suppys rides at the burn yard?

[@HooniganProjectGarage]

He needs to ship them out to CA. Well, besides the FJ60

[@ThePickle07]

Vinny is a one upper! He is the friend that has to out do all everyone when it comes to mods. Every group needs one of these guys. Keeps everyone progressing

[@larrymccandless8723]

Seriously though, these new 'old style' vids are why a bunch of us started Subscribing to Hoonigan. Thanks.

[@milo.chothia]

damn Suppy handing out burns needs a compilation vid

[@Whit3boy_built]

Vin i appreciate the super slam without -20 of camber 👌🏼

[@yosephmcjoe9575]

Gotta love Suppy, dude's hilarious, seems pretty damn genuine and doesn't take shit from anybody. Can't wait to get to see him working on some of his own cars in this series

[@johnchristall1367]

Vin has a boss fleet, they all work and look sick af. He's almost too fancy to be a Hoonigan but then redeems himself by flexing on the boys and scumbaging others into doing dumb sh!t. Vin's the low-key MVP

[@dantimmerman6693]

Celsior/LS430's are easily my favorite Toyota Sedan.

[@r.h.5500]

all of Vin's cars are my fav hoonigan builds.

[@samthesr20man]

I can just see Zac screaming "steaks and weights baby!!"

[@MarkosMylonas]

Glad you liked the simplicity of the IS Bushings! Most independent shops want $500-$600 to press out the OEM ones, as you have to have a special Toyota tool to do it!

[@Rahziel420]

Glad to see you're around still. When are you gonna give the burnyard some flip-flop donuts?

[@MarkosMylonas]

Rahziel420 thanks man 🍻 gotta have something to do burnouts in first! Hahaha

[@Rahziel420]

@@MarkosMylonas scumbag Sally into letting you drive!

[@DnBBHox]

7:20 You don’t need to measure for a hole like that, send a small drill bit up from the bottom, centered to where you want the hole to be, then use that hold for the hole saw pilot when you start drilling from up top.

[@colebelt348]

That fitment tho vin!! You gotta stop flexing on everyone so hard

[@asadkhan-qm1my]

Vinny " I love to scrap my undercarriage" anatra

[@HooniganProjectGarage]

No way, it's bagged

[@asadkhan-qm1my]

Prove it, show us Vin's undercarriage 😜

[@RUNITSTRAIGHT]

Hoonigan Project Cars so who has the lowest car at ride height? Bags don't count

[@walkingthroughlife4092]

C.L.E.A.N. !!!!! Thanks to all the Hoonigans!

[@Foaplo]

These golden episodes are brilliant but Suppy makes every video better!

[@alvinfisherii1341]

Shout out to soupy as hands down one of the most clutch additions to the hoonigan cast! Vin you the man too lol

[@RamosDominicano]

Vin has the sickest collection out of the guys in the shop. Not counting the RWB lol.

[@dattepo7534]

Vin you have some sick whips

[@holzwurm_hd7029]

The Speakers finally came! Great sound! Ill order two more!!!!

[@D.MONEY_]

Big body slammed looks amazing all it needs it’s LEDs for the whole front

[@transamericanlife]

I am so thrilled there is finally a Lexus LS in the shop.

[@gerald_thegatcat8274]

7:26 I agree with Suppy, I don’t like Crome

[@Krith220]

good thing it's not chrome then :D

[@danielclements8653]

If he a 400 and an obs he'd be living my dreams, the 430 and raptor are like the modern dream

[@RustyShackleford000]

Zack sounds miserable at the end of the video

[@teemuunny2612]

That was fun Vic! Thanks for sharing and teaching us some cooooool ish

[@rotgusiness7421]

Love the scumbag-distancing.

[@ALKA3R]

this series is so awesome, always great seeing a new video from you guys

[@__Lurch__]

I saw this rolling around East Long Beach a few weeks ago, looked like Vin driving. Spring & Bellflower. She looow.

[@ecarasig]

Vin with a working fleet...get it son! I thought that was a bad boy entertainment lex. Looks dope...

[@mikemartin1200]

wait wtf i thought this was herts, its literally my fav kind of daily. sadly i have nothing now and would love to just have even one of these lol. anyway i love it, just add illumaestetic lighting all around, make it look like the future vin, stay safe fellas

[@gabewilliams6625]

That was the best fender trick tip I have ever seen 😀😀

[@IllNacs]

Thanks for the 135$ savings guys, bought mine right away!

[@diiviinemedia]

okay now this is epic

[@lsanc951]

Vin: what do you think about my big chrome rims? Suppy: I don't like em, I dont like chrome. Vin: they're not chrome, they're polished.

[@dillon1669]

maaaan at 16 I stuffed a phone book in my quarters and watched magic happen ahahaha awesome stuff

[@themarkedoffgalaxy]

“For not measuring I’d say that’s pretty spot on.” 😂 👌🏽

[@moisesmora2098]

VIN is Making that Hoonigan Monayyy!

[@YoungFlyMexicanNetwork]

Phone book technique it's from low riders back in the day my uncle was loco 64

[@PatonHaus]

I bet you could find some quality rubber grommets to pop into those holes to seal off the engine bay again. If you silicone them in they should just stretch if the upper ball joint happens to touch them.

[@okamiidandi550]

I hella needed that part number thank you so much

[@nicholasxridiculous]

Michael Rosen gif is the best part! Nice job boys!

[@HardcoreMotors]

Just LS it already. Make it an LSLSX. How bout that? Would make a decent licence plate too.

[@oku1317]

That would ruin it.

[@evanboubouka3031]

Yes! Another Bishop Bullwinkle reference!

[@gustavofigueiredo1798]

Lower = Gooder

[@joshbsz]

That LS is Icy AF ❄️

[@evanhasner]

Koves are rebranded generic amazon speakers.

[@aserta]

linustechtips.com/main/topic/931569-kove-speaker-is-misleadingscammy/

[@evanhasner]

@@aserta thank you. More people need to know this. I post it everytime they rave about these crappy speakers

[@subdubbin6127]

@@aserta LTTStore.com

[@temio.463]

This is not outside the scope of just normal marketing strategy

[@moritzdo8305]

Well that's why you always buy stuff from real known brands.

[@jacksonleary802]

If the next video from vin isn’t him doing a full junction produce interior I am gonna be miffed

[@jasonargyropoulos2674]

This car makes me so sad for my LS430. Mine has door dings and scratches all over, wheels are pitted and finish is chipping off everywhere, clear coat is fading. but at 180k, runs perfect and the interior is still pretty good.

[@amyteshima]

Sounds like it does what it needs to do :) the rest is just icing on the cake.

[@petermillar5302]

Phone books work super well to roll fenders especially when you use different sizes

[@vipecrx]

7min 30 into the video. He's cutting holes to be lowere when parked. Clever. All of this could have been done at home. They are at least 4 in there. Good work @hoonigan.

[@vipecrx]

8min 15, rolling fenders with magazines! How novel...

[@krispykruzer]

Great video, buy guys, social distancing and isolation is more important than cars or videos for us... Plz do take note...

[@HooniganProjectGarage]

This was filmed two weeks ago.

[@dylanherring8054]

Did we even get this model in Australia I want one so bad

[@Mo_tism]

SPUDS ME DAD AYE we do, they’re anywhere between 10 and 18k at the moment

[@V8.77]

I really enjoy Suppy's humor, just the right amount of asshole-to-funny ratio lol. Thanks for the content guys, really been enjoying it

[@ceb19900]

Vinny. Proving that ‘Stance Nation’ ain’t on lockdown!

[@cartersargenti9324]

Anybody remember Darnall? Supply is literally the asian Darnall and I love it.

[@nefariouscj9791]

For real I love that ls430. I have an ls400

[@stankhunter666]

That shamelessness on the plug haha

[@crocketmannn8271]

That Lexus is absolutely gorgeous

[@josecuascut7123]

Is there a link to where you got the bushings from? I gotta do the same to mines. Thnx!

[@TheMuzikall]

The guy at the very end😆...Seeing is Believing

[@mpmagnussen]

Every minitruck owner ever: hold my beer

[@steelcityrooferjm]

I thought everyone knew about this trick... i learned this when i was a teenager back in the late 90s

[@nicknyaa]

0:25, 1:15 We get it, his name is Vin

[@recruit_life0715]

Vin tryna 1 up everyone in the squad. Achieved

[@ls6-ss413]

Loved all my hotrod and car craft magazines. Frieburger and magnante together... good stuff. And don't bash your inner fender like that man! Damn that's a bad look

[@Uneek637]

I see Vin watched Soundmanca for some control arm clearancing tips.

[@kalogias]

"let me think about th....no" killed me

[@mykrrrr]

Are you going to weld up the towers and paint it so it doesn't rust out? Not normally a bagged car guy but it does look pretty dope.

[@markmitchell2838]

Vins cars are killing it! even though he is a skumbag

[@rustyshackleford6463]

Vinny got that old mob boss status going with this Lexus.

[@gustavofigueiredo1798]

More low = More good

[@motomax13]

So clean

[@MrQMX5]

Lookin' nice. Time for some LEDs in those bumper lights, though.

[@PumpkinPieces33]

love my older commuter speaker I got through your promotion last year, hoping they adjusted the low battery warning to be quieter than an amber alert on the new model, either way ordereddd

[@Sirmellowman]

for how much I hate that chrome on any color look I really respect vins car. he did it right.

[@HooniganProjectGarage]

is polished doe

[@Sirmellowman]

@@HooniganProjectGarage I don't think what it's made of is the point, it's how it looks

[@tannerbench3951]

Yes! Keep me entertained!!!

[@kevinwashington7311]

Definitely getting a LS soon!

[@miguelbeltran5888]

What white tool box is that you guys have with all those nice tools

[@juniorlopez9723]

Suppy is the engineering god

[@bodeine454]

Will the magazine trick work if you need to pull the fenders out say a half inch or so? I'm wanting to put 19x9.5 +22 wheels on the front of our LS430 and 19x10.5 +22 on the rear so I'm gonna have about a half inch of stick out in the back, not sure about the front yet. Only thing trying to do this on our car is it has a stock spring suspension on it for now.

[@Scumbvgg]

Bro I finally got mine isn’t lowered yet but I’m real happy wit it

[@antoniowhite5378]

Hey what are your wheel specs?? Looking for similar fitment?

[@GustavCarl17]

You didn’t have any old issues of 0-60 Magazine for rolling your fenders? I heard that paper is pretty thick.

[@Matt_Lanzer_13]

It would be dope if you guys could film some at the home garages. Would be a cool change of pace... also, Let’s get some Ute content if you can!!!

[@genoquichocho3492]

Take your lex to someone who has a techstream oem scan tool and disable your daytime running lights. 👌🏽 looking nice vin

[@steveafanador6441]

Kick ass land yaht Lexus. Looks awesome 👌

[@Biggja22]

Shit back in the day we used wood baseball bats and a couple dudes standing on the bumper driving back n forth

[@dzaonyout]

Would these kove commuter 2 split speakers work in an old truck like Zac's? I don't have boomsticks but I currently have trash 6x9s behind the seats. Thanks!

[@erickvanes1285]

Really nice ride.

[@HalfSeasOver]

got the kove headphones and kove speaker too. Wicked cheap, couldn't resist.

[@Willa_Doo]

Weekend Warrior.