How to take a basic digital pen wrap off Esty and create a custom wrap!

[@daricezdrazil7399]

This helps tremendously as I was struggling with my waterslides I made.

[@devildollcustomcreations]

Aww awesome I’m glad the video helped 💕

[@mariangies]

Just found your channel and purchased this bundle. I like it a lot. Thanks.

[@devildollcustomcreations]

You are very welcome. I’m glad you like it!

[@lowee_warriorshipey7915]

I do remember this, and was one of the 200 that received a free painting, thank you

[@TheCraftyArtizan]

Thank you for sharing your process! You are very detailed and great with your instructions; very clear and concise. I appreciate that, and I enjoy your videos 😍

[@devildollcustomcreations]

Thank you SO much! 😊

[@gaylrobinson6793]

Awesome work and thank you 😊!

[@devildollcustomcreations]

You’re welcome and thank you 😊

[@beckyfrederick79]

Love your video. I am a beginner to this. Love trying new things. My question is what are the measurements ( width and length) for these pen wraps. I am only going to try one at a time. Thank you so much.

[@devildollcustomcreations]

Welcome to the pen life! Haha the size of the wraps kind of depends on if you are doing a printed vinyl over a blank pen or a waterslide over glitter, also what brand of pens your using (I use paper mate InkJoy pens). I would start at 1.45 inches wide by 4.85 inches long. You might need to trim off the extra with a sharp craft knife and once you get a feel for how thick or thin you are doing your epoxy/Brite Tone, you can change the measurements of your wrap to fit your pens better. I hope this helps 😁 Thank you Katrina Devil Doll Custom Creations

[@beckyfrederick79]

I am starting out with printable vinyl. Hopefully move on to other options

[@beckyfrederick79]

@@devildollcustomcreations Thank you very much. Your video is the best. Very detailed.

[@devildollcustomcreations]

Ok then I would say try 1.4x4.8 inches and see if that works. You could cut out a piece of printer paper out first and wrap it around your pen

[@cindyrios777]

What app do you use when making your pen wraps? I would like to make some pens. I have a ink jet printer and Design Space. TY

[@devildollcustomcreations]

I use silhouette studio

[@GrizzyBTW]

Can I use sublimation ink on the printable vinyl? Super new here 😢

[@devildollcustomcreations]

Hello. Ok no you can’t. Sublimation is it’s own thing and you have a sublimation printer with sub ink and paper plus you will need a sublimation blank which they do have pens plus tumblers ect. Then bake the blank with the sub paper taped to it But I print all my printable vinyl with my laser printer, you do still need to seal it once it’s on the pen because it will come off eventually If you don’t seal it under resin or crystalac.

[@sworley1956]

do you a tutorial for you bee pen that I seen on Etsy

[@devildollcustomcreations]

Yes I do it’s under the pen playlist

[@stacey1843]

Do you show how to make this design from start to finish? Or how to get those white lines in the designs of the patters of the prints?

[@devildollcustomcreations]

I’m showing how to take an already made pen wrap and how to customize it. 😁 In the future I will post a video on the start to finish how to create a pen wrap!

[@RainorShine1]

Is brighttone self leaveling?

[@devildollcustomcreations]

Yes however it dries a lot faster then epoxy, so you don’t have a whole lot of time for it too self level. I recommend using more thin coats but a lot of them compared to a thicker epoxy coat.

[@snkdesignsbykelleyvanscyoc2039]

Katrina what are the jumper rings called that have that extra tiny loop on it to hook the toggle to? I can’t find it on Amazon. Awesome video!

[@devildollcustomcreations]

Toggle Jewelry Clasps Necklace , silver small. Did I not link them in the honey bee pen video?

[@thebowstore3069]

If using printable vinyl. Do I have to use epoxy after??

[@devildollcustomcreations]

So not really HOWEVER it does get sticky after about a month of use, I tried it out to see. If you don’t use or want to use epoxy resin, look into crystalac Brite tone.

[@deanna5934]

Could you use printable sticker paper instead of waterslide or vinyl?

[@devildollcustomcreations]

I’m sure You can try but I never tried myself. Sorry I can’t help out more. If it works please let me know 😁 Thank you

[@genesispinto4204]

What kind of printer is needed for these pen wraps ?

[@devildollcustomcreations]

I have a brother laser color printer but really any printer can work but if it’s inkjet you will need seal your paper before adding them to your pens

[@dmrcreations3311]

I dont like using epoxy. Is there something non toxic or odorless i can use to seal the pen?

[@devildollcustomcreations]

YES I use crystalac Brite tone on 99% of all my pens and tumblers. I have a playlist dedicated to epoxy free tumbler/pens

[@AngelMakByAurora]

I appreciate you making a video like this, but this is extremely confusing like I mean extremely confusing. I have no idea what you’re doing whatsoever.

[@devildollcustomcreations]

I’m taking multiple designs and putting them together on silhouette studio. You can layer sayings on top of background pen wraps to create your own design.