VintageDigitalWatches - Ep 31 - Seiko S234 missing segments corrosion repair

[@simonefiore5595]

Always a pleasure see a job like this. Well done Tibi

[@VintageDigitalWatches]

Thank you!

[@karlisok8996]

Used this silver compound technique and some microsoldering to repair a detached quartz crystal on a Baby-G BGM-100, now I have an alarm that plays "Bomboleo"! Thanks VDW!

[@TimeArtPiece]

Thanks for sharing your knowledge. Your videos are very informative and well done.

[@VintageDigitalWatches]

More videos are on their way.

[@thetechgenie7374]

I didn't know about that stuff and do micro soldering for years. I usually just use a thin hair 0.10, or 0.20 jumper wire to repair broken traces. As repair phones and ETC. I have a few Casio and Seiko LCD watches been collecting over the last few months and some need repair due to corrosion and broken bond wire. I may give this stuff a shot as least for the broken traces.

[@Allan_Fuentes]

Hello. Your videos are amazing!. I have been unable to find the conducting silver compound L100. Do you have an alternative?

[@danamoose1234]

Love this stuff!

[@Moosh89]

Awesome!! So cool to see! Thank you so much :)

[@VintageDigitalWatches]

More to come :)

[@rayatoune8628]

Thank you 👍👍👍👍👍

[@J.T.Stillwell3]

What’s with the 70’s shag music? But anyways I appreciate the work you do.

[@ronaldspencer547]

Well done.

[@igorcabrera8123]

Nice video, about the buttons painting, what paint and procedure you use? Thanks

[@thesswaffen3372]

Where do you get Silver conducting compound ?

[@willrobinson4089]

Brilliant!

[@sunbzy2412]

Can you review alba spoon watches? I can't to fix it.

[@toooldfortwowheels2048]

Just picked up a DOA H127-5000 at a market. Pristine inside and out but I suspect there's something like this internally.

[@Сергейдемьянко-ъ7э]

Hello. Please tell me thе accompaniment of these capacitors, for LCD display, citizen 8982 ana-digi temp.

[@javiertadeo8924]

Hola , buenos vídeos los tuyos,podrías subir vídeos como reparar relojes que no sirve la luz LED, gracias.

[@steve1811uk]

Hi, I have a Seiko M929 where an LCD segment has failed inside the glass. Is it repairable? Or do I need a new LCD display? Thanks in advance. Great channel content. Steve.

[@VintageDigitalWatches]

Hey, it can be either rhe board, LCD connector or LCD itself. Needs diagnosis.

[@steve1811uk]

@@VintageDigitalWatches thanks for the reply. It is the LCD itself. The etched track on the glass is fractured right near the edge of the LCD. I have managed to chip away a bit of the glass at the edge and I should be able to repair with some conductive glue across the gap.

[@vincenzopampilonia1683]

Salve o un casio 50qs-17 da riparare,se lo ripara io lo posso spedire,aspetto una sua risposta.

[@tabletacer7097]

thanks for video :)

[@hamdoaboahmad3450]

Please, my watch is an Orient digital, the colors of the screen are dimmed, what is the solution to this malfunction?

[@RyeOnHam]

Just like repairing window defroster traces.

[@MIPE83]

Absolutely great footage! Thanks a lot, now i will be able to repair many of my dead Casios. The tip with the silver conductor is gold! Would you tell me which type of microscope you use?

[@VintageDigitalWatches]

Hi, sure, it is a Novex AP-4, with 20x magnification, two oculars. But any microscope with 20x can do the job, of course having two oculars for both eyes helps. Tibi

[@tomasrosenberg3430]

How much would a repair cost if you would do it for a customer?

[@mohammadhafeez8224]

Very nice sir

[@saraspitefull32]

Hi there is there something I can use as a zebra strip because my seiko g757 is missing one for the lcd any help would be appreciated thank you

[@VintageDigitalWatches]

You can use a zebra strip from another watch but they have to match in dimensions. Also the G757 is notorious for fading or missing digits and not because of the zebra strip. It can be the capacitors or the IC on the board.

[@aj-cp9yu]

Is there any chance to repair a lcd that have segmented. No any damage on the board. And zebra connector is good.

[@VintageDigitalWatches]

Hmmm, before saying that the LCD is broken, you must validate that the board is working properly. You can do this with an oscilloscope and measure the LCD segments outputs from the board. You should see a square signal. Regards, Tibi

[@marjoriewhite7711]

Where do you get the L100 conducting silver?

[@VintageDigitalWatches]

eBay Germany

[@DeathWithTango]

Your videos are amazing man, quality work! Quick question, do you take requests? And if so, how would I be able to contact you? I have a few lcd/led watches that need to be repaired.

[@VintageDigitalWatches]

Hi Shane, because of little time I stopped taking watches in for repair. Tibi.

[@acharya9721]

Sir help me. How to solv screen is fade Casio al-180 .sir pls help me

[@VintageDigitalWatches]

Search my videos for faded screen

[@gececekinss254]

Bla Bla Bla Bla Bla Bla