Vinyl Wrapping Interior 2 (Mitsubishi Lancer 2008+)

[@sherlyslife8729]

Thank you for this! You inspired me to try this out but a different color! Thanks again!! Looks amazing ! 💯😍🔥

[@bluebee5087]

Bro if u not doing it yet you should u make mad money bro. U do a better job way better then some of these car shops

[@sarahedwards440]

You make it look so easy

[@Theronj89]

Thank you for the video I have a 2017 that I’ve been thinking of wrapping those parts. It looks sick

[@jeflui]

Yeah for me I wrapped it because the trim was just a silver/grey shade that didn't really match anything. I know on the newer models for the limited trims or something the trim was gloss black from factory.

[@oxymortal5967]

I have all the pieces to my lancer on my table.. your other video helped me get everything apart.. I've been getting ready to try wrapping my first time.. this video couldn't have come at a better time haha thanks

[@jeflui]

Oxymortal it took me a while to get the hang of vinyl wrapping. Especially with multiple brands of wrap each having their own wrapping qualities. I learned with 3M because it's probably the most forgiving vinyl. Just start off with the largest piece and practice is my advice for starting.

[@oxymortal5967]

Was thinking of doing the silver shifter plate and the extra fake buttons where switchs and stuff go.. how hard you think they would be.. thinking of just spraying the buttons if they are to small

[@jeflui]

I was going to do the shifter plate myself, but didn't have the time to take apart the center console to take out just the plate. The buttons would have to be removed with the panels that hold them because they are clipped in or something. Personally, they don't bother me too much, but I don't think they'd be too difficult to take out. Not to say that they are easy, but I could see it taking some time to do it all.

[@OBEDKHAOS]

I might have to try rewrapping mine now that you've done your second video. Love it!

[@jeflui]

OBEDKHAOS thanks! I actually meant to wrap my interior orange the first time, but wanted to have the interior and exterior wrapped orange during the summer

[@rohandemoore5083]

sweet as job mate, really diggin the colour

[@soup.p]

I wrapped mine but had trouble getting it to smooth out around the sides and edges of the trims! 😏

[@davidboerst4789]

great job. i just tried and couldn't do it. i would always get creases when dealing with curved areas

[@trnrbryn90]

Wow. Very nice. Thanks for the share.

[@jeflui]

Welcome

[@djhodgson7794]

You should find a way to warp the mitsubishi logo on your steering wheel ! Would be awsome. Great video!

[@jeflui]

Karrezma I have a vinyl cutter that can cut exact size for all the emblems on the car, which I didn’t show on any video. Honestly, I did have it orange for a week but I preferred to leave the Mitsubishi emblems alone.

[@vickielew9540]

Was it hard to remove the vinyl wrapping? I want to wrap my car but if I do end up selling down the track, can I easily remove the wrapping so that the parts are back to their original condition (no marks etc.)?

[@jeflui]

it was not difficult at all removing the vinyl wrap on the interior. for the exterior, there is always a risk of it taking paint off with the vinyl. but i recently took off some wrap from my trunk, and it took some time, but the paint was flawless. after being in the sun for 3+ years, the only problem was the vinyl kept breaking off in small pieces and there was adhesive left, but easy to wipe off with goo gone.

[@mackenzieprovidenti8251]

how did you wrap the lining above the steering wheel for the speedometer??? that’s the only one that keeps unwrapping for me

[@jeflui]

Very carefully and slowly. And with adhesion promoter by 3m so the vinyl sticks better.

[@dave4744]

Nice video mate. How long is the longest part? I want to order some vinyl and it's 151cm long.

[@jeflui]

Davide Bott I’m not really sure to be honest. I bought a large roll to wrap both my interior and exterior, so I never really took measurements.

[@sherlyslife8729]

Also what kind of heat gun do u recommend??

[@jeflui]

i just used the cheapest heat gun available at home depot or lowes and used the lowest heat setting. or a blow dryer that gets decently hot

[@sherlyslife8729]

Jef Lui thank you!!💯

[@daanzho_2446]

Where did you get the wrap from bro ???

[@jeflui]

I get all my vinyl wrap from vvivid vinyl

[@razelglorioso7031]

I tried wrapping the one on the cluster but as soon as i put them back, after a couple of days it start peeling off. Any advice bro?

[@jeflui]

Lezar Glorious I would try wrapping it again. Don’t forget to post heat it. Heat it thoroughly after wrapping to make sure the vinyl doesn’t start peeling itself. That’s what I do, but I’m not a professional, and just remember it’s not easy for everyone.

[@boraerkara4501]

if you want to remove wrapping, does it damage orginal paint?

[@jeflui]

There's always a risk of damaging the paint. But there's a lot of factors that go into that

[@roxycomardelle4267]

What type of vinyl did you use and where did you order it from?

[@jeflui]

oops. jus saw this, i ordered vvivid vinyl right from their website

[@biggestboss2266]

How big was the roll you used for this?

[@jeflui]

2x5 feet

[@ashleyolivos1901]

How do you wrap the cluster ? Any tips?

[@jeflui]

Be slow and patient.

[@ericleyva2415]

I like it but be nice if u had a word for word on how to do it

[@vroish5942]

do i need a heat gun to make it look good?

[@jeflui]

Vroish a heat gun or a blow dryer that gets decently hot. That way you can post heat the vinyl to make sure it sticks. Also can use heat to easily stretch and conform the vinyl to different shapes and angles.

[@chicodave]

Have you done any mods to your lancer bro

[@jeflui]

Most of what I've done is on my channel

[@chicodave]

Jef Lui Yeah I sussed it out, sorry I meant performance upgrades

[@jeflui]

No. There's not really any performance mods that's worth doing in my opinion.

[@bdboy92701]

how much vinyl did you need ?

[@jeflui]

bdboy92701 I bought a 2ft x 5ft roll of vinyl for this. I had some extra leftover, but it’s good to have some vinyl in case you screw up.

[@abhilashps3059]

How much cost

[@jeflui]

Like $20

[@jjDarell]

I can’t wrap for shit... I can’t do nothing with curves or angles I suck at it xD

[@FEARLEZ0PHANTOM]

How did you get off the bezel pieces off of the steering wheel?

[@jeflui]

FearlezPhantom look behind the wheel and there's holes that have screws in them. One screw per steering wheel control, unscrew then take out the controls. I made a video on how to take everything out on my channel.

[@xxP78xx]

How did you remove the two circles from the instrument cluster?

[@jeflui]

78 pull from the inner part of the circles closest to the center screen.

[@xxP78xx]

Jeff Lui thank you I was scared of breaking it. New subscriber here. 👍🏻