Thank you so much for doing this video!!! I am new to this and working myself to death with using spray paint and so im switching to vinyl wraps and waterslides I already do the hydro dip but you’ve been the most informative on how to do all of this!!!! I love your video 😊
@ItsACraftThingAlishaVirgillo2 жыл бұрын
You are very welcome and thank you for watching! 😊
@sallymcgarrah9382 жыл бұрын
@@ItsACraftThingAlishaVirgillo your welcome!!!! I also definitely subscribed!!!!
@ItsACraftThingAlishaVirgillo2 жыл бұрын
@@sallymcgarrah938 awesome! Ty so much.
@georgialewis40462 жыл бұрын
absolutely love the sunflower pen! Great job!
@ItsACraftThingAlishaVirgillo2 жыл бұрын
Thank you 😊
@monicalivery2 жыл бұрын
Niceeeeee
@ItsACraftThingAlishaVirgillo2 жыл бұрын
Ty 😊
@MysticMerGirl Жыл бұрын
These were great! Thanks so much! Your instructions were on point, precise & very easy. Sorry I didn’t find you sooner 😊
@ItsACraftThingAlishaVirgillo Жыл бұрын
Thank you so much for watching. I have a ton more videos. Hope you subscribed as well 😊
@dianesevilla86333 жыл бұрын
I just love watching you create all these beautiful items.
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Thank you! 😊
@dianagrimont16302 жыл бұрын
Great tutorial thank you I want to try hydro dip
@ItsACraftThingAlishaVirgillo2 жыл бұрын
Your welcome. I love to hydro dip. The results are unpredictable and beautiful. 😊
@joycepugh53472 жыл бұрын
Water slide you can put on like a tattoo - just mirrors your image - & put water on pen or what ever your putting your image on - very nice😊
@ItsACraftThingAlishaVirgillo Жыл бұрын
Thank you!
@barbboyd43823 жыл бұрын
If you use mirror before printing your water slide (for the name) ,then you can lay it face down on your pen or surface and slide the back paper off. It works better for me this way.
@ItsACraftThingAlishaVirgillo3 жыл бұрын
I think I saw someone do that before. I'm going to have to try that. Thank you 😊
@loramillet66263 жыл бұрын
Beautiful! Do you need to coat it with mod podge after dipping it in marabu inks and before epoxying?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Nope. I went right in to epoxy.
@loramillet66263 жыл бұрын
@@ItsACraftThingAlishaVirgillo Thanks!
@gingeranderson44583 жыл бұрын
They are so pretty, did you make the waterslide the same size as the printable vinyl rap
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Thank you. I made it a tad shorter so the image didn't over lap.
@angietheriault70522 жыл бұрын
Can you use nail polish instead of the marble drops
@ItsACraftThingAlishaVirgillo2 жыл бұрын
Yes.
@juliasnider59053 жыл бұрын
New at this and loved watching your video! Learned more here than watching others. I have a question, I have problems with my lungs and was wondering if I could use Crystalac Brite tone instead of Epoxy to seal the vinyl wrap pens? Thank you!
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Welcome! So glad it helped. 😊
@denareynolds7962 жыл бұрын
What type of cricut do you have to do the printable vinyl?
@ItsACraftThingAlishaVirgillo2 жыл бұрын
I print with a HP Envy Photo printer and I use the Cricut/Explore Air to cut my vinyl.
@kimberlygoldman10643 жыл бұрын
Thank you for the awesome video! I just found you and I’m so glad I did! I’m VERY new to all of this and your tutorials are wonderful!! Where did you get your top? LOVE IT 🥰
@ItsACraftThingAlishaVirgillo3 жыл бұрын
You are very welcome and thank you! If you mean my "Bad Mom" top, I made it. 😂😊
@kimberlygoldman10643 жыл бұрын
@@ItsACraftThingAlishaVirgillo I Love it!!! I need one of those in my life lol
@monicaarismendez20603 жыл бұрын
Great video..do you seal the waterslides?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Thx Monica. Nope. I just epoxy right over the water slides.
@ericavivas13873 жыл бұрын
What size do you cut your vinyl?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
6 minutes into the video I show you in design space the height and width sizes.
@brookesisson54662 жыл бұрын
Where did you find your weeding tool!? I have been looking everywhere for one like that
@ItsACraftThingAlishaVirgillo2 жыл бұрын
I kind of made it. You can check out my tutorial kzbin.info/www/bejne/gpy1Y3WEasaKfq8. I purchased the actual too from Ante Up Graphic Supply. Which I just looked and they are out of stock right now. anteupgraphicsupply.com/curved-weeding-tool/
@amandalee62022 жыл бұрын
How long does it generally take the epoxy to dry? How many coats of epoxy do you put on the printable vinyl and waterslides?
@ItsACraftThingAlishaVirgillo2 жыл бұрын
Dry times vary depending on the epoxy you are using and the temperatures in your craft space. A lot of epoxy is dry to the touch in about 8 to 12 hours. There are quick cure epoxies that dry to the touch anywhere from 2 to 6 hours. I always put 2 coats of epoxy over any of my projects whether it is glitter, vinyl or waterslides and no matter what epoxy I am using.
@tanyatucker23 жыл бұрын
for the vinyl wrap, do you have to epoxy the pen first?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Nope. I don't even sand it. Easy peasy.,
@brandiboles133 жыл бұрын
When you Hydro drip - are you doing a coat of epoxy before you dip?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
No. Just sanded and spray painted.
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Hi Brandi.,No. I just dip right over the spray paint.
@shawnminarik49363 жыл бұрын
Do you use the matte or gloss printable vinyl?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
For this project I used Matte.
@sallypoultney43313 жыл бұрын
Where can you purchase refills for the pens and the name?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
So Amazon has ink refills but they are not by paper mate. I'm going to buy them to see if they fit. I will keep you all posted.
@revameadows22113 жыл бұрын
What do you use to plug the pen while you epoxy
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Hi Reva. I use a q-tip wrapped with painters tape.
@revameadows22113 жыл бұрын
@@ItsACraftThingAlishaVirgillo thank you
@ericavivas13873 жыл бұрын
What kinda paint do you use for hydro dip?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
The base was Rustoleum 2x Matte white and metallic gold spray paint. The paint in the bucket is Maribu Easy Marble.
@brittneyreanae65433 жыл бұрын
My vinyl wrap isn't exactly flush towards both ends. What is the trick here?
@ItsACraftThingAlishaVirgillo3 жыл бұрын
Does it over lap?
@brittneyreanae65433 жыл бұрын
@@ItsACraftThingAlishaVirgillo yes it does slightly.
@ItsACraftThingAlishaVirgillo3 жыл бұрын
@@brittneyreanae6543 oh wait, you mean at each end you can see a little bit of the pen? If that is the case, you want that so the epoxy seals the vinyl to the pen.
@CrystalWilliams-rt3zm3 жыл бұрын
What are you using to plug the ends of your pens?
@revameadows22113 жыл бұрын
Following for the same question
@ItsACraftThingAlishaVirgillo Жыл бұрын
You can use anything silicone. I used toothpicks wrapped with painters tape.