Watching this and was struck by how much weight you have shed. Looking very fit and svelte, sir. Well done!
@jrkorman Жыл бұрын
Agreed. I've been noticing that over the past couple of months. Glad to see it also! Keith's breathing a year ago was concerning.
@WreckDiver99 Жыл бұрын
Noticed it a while ago, refrained from saying anything for a bit. He's really looking good that's for sure. Too bad I found all that weight he lost. :(
@dennismedvee8621 Жыл бұрын
I guess we can say--"The less we see of Keith, the better".
@donmedford2563 Жыл бұрын
@@WreckDiver99 I was going to make a comment to Keith and say the same thing. I am happy for him that he can lose weight but I am angry that he sent it all to me. lol
@davidmontgomery1016 Жыл бұрын
🤣🤣🤣I really expected to be dead before email was referred to as "old fashioned."
@chaschan60 Жыл бұрын
I wish I lived closer, this is very cool.
@melshea2519 Жыл бұрын
Good morning Georgia 😊
@gringofett3944 Жыл бұрын
Want to also complement you on getting slimer! I have been working on that myself and so I know how helpful it is to have people tell you you are doing great!
@12345NoNamesLeft Жыл бұрын
Keith, great job on the fitness, it's paying off and I know how hard it is to do it and keep it up.
@smaggies Жыл бұрын
Great library for all machinist. Thank Keith :)
@RRINTHESHOP Жыл бұрын
I wish I could make it Keith, I have use your website many times. Thanks for sharing so much.
@transmaster Жыл бұрын
Keith you need to have someone enter all of titles, catalog numbers, machine manuals and such into a spreadsheet. This would make it easy to keep track of what you have.
@kindabluejazz Жыл бұрын
He's been doing this archiving for over 20 years on his website - I think he knows what to do. He needs eyes, backs and hands to help, if helping is what you're interested in doing.
@charliemason4355 Жыл бұрын
Keith, it says a lot when email is considered "old fashion"!
@donmedford2563 Жыл бұрын
I had to chuckle when he said that was the good old fashioned way. lol
@jaybailey3518 Жыл бұрын
What a daunting task !!! You're a GOD !
@Farm_fab Жыл бұрын
For those who are unaware, Keith is in sath Jawjah, which is noth of Flahda.😅
@ke5wl804 Жыл бұрын
What happens to the physical copies of the manuals after you finish scanning them? Thanks for all your great work digitizing all these. Really enjoyed the video showing the setup and process you use.
@donmedford2563 Жыл бұрын
I was wondering the same thing. He said this is the largest SINGLE donation to the site. That means he has MOUNTAINS of manuals that he has already scanned. I wonder what he does with all of them.
@floridaflywheelersantiquee7578 Жыл бұрын
I wish i could be there thanks for sharing
@rossgebert-goldsmith183 Жыл бұрын
Looking good Keith
@georgeescaped6035 Жыл бұрын
i'm thinking you will have LOTS of help i would be there except it's a long drive from Nevada!! have fun
@daviddauphin838 Жыл бұрын
Nice haul - congrats!
@katelights Жыл бұрын
have to try and not get distracted reading the old catalogs :D
@hilltopmachineworks2131 Жыл бұрын
Yeah I bet there some cool photos in them.
@kimber1958 Жыл бұрын
Thank you Kate for sharing I look forward to meeting you at the bars these summer bash. Kimber
@khubba10 Жыл бұрын
Fellow Keith from Jax, sent an email, 2.5 hr drive is very doable and would love to drive up to meet you and help out.
@KeefyKat Жыл бұрын
Now we know where all those boxes of classified documents went!
@davidk537 Жыл бұрын
I'd like to come and help I'm in the northeast corner of Pennsylvania
@johnfriend240 Жыл бұрын
Would love to help but long trip from SoCal. Will see you at the Bash though!
@stephensmith8756 Жыл бұрын
Keith You've lost so much weight ! I hope and pray it's because of a plan and not some other condition. I showed you six months ago, and presently, to my wife, who is also going through a weight reduction programme and she said immediately, " he's had his stomach stapled ". I respect that's your choice, but if that's so, it's had a dramatic effect. Keep the great videos coming. Best regards from Albion Park, NSW, Australia.
@garybrenner6236 Жыл бұрын
I hope one of the visitors will ask about the Stoker Engine.
@elcheapo5302 Жыл бұрын
I've been subscribed so long, I remember when the videos were filmed there. And when the cameras were stolen. Wish I was close enough to stop by and help out, Keith. You're looking great, btw.
@markbernier8434 Жыл бұрын
I think I would find it fascinating but the travel is out of the question currently. I would like to know how you are scanning all that literature and perhaps a clip of what you are using.
@Sizukun1 Жыл бұрын
He's shown it in a couple setups before, years ago. Its a strange erector set style of a scanner to grab both pages of the book. Its been setup in a spare room in his house for years now.
@markbernier8434 Жыл бұрын
@@Sizukun1 Thanks. I was wondering as I have seen some insanely expensive book scanners at a museum.
@felderup Жыл бұрын
i wonder if anyone has the old lindsay books scanned... gingery's books were sold there for a while, they'd be good to reprint.
@wags9777 Жыл бұрын
A van norman 1/2 manual would be sweet
@canuckloyalist4681 Жыл бұрын
1223 miles...i wish you were closer!
@mikewatson4644 Жыл бұрын
I would love to come and help, but.... a 23 hour drive each way is a little more than I can handle. Good luck
@pvtimberfaller Жыл бұрын
Do you ever get throttle time on that little steam locomotive anymore?
@joopterwijn Жыл бұрын
Sorry Keith, living in the EU Netherlands, over the big splash. A bit out of range😢
@RobertKohut Жыл бұрын
Lookin' slim... 🙂
@ronsreadyornotshop Жыл бұрын
Is there anyone that can take me from exit 61 or 62 to Keith's in the morning?
@RB-yq7qv Жыл бұрын
Hi Keith. Do you have an area that can take vans or campers were people can stay for a couple nights.
@NotJRB Жыл бұрын
Maybe send an email to Keith with that question.
@charlesmiles9115 Жыл бұрын
😛😛😛😛❤❤👍👍👍👍👍
@geneard639 Жыл бұрын
I really wish I could. *sigh*
@JohnDoe-es5xh Жыл бұрын
Maybe Dominion scanners could be abused for this huge task, if many ppl willing to help.
@scrotiemcboogerballs1981 Жыл бұрын
Thanks for sharing hope you had a great Father’s Day
@kirksnyder6190 Жыл бұрын
My advice, make duplicate copies on a harddrive, disks, etc., with a computer that can be used and place this info in a faraday apparatus.
@AB-these-handles-are-stupid Жыл бұрын
Please vet anyone coming over
@AB-these-handles-are-stupid Жыл бұрын
Even if it is something simple
@ianhelsbyservices Жыл бұрын
@@AB-these-handles-are-stupidlike a minimum $50 donation as entry fee?