This video will guide you on how to attach and remove the clippers guard or comb guide.
Пікірлер: 88
@JunbaTeks6 ай бұрын
Be aware that some trimmer guards cannot withstand this method and it can cause damage.
@cindyl81162 ай бұрын
Thank you for making this video. I got this for my Dad from Temu and had no idea how to insert the comb. Thanks
@JunbaTeks2 ай бұрын
You are so welcome!
@IncognitoTS9 ай бұрын
The side stoppers keep popping out of place when I start the clippers, thus causing the blades to not align and not cut hair... How can I fix the issue
@JunbaTeks9 ай бұрын
The trimmer guard is too tight sir, that's probably the reason. What I'm doing there is just stretching or sanding it to loosen up a little, and don't forget to apply oil.
@mirjaashrafuzzamanmishuk71478 ай бұрын
Thanks brother 😊 Love you from Bangladesh ❤
@JunbaTeks8 ай бұрын
So nice of you love ya too. 😍
@4mal_dev9 ай бұрын
How to change that blade or how to sharp that ??
@zorentarroyo470111 ай бұрын
I just want to ask, if the universal clipper guard is compatible to the vintage t9 razor? i want to buy another set of clippers guard because i only have 3 sizes.
@JunbaTeks11 ай бұрын
Ok lang sir universal kasya yan.
@tvramkumar Жыл бұрын
U almost stopped me from breaking it otherwise.😂😂👍👍👍👍
@tvramkumar Жыл бұрын
Alas it broke after 3 Rd use.
@sltv45129 ай бұрын
i am also
@Seven-xk2ri6 ай бұрын
😂
@tadey4097 Жыл бұрын
ut when i put them on it doesnt work it doesnt move
@JunbaTeks Жыл бұрын
Maybe the comb is so tight, it can be reduced with sandpaper or a cutter blade.
@cricketvibewithsaurabh2501 Жыл бұрын
Same here bhai
@judomastare15183 ай бұрын
Min har slutat funka☹️..?? Vad ska jag göra..?
@JunbaTeks3 ай бұрын
Prova den här metoden sir. kzbin.info/www/bejne/m4e8iWWFmJZ_l8Usi=dXEo3JoX9kYl5KKt
@sajidmahmud111116 ай бұрын
This video have helped me .... thanks a lot
@JunbaTeks6 ай бұрын
Glad it helped, thank a lot.
@Rald25tv Жыл бұрын
I have this type after i adjusted it, it couldn't move or trim hair🥺...what should I do🙌
@JunbaTeks Жыл бұрын
Maybe you reduced the adjuster too much bro. You need to adjust it back a little.
@MrMe-00610 ай бұрын
Thanks for this video, it work 👍
@JunbaTeks10 ай бұрын
Welcome 👍
@avinashroy611 Жыл бұрын
Can it be cleaned with water
@JunbaTeks Жыл бұрын
Alcohol is fine, but water can lead to rust.
@nelsgaltv5961 Жыл бұрын
Salamat sa paggawa mo sa bidyong ito kaibigan.
@cd-cl7kp10 ай бұрын
Just use the back of the small brush to pull it out. Simple method.
@JunbaTeks10 ай бұрын
Great idea
@Khihydfashion7 ай бұрын
Good
@JunbaTeks7 ай бұрын
Thanks
@sahilpantawane95279 ай бұрын
Really helpful 😃❤
@JunbaTeks9 ай бұрын
Glad it was helpful! Thanks Bro.
@lucky917yearsago4 Жыл бұрын
Thanks. Nalaman ko na sa wakas
@JunbaTeks Жыл бұрын
The best ka Idol. Thanks din.
@priyamchatterjee8157 ай бұрын
Thanks
@JunbaTeks7 ай бұрын
Welcome
@isaiahbalani2 ай бұрын
Bakit sir nung kinabit ko guard di na siya gumagana
@JunbaTeks2 ай бұрын
Bawasan ang claw sa guard sir sobrang higpit yan tingnan kung hindi sumabit sa movable blade.
@abdullahimohamed6795 күн бұрын
Nice one
@JunbaTeks4 күн бұрын
Thanks 🔥
@sltv45129 ай бұрын
thank you so much
@JunbaTeks9 ай бұрын
Welcome 😊
@143MvpRaja9 күн бұрын
best bro
@JunbaTeks6 күн бұрын
THANKS BRO 👍
@meldaps664 Жыл бұрын
Thanks 💯👍
@Seven-xk2ri6 ай бұрын
❤
@Sweetsmanbakery11 ай бұрын
Tnx dear ❤
@JunbaTeks11 ай бұрын
You're so nice. Thanks too.
@completovidi86566 ай бұрын
Thank you sir ❤❤❤
@JunbaTeks6 ай бұрын
So nice of you
@UzunAdam-cj3kq6 ай бұрын
helped me thanks
@JunbaTeks6 ай бұрын
Glad it helped. Thanks also.
@Biemnet-e8t6 ай бұрын
I teach from You thanks
@JunbaTeks6 ай бұрын
It's my pleasure
@berserk75176 ай бұрын
Hey bro kasyabha dito un mha nabibiling clipper guard sa shopee
@JunbaTeks6 ай бұрын
Ya bro.
@melfruS Жыл бұрын
So simple and useful.
@opgamer2.o7834 ай бұрын
Yah, i just broke 3 Guards in this method 1:48
@JunbaTeks4 ай бұрын
Sorry 😭
@SadiaNasir-v2w6 ай бұрын
I break😢
@JunbaTeks6 ай бұрын
Yes, some trimmer guards cannot handle this method. Sorry.
@xBl4CKyFTWx10 ай бұрын
Did this mine broke
@JunbaTeks10 ай бұрын
Yes, some of them are not good because they are cheap trimmers.
@benny71169 ай бұрын
same, they could have used a bendier plastic for the guards but they are too rigid and snap easy, whole trimmer got thrown in the bin
@IncognitoTS9 ай бұрын
The side stoppers keep popping out of place when I start the clippers, thus causing the blades to not align and not cut hair... How can I fix the issue
@JunbaTeks9 ай бұрын
Is it the original guard?
@Kraken6068 ай бұрын
Hi, I have this, it accidentally dropped on the floor, the light is on but it doesn't work.
@JunbaTeks8 ай бұрын
The possible cause bro might be that the rotor of the motor is tilted so it is difficult to turn.
@yadammani158311 ай бұрын
Good
@JunbaTeks11 ай бұрын
Thanks
@kennethrobinson1672 Жыл бұрын
Thanks
@JunbaTeks Жыл бұрын
Welcome sir
@rashed7314 Жыл бұрын
Thank you so much
@JunbaTeks Жыл бұрын
You're most welcome
@shohanurrahman60448 ай бұрын
Thank you for teaching this
@mujeebshar7438 Жыл бұрын
It's really help ful i was stucked while unlocking it attachment 😅
@JunbaTeks Жыл бұрын
Thank you sir.
@jawadAhmad-nn2wx Жыл бұрын
Thank man , i was about to break tht sh!t
@cd-cl7kp10 ай бұрын
Just use the back of the small brush to pull it out. Simple method.
@JunbaTeks10 ай бұрын
Cool, thanks
@bertfrextv843 Жыл бұрын
Maraming salamat idol.
@NeverLose997 ай бұрын
Thanks ❤❤
@anuradhachoudhary5476 Жыл бұрын
Thanks bruhh
@JunbaTeks Жыл бұрын
Welcome bruh anytime.
@colmcoleman6421 Жыл бұрын
thanks for help i bought one on line and didnt come with instructions on how to remove it