'VIPAZ' SOLID RUBBER TYRES 2.0 are finally here! A MUST-HAVE upgrade for your Infraction 6s

UPDATED VIDEO ON MOUNTING YOUR VIPAZ HERE: • The ULTIMATE guide to ...
Introducing the worlds first WestOz RC - VIPAZ custom solid rubber tyres for the ARRMA Infraction and Limitless.
See latest test run video after 18 packs here: • "TYRE EXPLOSION" 💥💥 In...
The new VIPAZ custom solid tyres have finally arrived guys and in this video, I'll show you how to prep and bond them to a new set of Pro-Line Mach 10 rims. They look absolutely awesome on the truck.
It is HIGHLY recommended to use the Pro-Line Mach 10 rims because they have an excellent surface for the tyres to bond to. If you wish to use another type of 83mm set of rims, be sure they are flat from edge to edge, because the Hoons have a step on the outer edge of the rim.
They can be bonded to the original Hoons rims if preferred, but you must be sure to clean off the old rubber but leave that small amount of original rubber on the outer edge step to keep an even flat surface across the rim for ease of bonding. Use a small grinder or sanding disc to grind the original rubber flat.
Use a high quantity super glue. I recommend Loctite 424 as it has excellent strength at high temps or the standard Loctite superglue also works extremely well.
The Mach 10 only need to have the 2 inner and outer ribs removed for easy installation.
This video also includes 4 highlighted test runs in a row. I chose this truck stop site because it has the roughest bitumen I've ever seen and is a great testing ground for the new tyres, so sit back and enjoy the show.
These tyres are a bit of work to bond, but so well worth it in the end, you won't look back.
Get your VIPAZ here: www.ebay.com.a...
Or here at M2C Racing: m2cracing.net/...
Loctite 424 link:
www.ebay.com.a...
Here is ‪@KevinTalbotTV‬ review on my VIPAZ
• the RC Car upgrade tha...
Cheers guys and thanks so much for your ongoing support throughout this project.
Dave
WestOz RC
#arrma #arrmarc #subscribe #rc #rccar #radiocontrol #rctruck #bmx #infraction

[@richduperbash2966]

This is so awesome Brother Dave 😱!!! Appreciate all the work you put into these. Fantastic idea my friend. Smoking Hoons gets heavy on the wallet. I ordered a set of Mach 10's to run these bad boys. Looking forward to testing them soon 🍻😎💪👊👊

[@WestOzRC]

Thanks so much brother Rich I really appreciate the kind words 😎👊🏼. Can’t wait to see how they run for you bud. I’m trying to save us all from that kick in the wallet 🤣. I’m out right now putting the 18th pack thru her and I still can’t believe how good they are. Cheers bro. 😎👊🏼👌🏼👍🏼

[@richduperbash2966]

@@WestOzRC that's incredible Brother 😱. Seriously looking forward to drifting them soon 🍻

[@jackboutcher68]

Congratulations on Kevin Talbot reviewing your tires. Big guy. He deserve it

[@WestOzRC]

Thanks so my bro. I’m absolutely grateful and honored he’s done that and they ran so well. It’s a dream come true and over 2yrs in the making. Appreciate the comment brother. 😎👊🏼👍🏼

[@richardpichan6916]

Got mine on the way, so excited that these are available now!! I will definitely keep you posted on my gluing and longevity to help you keep track and develop. I'm in Michigan and running a V2 Infraction with the 160amp esc and 1250 motor.

[@WestOzRC]

Hi Richard and thanks so much for your purchase and ongoing support brother. Your tyres have been packed and will be sent today. I’m really looking forward to hearing how they work for you. Just keep them glued and you will love them. 😎👊🏼👍🏼👌🏼🤙🏼

[@mikestravels609]

Where did you order them?

[@WestOzRC]

PM on my FB page WestOz RC brother.

[@MikeStallone]

Love the ingenuity here!

[@WestOzRC]

Thanks Mike appreciate the comment brother. 😎👊🏼👍🏼🤙🏼💪🏼

[@Warby1]

thanks for your time and research into this.

[@WestOzRC]

I appreciate your comment Warby. You’ve been with me all the way thru this mate and I thank you sir. 😎👊🏼

[@kaosr.c]

Awesome mate , these looks the good for sure !

[@WestOzRC]

Haha mate you were fast. Thanks bud appreciate it. They are actually better than I thought they'd be.😎👍

[@kaosr.c]

@@WestOzRC i was waiting for it to drop .... wicked drifting , awesome stuff mate

[@TheWatsabi]

I had been following along on these when you had the old billet chunks and the other wrapped layerd ones. I immediately grabbed a set from your ebay page. I'm stoked to see how they perform.

[@WestOzRC]

Thanks so much for your support Ben. I’ve received your purchase and will send them out tomorrow. Super glue them down as instructed and they will last extremely well. Make sure to check the edges and you’ll be good as gold mate. 😎👊🏼👍🏼🤙🏼

[@SquarebodysandRCs]

I got mine ordered. This is going to be awesome.

[@WestOzRC]

Thanks so much brother. I have them packed up already and gonna ship them out on Monday. They absolutely will be awesome. 😎👊🏼👍🏼💪🏼🤙🏼

[@silverssonyoutube8438]

You probably need high temp superglue . There's a place in QLD that sells it

[@WestOzRC]

I just use normal Loctite superglue. Found that to be the best after this video mate. Thanks for the comment bud. Appreciate it. 😎👍🏼

[@linzitazim]

Good job. The sliding way , you could do exactly what you're doing but push the tyre offthe other side about 20/30mm and glue inside tyre again, then slide it back into position. Might help stick both sides. If the glue doesn't set too quick you could actually apply more to both sides. They look like they're holding up great.

[@WestOzRC]

I’ve thought of that way too but they dry super fast. I really like the cut way as the glue really holds them down. The slide does work, you just have to touch up glue around the edges. 😎👍🏼

[@ericsimmons3609]

It would be nice if the company would judt offer the wheels and tires ready to use instead of having to glue them evefytime

[@WestOzRC]

Thanks for the comment. I’m not a company and the manufacturer of the tyres and only a rubber company. I’m just an RC’er like yourself that came up with this idea and product to help us all get longer life out of tyres. I do understand that the gluing is a bit of a task but well worth the effort. Thanks for the view and comment bro. 🤜🏼🤛🏼

[@jeepmanxj]

How do you find the grip on these tires, it looks to be a super hard compound. Also those are digital calipers. Verniers are calipers with a vernier scale.

[@WestOzRC]

Grip is perfect for drifting as that’s the way I designed them. People love them all round the world and they work just great. Thanks for the correction 😎👍🏼

[@jeepmanxj]

@@WestOzRC They have come highly recommended to me. They are on my short list. I do more grip driving but these look to be the prime choice if I don't want to burn 70 bucks a day.

[@WestOzRC]

@@jeepmanxjawesome bro. You’ll love them for drifting and they’ll save you a ton of money. Grab them from M2C of search VIPAZ on ebay. 😎🤜🏼🤛🏼

[@jeepmanxj]

@@WestOzRC Thanks. I'm glad you are out here engaging with your customers.

[@rccambi]

Super video and great idea 👍🏻👍🏻

[@WestOzRC]

Thanks bro much appreciated 😎👊🏼

[@abedboudjema6132]

Hi i think i just bought the last pair of tires. Are you going to continue producing the vipaz ?

[@WestOzRC]

Hi mate and thanks for your purchase. Yes the next batch of VIPAZ will be up this weekend. Thanks again and I hope you enjoy them.

[@IDORC]

Great vid mate, these should sell like hot cakes, nice work

[@WestOzRC]

Thanks mate. Hope so, not making any profit on them 😬.

[@KC_2112]

Great idea but $125+ for 4 pieces of rubber without the wheels is a little on the steep side. I understand they last several packs but it’s to much. If they came pre-mounted on wheels I would say good deal and worth it for sure. Great job though definitely.

[@WestOzRC]

Thanks bro appreciate the comment. I had to get a mold made for them and only had 13 sets made to see how they sell and I’m selling them with no profit at all. If I can get them made cheaper down the track I will certainly be passing on the saving. Also, you are meant to use your used Hoons rims so no rims are needed. I just wanted to show how they fit on the Mach 10 rims. Thanks again bud. 😎👊🏼👍🏼🤙🏼

[@charliemaybe]

@@WestOzRC how many packs can you get out of like a white hoon vs your tires becasue a full set of hoons for me is around 70 dollars mounted on rims, how long does your tires last and what is the grip comparable to the hoon tires. I live in a bit of a colder climate than australia, so im wondering what these solid rubber tires can handle when running in something as cold as -5 c to around 5 c. I wouldnt want to spend that kind of cash then find out that it feels like im driving on ice becasue the rubber is super hard. So, are these solid tires more of a drift and burnout tire, or an all around tire like the hoons are

[@WestOzRC]

@@charliemaybe hey bro. Well I use to get around 3-4 packs with white Hoons but the VIPAZ are a harder compound (around 70 duro, Hoons are around 60 duro) and they do drift easier due to this. Because all 4 tyres are the same the truck reacts pretty much the same. I have sold quite a few sets to people in Sweden, Norway and Finland and they love them and they are repeat buyers too. I have gotten 18 packs on the test sets but I ran them as hard as I could. I’ve had some customers get 30 packs. I have priced them as best as I could and I’ve been told they are worth their weight in gold with the money people have saved. The only way you will know is to try a set. They cost around the same as a set of Hoons. Be sure to glue them as instructed and you will love them. Cheers bro and thanks for your time to comment and interest. 😎👊🏼

[@charliemaybe]

@@WestOzRC ive done some math, and the price definatly isnt actually that bad, i can get a set of hoons for around 70ish usd while your tires I can get for around 80-90 usd, so if they last that long and I can absolutely rip on them, that isnt that bad.

[@naushadadam9302]

Awesome video. Any Tyres for the infraction 3s BLX? Plus how can I get it, I’m in South Africa?

[@WestOzRC]

The 3s line are in progress and will have them towards the end of this year hopefully once the mold has been made.

[@redondobeachrc3112]

This is awesome!!

[@WestOzRC]

Thanks brother appreciate it heaps. 😎👊🏼👍🏼💪🏼👌🏼

[@SquarebodysandRCs]

I feel like your estimate of 4-5 times more runs than hoons is very conservative. I get 2 packs max out of hoons. With the minimal wear you have after 4 packs, and if you rotate them every couple of packs. They should far exceed your estimate. These tires may seem expensive, but are actually relatively cheap compared to the big pile of worn out hoons I have.

[@WestOzRC]

Well said brother and I really appreciate your comment. I’m actually going to rotate them every 4 packs and see how much more I get. I underestimate deliberately because the last thing I wanted was people calling me out if I said they’ll last 25 packs and they only get 20 lol. I honestly think they are priced accordingly to their wear worth but I am working hard to see if I can get them made cheaper for us all. 😎👊🏼👍🏼👌🏼🤙🏼

[@kansascityrc]

Those seem way more durable than hoons. The main reason I haven't gotten one of these awesome trucks is because of how much they go through tires. Might just have to get me one now! Great video man 😎🤙

[@WestOzRC]

Hey brother thanks so much for your comment. They are performing very well and even after the 4 packs I put her thru they only wore down 1mm. I’m going to put another 4 packs thru her tomorrow and see how much is left again. Even after 4 packs on the surface I ran it on, I would have already been changing them because I have already done so in the past. I think it’s time for you to spoil yourself on one of these majestic beasts with these tyres and enjoy some insane drift moments. Cheers brother. 😎👊🏼👍🏼🤙🏼👌🏼

[@ericsimmons3609]

Here's my thing once u glue then and they wear down ur buying wheels and tires again that can get costly too

[@allthingsmotorized1885]

saw this vid 25 mins after release (same person who said this on arrma forum) and ive been following since the start so ive been desperate and ordered a set straight away, i run on a concrete skid pan so its pretty smooth, silver hoons last me about 5 packs but cost £70 pounds (for 4) so if i can get 15 packs out of these ive saved £70 already!

[@WestOzRC]

Hey brother. Thanks so much for your ongoing support I really appreciate your comment. I’m absolutely confident that these are going to be perfect for you. I really want to hear how long they last once you get them on. Thanks again mate, you’ve made me feel like it was all worth it. 😎👊🏼👍🏼💪🏼👌🏼

[@allthingsmotorized1885]

@@WestOzRC will keep you posted on the wear mate, really looking forward to seeing how they hold up! 👍

[@WestOzRC]

@@allthingsmotorized1885 glue them well and they will serve you well brother. 👊🏼

[@minouverjini8783]

Hi the proline mach 10 rims are DISCONTINUED. Do you recommend something else

[@WestOzRC]

Yes they are but there are a few on eBay still available. Otherwise you can try the HPI V7 or the Arrma Typhon rims work also.

[@MrScby11195]

I think these things would last a long time for me because they just re paved my road and it’s smooth even the hoons have lasted me a while

[@WestOzRC]

Hey bro yeah for sure. One of my customers has had over 30 packs got thru them and they still have at least 10 more to go. 😎👍🏼

[@ciarancdc]

Wish I could buy a set right now but I'll have to wait a while for the funds to build up

[@WestOzRC]

No worries brother, completely understand. They’ll be here when you’re ready. 😎👊🏼👍🏼🤙🏼

[@alankowalski8781]

That’s awesome man. If your going to start selling these or something, I need them from the the 6s infraction. I really need the size of the felony rears, not sure what your planning on making?

[@WestOzRC]

Hi Alan and thanks for your interest mate. To make them for the rear Felony tyres I would have to get another mold made and I’m not in a financial position just yet to get those made but I will definitely be looking at those in the future. 😎👊🏼👍🏼

[@cbelements8348]

So tire glue or super glue? I have been saving my hoons to use them. Hopefully I can just slide them over the hoons?

[@WestOzRC]

I used super glue which I’m sure is what they use in tyre glue. Yep either apply the glue to the rim first then slide the rim down then touch up glue if around the edges or cut the tyre on an angle and apply the glue to the rim 2” at a time, lay rim flat and work the rubber around until they meet and glue them together again. Either method works well. For the Hoons, you have to leave that tiny bit of rubber step down on the outside of the rim they have so you can glue the e edge down. That’s why I like the Mach 10 rims because they a even flat across the surface. 😎👊🏼👌🏼💪🏼

[@nicholasnelson1473]

When will you have more in stock? I would like to purchase a set. That looks awesome!!!

[@WestOzRC]

Not long brother. Few more weeks to go. Stay tuned and I’ll have them up here, FB and the Arrma Forum. 😎👊🏼

[@CoreyRickit]

Hey! When will more become available?

[@WestOzRC]

Hey bro. Not until early next year when life gets back on track for me. Stay tuned my friend. 🤜🏼🤛🏼

[@andruhanovo6583]

Definitely interested ​@@WestOzRC

[@WestOzRC]

@andruhanovo6583 thank you bro.

[@MJ-gq9nv]

Tooth picks with warm rubber as to aid stretch and then just remove picks 6of them should definitely do

[@WestOzRC]

That is definitely a fantastic idea brother. I’m going to use a needle bottle with the superglue poured into it as this method was used by one of the guys that purchased them and worked really well too. 😎👊🏼

[@WhiteoutSnowy]

You are running 3s battery right ? Which runs cooler using 6S or 3S batteries ? Tires looks great too , the stock ones you get would be lucky to last 2 full charges eh ?

[@WestOzRC]

Yeah bro they a 3s each. I prefer it that way because if you get to a dead cell it cheaper to change 1 3s than a 6s pack. Thanks for the comment bud and yeh I use to get 3 packs out of a set of Hoons. Now they last at least 20 packs with the Vipaz.

[@codnamerich]

Fantastic video! The investment of wheels and tires is the one thing that has deterred me from getting an infraction. Your solution might have me buying one soon! Once they wear down to a certain point will you strip the tires and re use the wheels?

[@WestOzRC]

Thanks for that comment brother it’s really appreciated. You would not be disappointed if you buy one especially with these tyres. Yes 100% I will wear these down to almost the rims then grind off the remaining rubber and glue another set on, or at $40-$50 a set of Mach 10 or any other 83mm rim I might just buy those and start from scratch. Either method will work.

[@MrSpeeder420]

Will b grabbing a set next week! Id really like to see a 53/107 set. Will b testing well over 60mph. Going to try a syringe for refilling ink cartridges to get the glue in between the rubber and wheel while the tire is in place. So no cutting is required, netting a tire that should be capable of 100+mph.

[@WestOzRC]

Cool man. The mold of these already cost me a bit so the 53/107 will have to wait until I see how these sell then I will look into it. You can get super glue with a long pin type tubing at the end of the bottle that would probably work well. You could even try sliding them on then peel back the edges and squeeze the glue inside. As for the ones I have, they are holding really well. Gonna go do another run next weekend. 😎👊🏼👍🏼

[@MrSpeeder420]

@@WestOzRC i can imagine. im a machinist, so i know the cost of tooling. Great suggestions for glue techniques 👍 will also b checking the balance of them. Should be interesting .

[@WestOzRC]

@@MrSpeeder420 oh sweet mate. They seem perfectly balanced which you’d expect them to be because they come from a machined mold but you can never be too sure I guess. 👍🏼

[@S4MICHURC]

gdzie kupic takie opony ?

[@TheJs12347777]

perhaps drill a series of small holes around the inside of rim and somehow inject glue underneath the tyre to glue

[@WestOzRC]

Thanks for your idea bro and I also thought of that too. By drilling holes in the rim you loose the integrity of the rim and weaken it because while the heavier tyre spins, it wants to tear off the rim so removing surface area for it to bond to is not a good idea. I’ve put a lot of thought into these and also the manufacturer. I’ll have a new video out this weekend on another 4 packs thru the truck. 😎👊🏼👍🏼💪🏼👌🏼

[@bigboyztoyz6981]

They say not for sale on eBay ….I run 2 infractions tires are taking away my retirement 😂 please lmk how I can purchase ….a set already glued would be sweet ! Ty ! Awesome work !!

[@WestOzRC]

They will be back on eBay once restocked bro. Haha I completely understand retirement depletion 🤣. I don’t sell them preglued so best check out my latest “How To” video on how to prepare after market and Hoons rims. Thanks for the kind words brother. 😎👊🏼🤙🏼

[@chousky1234]

Tires are sold out on eBay. Do y’all have another website where to find them?

[@WestOzRC]

Yeah bro they sold out in 6 days. M2C racing will have there next batch early next week and I’m have my new batch in about 2 weeks. Thanks for your interest brother. 😎👊🏼

[@wynwyn1941]

You have good option so when are you going to sell them

[@WestOzRC]

Thanks for your comment. I’ve been selling them for over 2 yrs now worldwide. You can get them at m2cracing.com as they are my US distributors. Search VIPAZ on their website. Cheers man. 🤜🏼🤛🏼👍🏼

[@dirtfamilystyle]

Where did you get the rubber from..?

[@WestOzRC]

Hey bro thanks for your time to comment. I paid a manufacturer to produce a mold and had a heap made that are now sold out but I should have stock back in a few weeks.

[@bigboyztoyz6981]

Can I purchase a set from you! I love these !

[@WestOzRC]

You sure can brother. I’m out of stock atm but will have more in a week or two. PM me on FB messenger at WestOz RC. Cheers bro 😎👊🏼👌🏼🤙🏼

[@orangemound135]

Just checked out the link...I don't like gluing...can you get them with rims glued??

[@WestOzRC]

It’s pretty easy to do bud. You use your old Hoons rims or buy any type of 83mm rims.

[@dklien6443]

Will you ship to the U.S.? Awesome idea and well executed

[@WestOzRC]

I sure do brother. Sent 3 already to the US and one to the UK. 😎👊🏼👍🏼🤙🏼

[@orangemound135]

Do they come preglued or do we have to glue them ourselves... But awesome demo of the tires 👏 👌 😀

[@WestOzRC]

Thanks brother. Yeh you use your original Hoons rims and glue these onto them once you’ve prepped them. Or you can buy the Mach 10 rims and do as I did. They look awesome.

[@creaturerc]

Where do I buy them? They aren't on eBay anymore

[@WestOzRC]

I’ll have them up again this Saturday or M2C Racing is also selling as my distributor. Cheers bro 😎👍🏼

[@creaturerc]

@@WestOzRC awesome thanks man

[@WestOzRC]

They’re back up on eBay bud. 😎👊🏼👍🏼

[@AphexTwinII]

How long are those packs lasting you each run?

[@WestOzRC]

The 8000 last around 10min and 6500 around 7min but that’s full trigger the whole time. I can get an extra 2-3min if I easy off.

[@misshelby1]

Hey mate how can I buy some !! Awesome

[@WestOzRC]

Hey mate. They will be available soon. Just awaiting shipment which won’t be far away. I’ll post here and FB once I have them. Stay tuned mate and thanks heaps for the sub. 😎👊🏼

[@misshelby1]

@@WestOzRC awesome mate appreciate it im definitely getting a set thanks

[@GrafRC]

Its for drifting.?

[@WestOzRC]

Yep absolutely 👍🏼

[@Krideezy]

Not up for sale anymo?

[@WestOzRC]

They will be soon again bro. Hang tight. 😎👍🏼👊🏼

[@Krideezy]

@@WestOzRC thanks mate, boutta order an infraction

[@WestOzRC]

@@Krideezy Oohh nice mate. You will not regret it especially once you get these tyres on.

[@based_will]

@@WestOzRChey just picking up an infraction today, do you have a date on when the tires will be for sale?

[@WestOzRC]

@@based_will nice man congrats. I’ll have my next batch up this weekend bro or if you’re in the US, M2C Racing is now my distributor there. 😎👍🏼👊🏼

[@jnlc-rc26]

Au top ! 👍

[@WestOzRC]

😎👊🏼👍🏼🤙🏼

[@isaackshirley4695]

Can I buy a set

[@WestOzRC]

You sure can bro. I’ll have them back on eBay this weekend and I’ll pop the new link in the description.

[@isaackshirley4695]

Ty

[@mikedee7163]

With the hoon tires I just soak them in black magic Make sure I only go to spots that have been seal coated and aren't just raw pavement And try going after it rained and the pavement is just slightly wet Those three things have tripled the life of my boom tires Unfortunately it doesn't matter what tires you use The infraction just eats through anything you put on I only take out mine out occasionally for that reason After the 6th -8th set of tires it starts to feel like you're just throwing money out the window

[@WestOzRC]

Great idea man but with these solid rubber tyres just keep running and running. I’ve put 8 packs thru them and they have only worn 2mm. You can’t beat these solid rubbers tyres bud they are lasting so well and I’m not restricted to any surface. I totally agree with the wet surface man but I try to keep water out of it. Thanks heaps for taking the time to comment, it’s much appreciated brother.

[@subzerolives]

@@WestOzRC I'm going to follow this journey, 53/107 is needed I wish you much success

[@WestOzRC]

Thanks so much Peter I really appreciate your support and comment brother. 😎👊🏼🙏

[@alterdcustomrc4512]

Maybe put the wheels in the freezer and add glue to the tires and warm them a little. Should work without cuting

[@WestOzRC]

Hmmm interesting concept bro I could give that a go for sure. Thing is tho if the tyres are warm the glue will dry super fast. That’s why they glue so quickly when they are hot from running. You only have to wait like 2min and you can rip again. Another way is to slide them onto the rim without the glue then place a screwdriver between the rim and tyre to space them apart then squeeze the glue down the rim or tyre then move around the rim like that.

[@alterdcustomrc4512]

@@WestOzRC maybe toothpicks. And a needle pen applicator. It would defiantly dry the glue faster if the tire’s were warm

[@WestOzRC]

@@alterdcustomrc4512 oooo you wouldn’t want the toothpicks to get glued 🤣. Imagine that 🤣🤣

[@alterdcustomrc4512]

@@WestOzRC hahaha. When i glued fishing wire to my 1/10 tires it was enough to make me never do i again haha. Everything stuck and stank. It was a mess. Please keep sharing. This is freaking awesome and i love how they are holding up

[@WestOzRC]

@@alterdcustomrc4512 hahaha that stuff is damn messy for sure. Thanks heaps mate I really appreciate that. 😎👊🏼👍🏼

[@KurtsRCs]

Those tires look like they will last for a long time

[@WestOzRC]

They absolutely will bud. Grab a set and give them a go. 😎👊🏼👍🏼🤙🏼

[@Utubeisazzho]

Heat and shrink

[@WANAKO503es]

Nice but no grip

[@WestOzRC]

Thanks man. There’s enough grip for drifting and that’s all they’ve been made for. Have you used them at all?

[@PigglyWigglyDeluxe]

I know you’re not making any profit here and I LOVE this idea but I can’t spent $130 on rubber. That’s half the price of real tires for my real car.

[@WestOzRC]

I appreciate that bro but it’s gonna cost you a lot more in Hoons. Just an FYI I spent $390 on a full set of Trenchers with zero offset alloy hubs for my Mojo and I don’t regret it for 1 sec 😎👊🏼👍🏼💪🏼👌🏼

[@PigglyWigglyDeluxe]

@@WestOzRC yeah you’re not wrong. What makes me a bit weary though is if you stop making them, I’m back to the same problem. I don’t drive my infraction very much for this specific reason. Tires.

[@WestOzRC]

@@PigglyWigglyDeluxe I completely understand your concern bud and all I can say is that I’m in it for the long haul. I’m also looking at another manufacturer to see if I can get them cheaper. They outlast any tyre on the market now about 4-5 times and that will save you around $500. Thanks again for your feedback brother 😎👊🏼👍🏼👌🏼🤙🏼

[@BrothrBob]

I don't agree with cutting the tires.

[@WestOzRC]

Thanks for your comment and it is just a suggestion. I didn’t want to take that route but I wanted to try 2 styles of bonding. I’ve had success with both gluing methods and the cut ones are still holding on. I just ran another 4 packs thru the truck today and they are still holding well. Video will be up this weekend. Cheers man. 😎👊🏼👍🏼🤙🏼