Nice job, using basic tools in anyone's garage. Well done.
@FALCON390Workshop11 ай бұрын
Thanks 👍
@awworkshop39364 жыл бұрын
Love the handle...😍😍👌👍👍
@FALCON390Workshop2 жыл бұрын
Thank you👍
@LastTruthSeeker2 жыл бұрын
Fajne filmy. Podziw za talent.
@FALCON390Workshop2 жыл бұрын
Dzieki mistrzu ☺
@catharinepizzarello47842 жыл бұрын
Beautiful!
@FALCON390Workshop2 жыл бұрын
Thank you!
@GT_Racer3474 жыл бұрын
That was fun to watch! Turned out great too. 👍🏻👍🏻
@FALCON390Workshop2 жыл бұрын
Thanks
@juanguajardo8732 жыл бұрын
Excelente trabajo goodkenf goodyop 👍🏼🔪😃✌🏽
@FALCON390Workshop2 жыл бұрын
👍
@christiankoellner75424 жыл бұрын
This guy is shaping things but not restoring, mostly using the wrong tools. His eye sight equals his knowledge of restoration and his lack of feeling for antiques. Watching him lets me shiver.
@gheorghemilea9454 жыл бұрын
De acord! Asta nu e restaurare!
@FALCON390Workshop2 жыл бұрын
Thanks for feedback
@michaeldavid61713 жыл бұрын
I liked how you made a paper cut out of a better looking cleaver
@FALCON390Workshop2 жыл бұрын
👍
@patrickstoquert16374 жыл бұрын
Très belle restoration ☺☺☺☺☺☺
@FALCON390Workshop2 жыл бұрын
Thanks
@the_nikbal5 жыл бұрын
Отличная работа. Как раз про похожий топорик снимаю. Есть что взять на заметку. Молодец.
@FALCON390Workshop5 жыл бұрын
Thank you mate !
@АлександрКузнецов-ж5я5 жыл бұрын
Надеюсь не такую же рябую фигню сотворил, а нормально отреставрировал.
@the_nikbal5 жыл бұрын
@@АлександрКузнецов-ж5я ещё не доделал. Буду надеяться что по крайней мере не хуже получиться. )))) Я только учусь.
@АлександрКузнецов-ж5я5 жыл бұрын
@@the_nikbal что значит не хуже? Надо только супер всё делать! Хотеть значит мочь! Всё только на высшем уровне ваяй! Не поддавайся клопам - чешись!
@EDWRFle5 жыл бұрын
Beautiful work I love the cleaver
@FALCON390Workshop5 жыл бұрын
Thanks a lot :)
@КошмарКошмар-й2б5 жыл бұрын
Hi bro 👋👋👋 good to see you 🤝🤝🤝 very good restoration butchers cleaver 👍👍👍
@FALCON390Workshop2 жыл бұрын
Thanks
@tristanbarnett62714 жыл бұрын
Great job love the handle what I love about a hold me cleavers as you can modify them and not normally have to worry cuz I made out of so much thick material you can modify them just a little bit and it won't make a difference
@FALCON390Workshop2 жыл бұрын
👍cheers
@rickydockins2779 Жыл бұрын
Almost there but no cigar. More work on blade. 6 out of 10
@FALCON390Workshop Жыл бұрын
Thanks
@markneo14 жыл бұрын
Show de bola 👏👏👏🇧🇷
@FALCON390Workshop2 жыл бұрын
Cheers 👍
@eskee14 жыл бұрын
I could really utilize this..
@FALCON390Workshop2 жыл бұрын
What do you need this axe for ?
@edbartlett66883 жыл бұрын
Hi the trade mark is gilpin they are made in Sheffield
@FALCON390Workshop3 жыл бұрын
thanks for letting me know.
@oneshotme5 жыл бұрын
And that's why you see all these makers shape the handles before glueing lol I had to raz you a little Enjoyed your video and gave it a Thumbs Up
@FALCON390Workshop5 жыл бұрын
Thanks!
@mikayle30284 жыл бұрын
Safety first , be careful always .
@FALCON390Workshop2 жыл бұрын
👍
@XLAdvRider4 жыл бұрын
Great work! Nice handle work too! The pitting is "character" but also a hygiene issue making the blade harder to clean between uses. It looked pretty thick but wonder if the pitting could have been ground out without taking away too much thickness?
@FALCON390Workshop2 жыл бұрын
Pits were very dip. Hard to take them out completely
@viktorwilms19052 жыл бұрын
Зачем он отхреначил под ножа, ведь там не было коррозии,для чего облегчать???
@FALCON390Workshop2 жыл бұрын
Because I wanted to
@papavaliquette49784 жыл бұрын
What did you use on the grinder for the final polish?
@FALCON390Workshop4 жыл бұрын
That was a metal polish on felt wheel if I remember right
@papavaliquette49784 жыл бұрын
@@FALCON390Workshop thanks.
@michaelcowey14684 жыл бұрын
Why change the shape of the cleaver. You take away the shape and you take away the character. Its no longer a butchers cleaver now its just a cleaver.
@fabiankawau33622 жыл бұрын
Smacked the nail square on the head on that, mate 💯👍
@FALCON390Workshop2 жыл бұрын
It still works as a butcher cleaver. If it works and get the job done it can be called anything 👍
@maxpolaris993 жыл бұрын
Why do restorers stipple the metal with a punch when there is deep pitting?
@FALCON390Workshop3 жыл бұрын
to match the texture of the surface
@luluc13365 жыл бұрын
Love the handle. Good job 👏🏽what wood did you use?
@FALCON390Workshop5 жыл бұрын
Thank you Lulu! I'm glad you like it. I use walnut wood for this.
@wanmohdilyasismail27844 жыл бұрын
You cut sharp part..it look great..but aim not happy
@FALCON390Workshop2 жыл бұрын
Why are you not happy ?
@joannebalzano52125 жыл бұрын
Do you sell them I am looking for one?
@FALCON390Workshop5 жыл бұрын
I do sell some of my items.
@brutalbrital Жыл бұрын
Put your power tools away and do it by hand then you might learn the process better, those brass inserts have gaps from not being clamped properly. Number one rule when clamping…when you think you have clamped it enough, put more clamps on. I am a semi retired knife maker so not just some internet wannabe. All things considered not a bad job considering all the rubbish tools you used. But knife making and restoration is a learning curve. Good luck with future projects I hope you get to invest a little more in tooling and one final thing…..slow down and enjoy the process, it’s more satisfying that way.
@FALCON390Workshop Жыл бұрын
thanks for the tip and your feedback
@noelgibson93793 жыл бұрын
Why do all these videos show the object in normal motion and all the real work in fast motion.And also do these people know ho to talk, it would be nice to hear the procedure
@FALCON390Workshop3 жыл бұрын
Its about the object not person who work on it
@The_BlackFish3 жыл бұрын
Do. Not. Watch. With. Headphones.
@FALCON390Workshop2 жыл бұрын
Sorry about that
@alexh.40685 ай бұрын
To each their own but you basically destroyed a vintage cleaver. Not a true restoration, just using it as scrap. Solid effort though.
@FALCON390Workshop5 ай бұрын
Thanks for feedback
@mocopas-la79595 жыл бұрын
Nuulll
@FALCON390Workshop2 жыл бұрын
Thanks for feedback
@martybernier9313 Жыл бұрын
To say the least, Im not impressed. There is 21 minutes i wasted.