How to Replace Headlight Bulbs - Hyundai Elantra (2017-2018)

[@VirarAutomotive]

Low Beam Bulb : 9005 High Beam Bulb : H7 Purchase the bulbs for your vehicle here. auxito.com/?ref=VirarAutomotive Use the promo code for a 12% Discount. 'VIRARAUTO' Bulb Replacement guide: www.sylvania-automotive.com/bulb-finder.html Bulb Type Cross Reference Guide: www.vleds.com/cross-reference-guide

[@SqueegeeSquanch]

Thank you for taking the time to carefully explain each and every step. When you're a novice at working on cars, videos like this are so incredibly helpful!

[@VirarAutomotive]

You are very welcome. Glad you like it. The whole idea with this channel is to inspire confidence in car owners to do basic stuff themselves without having to depend on anyone. Be sure to check out the other videos made for the 2017-2018 Hyundai Elantra.

[@petschy9]

Yeah my man’s here knows how to take it slowly step by step !

[@almartin78]

Thank you!!! My bulb went out tonight, and I don't want spend a fortune having someone else replace this. Thank you for explaining this!

[@VirarAutomotive]

Glad I could help!

[@henryk2689]

This has to be one of the most comprehensive videos for replacing a headlight bulb especially in the Elantra. Thank you

[@VirarAutomotive]

Thank you Henry for your kind words. Glad you found it helpful Sir!

[@srizzio]

I followed your directions and it worked. You saved me a trip to a service station on a weekend, when my time is really valuable. Thanks a million!!!

[@VirarAutomotive]

You are welcome Sam. Glad to hear that you found it useful.

[@ramanv2753]

So well explained and easy to follow. This will definitely save at least $50 for a lot of people

[@VirarAutomotive]

Thank you for the kind words!

[@ladyl7660]

Saved me $200... I drive Uber so I was constantly being ripped off

[@ladyl7660]

This was so helpful. The place I was taking it to charged $200 and lied and said they had to remove the bumper to do it. Thank you so much

[@VirarAutomotive]

Thank you for your kind words. So glad to hear that you found the video helpful! Now you will be able to change the bulbs yourself in less than 10 minutes for a fraction of the price they quoted you.

[@athenawatts8824]

This was a BEAUTIFUL video! I replaced my bulb AT the auto parts place in MINUTES!!! Thank you!

[@VirarAutomotive]

That's so awesome! Thank you for your kind words!

[@roanokejoe]

Yeah, you make it look so easy but how to do the low beam if the cap is STUCK?

[@VirarAutomotive]

Just wiggle the cap a few times (left-right-left-right), may take a minute or two but eventually it will come loose. To make it easier on your hands use a towel to do so.

[@Aden123]

I used pliers it was stuck hard ngl

[@boxychubbo6922]

Pry it loose with a flathead. No prob.

[@jimarmstrong1865]

Thank you my low beam thing is stuck like a mofo 2 tech at auto zone had no luck so here I am trying

[@michaelodommediaproduction810]

Wd40 🫣

[@felipepan71]

Wow. This how to do video is the best one I’ve ever seen really. Nice video man thank you

[@VirarAutomotive]

Glad you like it! Be sure to check out the other videos made specifically for the 2017-2018 Hyundai Elantra: kzbin.info/aero/PLFtKj3oFrQPPPbwWkvuxXsqWDD4WYxfXx

[@yemxgrunt7327]

Best video on KZbin. Very detailed and informative

[@VirarAutomotive]

You’re welcome! Glad I could help!

[@SgtFrankBatman]

Thank you for the in depth explanation. I'm very new to fixing my own car and this made it so much less stressful

[@VirarAutomotive]

Glad I could help!

[@MistahWarner]

Thank you sir! You’re my hero today! Amazing directions and communication. Have a great week

[@VirarAutomotive]

Thank you for your kind words! Glad to hear that you found the video helpful! Have a nice week as well! 😊👍

[@ljprep6250]

I had a friend ask me how to change the bulbs in his 2017 Elantra. I wasn't sure for the new cars (retired as a mechanic in 1985 with a back problem) so I used my KZbinFu to find you. As we talked, I found your vid online and sent it to him. He'll try it himself instead of letting a mechanic charge him a lot for it. // On my 2007 Tundra, I had to move the battery 2" backward for the driver side high beam. and move the washer tank to get the passenger side done. Only took half an hour, but a PITA.

[@VirarAutomotive]

Glad to hear that you found this video helpful enough to share with your friend. It really isn't that hard to change the headlight bulbs on this Elantra. But I know what you mean, some of the cars serviceability who practically ignored of when they designed them. 😊

[@julietb5678]

Thank you for the way to follow video. This is my first Hyundai with separate high and low beam bulbs and it helps to get a quick walkthrough before changing one of them for the first time.

[@VirarAutomotive]

Great to hear!

[@LisaYambo]

Thank you. I’m gonna try this on my car. I’ve been asking my husband for over a week to do it but not waiting around anymore. Thanks!

[@VirarAutomotive]

More power to you! You go Girl! Good luck 🤞

[@akashdeepsingh4234]

Exactly what i was looking for. You got my subscription for perfect explanation

[@VirarAutomotive]

Glad I could help!

[@SanthoshKumar-ye3sh]

Can i replace the halogen with 9005 HB3 LED Headlight. Will it fit in to it..

[@VirarAutomotive]

Ofcourse you can replace the low beam lights 9005 Halogens with 9005 LED. If you want to replace the high beams as well please ensure it's the right size as mentioned in the video description as the low beam and high beam lights are different. Also check the description for the link to buy the bulbs and for the discount code..

[@SanthoshKumar-ye3sh]

@@VirarAutomotive Thanks for the prompt response.

[@merttekkin5531]

Thank you so much brother. I just changed my passenger side low beams. Im writing this comment in front of the autozone. Just wanted to say thanks immedately. 😂😂

[@VirarAutomotive]

Glad I could help :)

[@dorothysheehan7409]

Any tips on unscrewing the low beam cover? The cover on my driver side is so so tight.

[@VirarAutomotive]

The only real tip is to use a rag or towel to grip the cover and undo it. I remember when I did the first time, I thought I was going to break something, because it just wouldn't come off and it was hard on my palm. I then grabbed a towel and used that to twist it and eventually it came off. It's not the most accessible place and the moisture that's there doesn't make it easy either.

[@onexsp1492]

Nice video, very well explained, im having trouble trying to remove driver side cap since it is really tight. ( I could remove the passenger side, I was able to use 2 hands) is there any tools or something I can use to remove the cap of driver side? Thanks

[@VirarAutomotive]

Unfortunately I don't know of any specific tools you could use for this job. Putting a towel on the cap and forcing the cap, left, right, left, right for a few minutes should make it easier to come off and be easier on your hands as well.

[@hmata3]

I used a small flat head screwdriver and small hammer. With some light taps, it was off in less than five seconds

[@Seánasadventure]

Omg thank you for leaving this comment

[@kingcarter3971]

Thank you my guy amazing vid I just changed my headlight in the auto zone parking lot in less than 10 min cause of you 🙏🏾 🙏🏾🙏🏾🙏🏾

[@VirarAutomotive]

Thank you! Glad you found it useful!

[@safasaffo404]

Hello Dear : Many thanks for your explanation, kindly could you help to let me know which type of holder adapter should i use in Elantra 2017 to replace the halogen bulb by h7 led bulb for low beam.

[@VirarAutomotive]

Hello. I am not sure what type of adapter would work for it. However if you are trying to upgrade your headlight bulbs to LED bulbs. Try out these ones. I had installed them and they installed perfectly, direct replacement for the factory halogen bulbs. www.amazon.com/gp/product/B07G9WTHTN/

[@Butler_Buck]

Good video. It took less than 5 minutes to make the change. I did use a flathead screwdriver to help pop the cover off instead of a key.

[@VirarAutomotive]

Glad to hear that!

[@jefflaux8935]

Wow, thank you so much for each detailed step. I never would have figured out a couple of those steps on my own.

[@VirarAutomotive]

Glad it was helpful!

[@Grayback1973]

Excellent tutorial, thank you! If you are doing the driver side low beam that is the hardest one because of the box directly behind the headlamp. If you have small hands it might be easier but I have big hands and it was not easy!

[@VirarAutomotive]

Yes you are correct. I was able to do it since I have smaller hands and I was only able to get my hand in there, it wasn't possible to get the camera in there and my hand in there at the same time.

[@thomases1609]

My experience too. I'm glad I bought two bulbs since I broke one trying to work in that tight space.

[@davebuskirk1758]

@@thomases1609 yikes!

[@jon1410]

@@davebuskirk1758 the plastic notches on the cap broke trying to turn mine. Thats how tight it is.

[@debbiesparks471]

I've been trying to get my driver side low beam bulb changed for several days and no one has been able to do it. I'm really dreading taking it to the dealer. They take all day even if you have an appointment. I'm going to get my husband to watch this, he's already tried it once.

[@esrpap]

Thank you, this was incredibly helpful for a guy who isn't mechanical minded!

[@VirarAutomotive]

Glad you found it useful!

[@CW-yj8ce]

Thank you for the detailed instructions, I just changed both low beam bulbs!!! To hopefully help clarify, when twisting the cover off the low beam, turn it to driver side or away from passenger side. turning "left" made me wonder if I was suppose to face the car because cover won't budge for a few minutes.

[@VirarAutomotive]

Thank you for sharing. When I make my other videos I will try to keep that in mind when mentioning directions.

[@tejasigadkari4701]

This channel is a one stop shop for auto noobs like me! You have a knack for keeping explainations simple. Great going 👍

[@VirarAutomotive]

Thank you for your kind words. Glad you found it useful! 👍😀

[@SwaggykeA]

Hello, I’m trying to see how aftermarket RGB high beam would work I tried to fit the H7 kit in but the housing just slide . Any idea?

[@VirarAutomotive]

Sorry no idea about the aftermarket RGB kit. Haven't tried that out.

[@Fdm-pw8zr]

Any suggestions if your cap is literally so stuck and will not twist?

[@VirarAutomotive]

Apply alternating force, left --> right --> left ---> right, and keep at it for a few minutes, it should come off eventually. I know it sounds like a hassle but unfortunately sometimes it just gets stuck.

[@takamynei]

Hello sir, thank you for your video! Do you have a video or know if its possiblr to replace de DLR led strip?

[@VirarAutomotive]

Hello. It is possible to replace the entire DRL Led strip. Unfortunately I don't have a video for that with me and I don't have this car anymore to be able to make a video on how to do it.

[@takamynei]

@@VirarAutomotive I see, thanks for your reply!

[@asiacarr6998]

Thank you so much for taking the time to explain step by step Virar. Virar, what kind of bulbs should I get for the low beam headlight specifically?

[@VirarAutomotive]

You can get 9005 Replacement bulb for the low beams. Or if you would like to upgrade to LED bulbs you can buy them using this link. If you use the discount code: VIRARAUTO, you also get a 12% discount. Find and purchase the bulbs for your vehicle here. auxito.com/?ref=VirarAutomotive Use the promo code for a 12% Discount. 'VIRARAUTO'

[@asiacarr6998]

Thank you!

[@rebeccalien259]

Your the best video I have seen! Please do as many different parts for this car as possible

[@VirarAutomotive]

Thank you very much for your kind words. Do check out and bookmark my playlist that has all the videos I made just for the 2017-2018 Hyundai Elantra : Hyundai Elantra (2017-2018): kzbin.info/aero/PLFtKj3oFrQPPPbwWkvuxXsqWDD4WYxfXx

[@19D1a]

Thank you helped me out a lot this morning when I had to get this done in a hurry. I appreciate the video.

[@VirarAutomotive]

Thank you for sharing. Glad to hear that you found the video helpful!

[@justincook9834]

I can’t do anything with cars, simple things like this are hard for me. Thank you so much!

[@VirarAutomotive]

You can do it! Glad to hear that you found the video helpful!

[@johnmorganti5446]

Great video. Nice and slow. I used it to change my turn signal bulb. Done in 5 min. Thank u!

[@VirarAutomotive]

Glad it helped

[@sudharsanashokan5214]

Hi sir I'm from India is it actually 9500 for low beam mine is 2017 elantra I'm planning to upgrade from factory fitted HID to led

[@VirarAutomotive]

Hello Sudharsan, If you have the HID then it's a different bulb. 9005 is what you have if you have the Halogen low beam bulb Low Beam Bulb : 9005 High Beam Bulb : H7

[@ronyjose100]

low beam also h7 as well ? i am looking for a led so any suggestion

[@VirarAutomotive]

Low beam is 9005 Bulb. Check out this link for LED light bulbs. www.amazon.com/gp/product/B07G9WTHTN

[@joehaworth1816]

Thank you so much for your video. It showed me how to do it on my own and save $150 from a mobile mechanic coming. You have a new subscriber :-)

[@VirarAutomotive]

Glad it was helpful! Thank you for your kind words!

[@biscuitnbunny]

Can you show a video where's is the front parking lamp bulb position? (the small mini bulb below the high beam) I can't find it.. Thanks

[@VirarAutomotive]

Here you go. kzbin.info/www/bejne/jHmok4Ksh9WKfqM

[@VirarAutomotive]

I made a video just for it for the 2017-2018 Hyundai Elantra

[@biscuitnbunny]

@@VirarAutomotive mine was between the high beam and the low beam for the parking light instead of at the side. Is it because I had a 1.6 where else yours is a 2.0 engine? Thanks for the info, indeed very helpful

[@VirarAutomotive]

Engine Size difference should not make that difference, country of production would. Regulations differ from country to country and that may result in certain lights being placed in different positions. May I ask which country is your car manufactured for ?

[@biscuitnbunny]

@@VirarAutomotive is manufactured and sold in Singapore. So far I had found all bulb location as shown in your video except for that parking light position which I could not found and search through the whole internet to no valid...

[@SkankHunt-ub5et]

Does 2019 Hyundai Elantra SEL use H7 as high beams and 9005 as low beams as well?

[@VirarAutomotive]

The 2019 Hyundai Elantra SEL uses 9005 for both high beam and low beam

[@luisrangel6696]

@@VirarAutomotive i would be able to do the same steps in this video for a 2019 Hyundai Elantra sel?

[@VirarAutomotive]

Not sure. The 2019 Hyundai Elantra has redesigned headlights and I am not sure which bulbs they use.

[@tubab88]

This was great! Easy to follow along and super clear instructions! Thank you!

[@VirarAutomotive]

You are very welcome!

[@petschy9]

Bro perfect directions my man much appreciated!!!

[@VirarAutomotive]

Thank you. Glad I could help. Glad you found it useful!

[@NickDe39]

I added silicone grease to those cap gaskets, protects that rubber O"ring and eases removing that cap. If you don't, that 65 watt bulb will bake on that cap and you will never get it off. You need a good seal, bulb heats the the air inside the assembly and if any leaks our, creates a vacuum that sucks in moisture when it cool down. A wet inside housing sure blocks the light output. Sylvania XtraVision's cost a few cents more and are 30% more brighter and also last a long time, I average about 8-9 years and do a lot of night driving. Carry spare bulbs in the trunk and a flash light just in case. Also carry spares for all running lights such as parking, directional, and license plate. Need a 10 mm nutdriver for the rear tail lamps. That can also use silicone on that front rubber seal to make it easier to pull out. If you replace your lamps with other than what your owners manual calls for, you are accepting the liability and may not even be covered by that other guys insurance company that hit you. Crooks will do anything to avoid a claim.

[@VirarAutomotive]

Comment Pinned. Excellent tips. You sure have done your fair share of driving and being in tricky situations. Those bulbs somehow tend to fail at the worse possible moments. Will use the tip to apply silicone grease on my future videos. Thanks.

[@VirarAutomotive]

Lol. It ain't that bad. worst case you won't be able to get that dust cover off. Plenty of people have watched this video and replaced their bulbs successfully. Give it a try!

[@ljprep6250]

I use SuperLube Synthetic Grease with PTFE. It's a bit less nasty than silicone but provides the same long-lasting slickness you need for apps like this.

[@RedHotArt]

Awesome! I was trying to figure this out myself but felt I might be about to break something. I'm going to go try again now. Thank u!!

[@VirarAutomotive]

I am glad you found it useful! Let me know how it goes! Good luck!

[@rebecaharpster569]

This video is super helpful for my high beam replacement but my low beams are the D5S HID bulbs. Do you have a video or explanation on how to remove these bulbs?

[@alyssak1025]

Exactly what I needed, thank you very much for this. Did it in 20 minutes (cap was reallllllyyyyy tight on mine)!

[@VirarAutomotive]

So glad to hear that you found the video helpful!

[@sno6762]

mine is super tight what should i do?

[@VirarAutomotive]

Twist it left and right. Use a towel to do it so it doesn't hurt your palms.

[@Logansrunn1701]

Do you have a video upgrading 2018 Hyundai Elantra to LED lights? Thank you

[@VirarAutomotive]

I don't have a video to do that. However, the LED kits are plug and play. Bought this for my friend's 2018 Hyundai Elantra and fit just fine. No cutting/splicing. www.amazon.com/dp/B07G9WTHTN

[@alanabear2736]

Please, for everyone else on the road, do not use LED. It blinds us. You can see, but the rest of is can't.

[@zoeblaster]

Thank you awesome detailed video! I've been trying forever to find a video that explains every step.

[@VirarAutomotive]

You are very welcome

[@Lilhoney314]

The first step in my manual says to disconnect the negative connection on the battery. Was that done?

[@VirarAutomotive]

Disconnecting the negative connection on the battery when doing any electrical work is always a good idea. Also that black clip at the base of the bulb you mentioned is an adapter. It is very likely removable.

[@harinderbrar6463]

you are awesome,explain everything perfectly.

[@VirarAutomotive]

Thanks a lot!

[@emmanueljoseph3848]

How to check DRL lights that are not turning on please. Thank you

[@Hisham_Mohammed]

thank you my friend you helped a guy from Medina saudi arabia

[@VirarAutomotive]

Thank you

[@mwcdx]

My 2017 Tucson doesn't have that Black plastic case the bulb is in to twist out? It looks like it is attached to the inside some how. Its very deep inside the hole. I unplugged the harness from the bulb to get a better view and there is no black bulb harness to twist out. Am I going crazy? Can you help me out?

[@VirarAutomotive]

kzbin.info/www/bejne/bIKyk5eMq5WhnqM Watch this video I made for a 2012-2014 Hyundai Sonata. I have no Hyundai Tucson around me to actually go and confirm, but it's possible that your bulbs are held inside the headlight in a similar way like the ones I show in this video. Give it a try. Hopefully you find it helpful!

[@mwcdx]

Thank you so much! I saw that clip holding the bulb down.Subscribed.

[@VirarAutomotive]

Awesome. Hopefully some time in the future I am able to get a Hyundai Tucson to make videos just got your vehicle! 👍😁

[@bashirhesoka]

Best mechanic video i have watched ⭐️⭐️⭐️⭐️⭐️ Thanks

[@VirarAutomotive]

Thank you for your kind words

[@tanray2031]

Can i know how do i replace the Pole light (T10) beside the highbeam light?

[@VirarAutomotive]

Maybe this video should help: kzbin.info/www/bejne/jHmok4Ksh9WKfqM

[@acedibiase7038]

Great video. Very little toom to work with on the driver side low beam because the battery. But your video helped me get it done

[@VirarAutomotive]

Glad to hear that you found the video helpful!

[@1Nonly7871]

Does this work with turning bulb as well?

[@VirarAutomotive]

kzbin.info/www/bejne/jKOse5VrqrN1kMk

[@VirarAutomotive]

Use this video. Made specifically for the front turn signal bulb

[@stephinwilliams4384]

Absolutely top-notch descriptions. Thank you!

[@VirarAutomotive]

Glad to hear that you found the video helpful!

[@creitosfl]

Any idea how to put H7 LED high beam? I tried, but it seams that I need some kind of adapter????

[@VirarAutomotive]

Sorry. I haven't tried putting LED bulbs in it. I did try putting LED low Beams in it and fit just fine. SEALIGHT 9005 HB3 LED Headlight... www.amazon.com/dp/B07G9WTHTN

[@creitosfl]

Can put back the dust cover after you install those LED that you sent me the link?

[@VirarAutomotive]

Yes you can. I have done it before. 😊

[@VirarAutomotive]

Did you try it out?

[@creitosfl]

Virar Technologies No had not yet. When I try I will let you know, I bought some other bulbs actually over the AliExpress, they look the same size ans shape like stock bulbs, but they are led without cooler. Light is a pretty decent.

[@daniyalzahid6965]

I don’t think I have to worry about the bulb being hot cause I’ll only change it when it’s not working 🤓 great video btw easy to understand and short

[@VirarAutomotive]

Thank you!

[@madibrooks7319]

Any advice for if you can't get the low beam cap off? I'm going to try wd40 but if that doesn't work I don't know what to do

[@VirarAutomotive]

Grab a towel and then use to twist it left. Once you have it twisted left, try putting a flathead screwdriver in the small gap there between the cap and the headlight assembly . That will allow you to be able to pry it out

[@davidpokhrel9916]

Your videos have helped me a lot with my hyundai 2017 elentra. I would like to request you to please add a video about how to clean the engine area safety. Thank you

[@VirarAutomotive]

Thank you for your kind words David. I would actually suggest you watch this video. It does a great job at explaining the process. kzbin.info/www/bejne/hoO2oIWhgp16ma8

[@Detergent2001]

I’m having trouble trying to take off the cap for the low beam bulb on the drivers side. Any tips?

[@VirarAutomotive]

It's probably seized cause of moisture. Grab a thick towel (makes it easier on the hands) and then wiggle the cap back and forth a few times, it will come loose.

[@Detergent2001]

@@VirarAutomotive what direction should I twist it? Same as the other side correct?

[@VirarAutomotive]

Yup. Left loosens in, right tightens it.

[@Detergent2001]

@@VirarAutomotive yeaaa idk what’s going on. I cant seem to get it out. Been trying for 2 hours now. If there’s anymore tips u can give, thank u lol. But thanks anyway! I’ll try other solutions (ask someone stronger than me)

[@VirarAutomotive]

Sorry to hear that. I don't have any more tips besides this. :(

[@shabirkabiri]

Replaced bulb, and fuse, cleaned the connector wire with Deox. Still low beam out passenger side out. I should check the relay next but where is the lowbeam light relay for elantra 2017 limited? Didn't find any reference in owners manual.

[@VirarAutomotive]

Not sure of that one. Sorry

[@sreinhold]

Perfect video. Was able to do it in 10 minutes. Thanks so much.

[@VirarAutomotive]

Great to hear!

[@hmata3]

Tip for taking off the covers on each light: use a flat head screwdriver and a small hammer to twist off/on the caps. I was trying to remove them with just my bare hands for like 20 minutes. Even tried using a crescent wrench. Ended up damaging one of the fins and both my thumbs. Then I switched to a flat head and hammer, it was off in like three seconds 😑

[@hmata3]

I was noticing the headlamp assembly too: it might be possible to remove it all by unscrewing three fasteners at the top of the assembly? Anyone try this yet?

[@VirarAutomotive]

Glad you found it useful!

[@LEOOEL46]

Really appreciate YOU! Thanks a bunch for easy instructions!! Goin to change my bulb now!

[@VirarAutomotive]

Thank you for your kind words! Glad you found the video helpful!

[@danielpastor4973]

will a H11 high beam bulb not work?

[@VirarAutomotive]

Unfortunately H11 is not cross compatible with H7 bulb. H7 is the correct size for the high beam bulb

[@danielpastor4973]

@@VirarAutomotive H7 is compatible with elantra 2018 while H11 is not compatible?

[@VirarAutomotive]

@@danielpastor4973 Unfortunately not. Not for high beam bulb. Not according to the information I found online. I don't have a 2018 Elantra with me currently so i couldn't go verify in person

[@danielpastor4973]

@@VirarAutomotive so i need to choose H7 then?

[@VirarAutomotive]

@@danielpastor4973 yes H7 for high beam bulbs

[@aimeebouldin2381]

Can you tell me how to remove the headlamp assembly on the 2018? That's what I actually need to know. Nobody has done the assembly removal just the bulbs.

[@VirarAutomotive]

Sorry, I haven't made a video on it yet. But I do remember trying to do it. It is bit hard. Need to reach behind the bumper cover to undo it and then push the headlight out.

[@Clippership840]

man my cap is really on there. I'm a strong dude and even with grippy gloves on I cant budge it. What do you think i should do?

[@elquapo24]

Thank you for this! Always refer to your videos! Keep up the excellent work!

[@VirarAutomotive]

Thank you! Glad to hear that you found the video helpful!

[@suzanstewart7853]

Thank you so much for this very easy to understand instructional video!

[@VirarAutomotive]

Glad it was helpful! Thank you for your comment!

[@once2008]

Do you know what causes the led strip on the headlight to stop working ? Is it a replaceable bulb or there is a fuse somewhere for it ?

[@VirarAutomotive]

I am not exactly sure. Let me look into that for you and will get back to you in a day or two.

[@once2008]

Virar Technologies ,, I appreciate it .. though i called the dealer this morning and they offered to replace both headlights since they are covered by the warranty .. anyway I suspect the internal led chip is doing this and most likely a factory defect.

[@VirarAutomotive]

Glad to hear that the dealership is replacing the LED strip Daytime Running Lights ( DRL) for you under warranty!

[@elengin3507]

Thank you ... you just save me money... I did it myself

[@VirarAutomotive]

You are very welcome! 😊 Glad you like it

[@vjnair15]

I hope you share how to upgrade to LEDs without altering the factory setup and recommend best model. I want to upgrade my high beam bulb can't find any option.

[@VirarAutomotive]

Here it is. Find and purchase the bulbs for your vehicle here. auxito.com/?ref=VirarAutomotive Use the promo code for a 12% Discount. 'VIRARAUTO' *If you make a purchase using the link, Virar Automotive earns money for referral* Low Beam Bulb : 9005 High Beam Bulb : H7

[@vjnair15]

@@VirarAutomotivei am really Glad for the reply. Unfortunately i won't be able to take advantage of Auxito since i am from UAE. The only doubt i have before upgrading is that the H7 bulbs won't fit with the seal cap on and the type of LED adapter that will be required for installation of standard H7 LED for the high beam upgrade. Thank you again for responding to my comment.

[@VirarAutomotive]

Hello. You are right. That is a legitimate concern. For your vehicle you will not be able to put the dust cover cap back on. I am currently doing a long term test of the auxito bulbs like that. I have them installed and the dust cover is off. Will see in a few months how the bulbs hold up and if/how much moisture gets built up inside the housing.

[@vjnair15]

@@VirarAutomotive Thanks again for responding promptly, I've bite the bullet and proceeded with ordering from Auxito directly, luckily they gave me free shipping to my country. I Hope the type i ordered fits my headlight housing, I've also ordered the adapter to lock the bulb right on place without hassle, hoping its the right type. Will update here once everything's gonna be successful. Thanks for the advice, this is the only channel thats helping me in the modding of my car. Ohh by the way, your promo gave me additional discount, Thanks a lot.😊😊😊

[@VirarAutomotive]

@VJ N. Thank you for the update. I am glad you got the bulbs, got the discount and got free shipping. Check out my bulb review for Auxito bulbs. I have them installed in my personal car right now and the difference between halogen and LED bulbs is very noticable.

[@Magistorikus9912]

Thank you so much. I greatly appreciate your videos

[@VirarAutomotive]

Glad I could help!

[@gonearethedays]

Possible to install white led lights?

[@VirarAutomotive]

Yes ofcourse. You can replace the halogen bulbs with white LED bulbs of the same size.

[@staunchy3283]

This video is fantastic. Thank you.

[@VirarAutomotive]

Glad you enjoyed it!

[@jroyal2229]

When I have to do it myself instead of waiting on my man to do it. Thanks for sharing this video

[@VirarAutomotive]

So glad to hear that! You Go Girl! :)

[@shravanbh9997]

Is the projector bulb 💡 which type?

[@VirarAutomotive]

Check the link in description

[@GreatDayMedia]

You are an excellent teacher.

[@VirarAutomotive]

Thank you! 😃

[@MrTastycakez]

You’re the best! I almost took the whole things out lol

[@VirarAutomotive]

Haha. Taking out the headlight is so much more work! Glad to hear that you found the video helpful!

[@Teddy_-cw4zo]

What’s the whitest light bulb for the low headlight.

[@VirarAutomotive]

Get them from Auxito.com Find and purchase the bulbs for your vehicle here. auxito.com/?ref=VirarAutomotive Use the promo code for a 12% Discount. 'VIRARAUTO'

[@delkhairio]

How do i change pole light in the high beam area

[@VirarAutomotive]

Pole light ?

[@red7563]

Thanks. Can’t believe your still looking at comments

[@VirarAutomotive]

I try my best to respond as quickly as I can. Glad you found the video helpful

[@nkosicollier4984]

Can u plz do the park light

[@VirarAutomotive]

kzbin.info/www/bejne/jHmok4Ksh9WKfqM

[@mohmedfarghly282]

Thanks on your videos please tell me how change small lamp

[@pawel82x]

What type of headlight bulb is in Hyundai Elantra 2018?

[@VirarAutomotive]

High Beam Bulb: H7 00:44 Low Beam Bulb: 9005 02:37

[@pawel82x]

@@VirarAutomotive Thx for answer.

[@VirarAutomotive]

You are welcome.

[@arithejelly]

Bout to try this!

[@VirarAutomotive]

Awesome! Good luck!

[@VeryTense]

This literally looks so easy thank you so much

[@VirarAutomotive]

You are very welcome! Glad you found it useful.

[@tkmj8841]

Thaaaaaaank you, you are the best one explains how to change it.

[@VirarAutomotive]

You are very welcome. Don't forget to check out the playlist for a lot more videos made just for the 2017-2018 Hyundai Elantra

[@Yoyo-wt5sr]

Thank you very good explanation I made it easy for me to replace the headlight

[@VirarAutomotive]

Glad to hear that you found the video helpful!

[@ajithpremasiri8097]

well explained the entire process. Thank you so much.

[@VirarAutomotive]

Glad you found it useful 🙂👍

[@etzioplay6904]

BTW you can touch the burned out light bulb, its ok it will not explode.

[@VirarAutomotive]

That's true. Just a habit I guess. :)

[@arlonzarate5203]

Very helpful video. What is the bulb type for lowbeam? . As h7 is the bulb type for high beam. Thanks

[@VirarAutomotive]

Low Beam Bulb: 9005.

[@magdalenebotirius6498]

what if you cant twist it frl

[@VirarAutomotive]

Try using the key trick I show in the video. Try applying force in an alternating direction. Left, right, left. That should loosen it up a little. Hopefully this helps.

[@nish.8808]

Can i put LED H7 there at 00:44??

[@VirarAutomotive]

You can try but I can't guarantee the fitment as different aftermarket LED bulbs have different cooling metal fins around the bulb which may prevent it from being installed well. Let me know if you do and if it works.

[@nish.8808]

@@VirarAutomotive thanks!!!

[@VirarAutomotive]

Did you try putting in that LED bulb?

[@nish.8808]

@@VirarAutomotive No not yet, will be doing it after a while

[@Skammee]

Good video . The drivers side low beam bulb is a biatch to get out , very little hand room , do-able but barely and i don't have big mitts. Also the black cover only turns a little bit probably less than 1/8th of a full rotation

[@VirarAutomotive]

Thank you for sharing and thanks for the tip