Rubber Tires Revolution 3D Printed Molds for Any Scale

[@ITman3Dmain]

Ready to print STL files linktr.ee/itman3d

[@benbrubaker7896]

Dang, that is cool.

[@ITman3Dmain]

Thanks )))

[@pigeonguardgames507]

Fantastic work, thank you!

[@ITman3Dmain]

Thanks

[@fedwchoung5466]

Just amazing!!!!! Great way!!!

[@ITman3Dmain]

Thanks

[@halitengin5166]

great job waiting for your truck trailer tire

[@ITman3Dmain]

Thanks

[@curtisnewton895]

and what silicon do you use ? what plastic for the mold ?

[@ITman3Dmain]

Mold - standard resin. And two-component silicone, tin catalyst

[@ronnylivbom9721]

HI ITman3D. Can you please post a link to where this silicon can be bought or what the name of it is. I like your video and the tyre, but with experience of tyre mould tyre making with regular Silicon, i know its just messy and waist of time. I would be happy if you can help

[@ITman3Dmain]

I live in Ukraine. The factory that sold silicon was bombed. I don't have a link. Sorry.

[@polizei16]

No release agent?

[@ITman3Dmain]

What is this? What did you mean?

[@phongdorc360]

Does it stick like rubber? i plan to make rc bike tires

[@ITman3Dmain]

Yes. it looks like rubber

[@1337FLINT.]

Hello, any tips to make this for 1:64 scale? since it's so tiny, do i need bolt to tighten it? thanks in advance

[@ITman3Dmain]

Hello. This does not work for 64 scale. You can do it much easier by printing the wheel on an SLA printer using rubber resin.

[@1337FLINT.]

@@ITman3Dmain Unfortunately i don't have any acces for rubber like resin, it cost very expensive if i buy from outside my country (i live in south east asia). Maybe i'll try make it into smaller size, or else i'll try to recast it with sillicone rubber into 2 part

[@VictorPaucar-jh7uk]

Hola muy bonito una tienes el archivo de los moldes

[@RCFabiocastro]

👏 muito bom meu amigo 👍🇧🇷

[@ITman3Dmain]

👍

[@theodordimov6518]

very cool! How would you say the grip of the tires compares to regular rubber tires?

[@ITman3Dmain]

Tire grip is the same as standard

[@MrGTAmodsgerman]

Why does the tyre look reflecting shiny after putting it out of the mould and then in the next shot all hairy and matt?

[@ITman3Dmain]

As you may have noticed, the tire only has a glossy surface on the side. The top surface is matte. Pay attention to how the mold was printed. Probably due to the location during printing.

[@MrGTAmodsgerman]

@@ITman3Dmain I know the tread side is matt to begin with but the whole tyre is matt in the last scenes 7:38 which was not the case before. And i noticed this in other same type of process videos too. Where they print and mould a tyre.

[@ITman3Dmain]

@@MrGTAmodsgerman I filmed some scenes some time after using these tires on my cars. Maybe because of this.

[@MrGTAmodsgerman]

​@@ITman3Dmain Well then looks like you don't know either, have to find out myself. Well thanks any way.

[@ITman3Dmain]

@@MrGTAmodsgerman I never paid attention to the surface. I had a goal to create custom wheels and I achieved it.

[@OFFCODEV2]

How much for a custom mold for 1/8 th scale ?

[@osmanpasha_diy]

Cool! What paint and rubber did you use?

[@ITman3Dmain]

Silicone rubber for molds. Two component composition. Tin based catalyst. Density Shore 30A - 40A. The paint is sold in the same stores as silicone.

[@osmanpasha_diy]

@@ITman3Dmain Thanks! Does Shore hardness relate to how slippery the tyre is? I've seen tyres from mold sillicone be too slippery and loosing any grip after even a tiny amount of dust (because dust sticks to silicone). Do you have a link to your silicone?

[@ITman3Dmain]

@@osmanpasha_diy No, it doesn't. There is no link because the plant was bombed.

[@artafac]

@@ITman3Dmain what the hell !! where is that

[@ITman3Dmain]

@@artafac Hello. It's here linktr.ee/itman3d

[@dustinshort1982]

does the tire feel like a normal rc tire or is it a really soft resin

[@ITman3Dmain]

You saw the creation process in this video. It's silicone.

[@aziztuzun2434]

What is the material you use to color silicone?

[@ITman3Dmain]

When I bought silicone, the Extra is attached to the silicone. Black color.

[@pocovolvedor]

You can use toner ink too.

[@scalemodelmasters]

Hi bro can you 3d print a 1/14 scale tamiya tyre mould for me please rply

[@ITman3Dmain]

Hello. I saw your letter that you wrote to me by e-mail. I need to know more information about what you want me to create.

[@10OZDuster]

could you inject the black stuff into the mold instead ? to be less messy...

[@ITman3Dmain]

Tell me more how to do it? Do you have experience in tire manufacturing?

[@okanagcaer95]

Is there a photo or brand of the silicon mine? Thank you

[@ITman3Dmain]

This is a Ukrainian production. At the moment, due to the war, production was destroyed.

[@kamalsharma6520]

Can i buy this mold online sites, i requeste please help me sir

[@ITman3Dmain]

Yes. www.cgtrader.com/3d-print-models/hobby-diy/automotive/stl-printable-mold-rc-truck-tire-rims-and-tire-files OR cults3d.com/en/3d-model/game/mold-rc-truck-tire-rims-and-tire-files-3d-print

[@mrtyko]

Please do a German lorry tire (Gelende) in bigger scale 1/10 1/8 and 1/6

[@ITman3Dmain]

how she looks like? do you have a link to this tire?

[@scalemodelmasters]

I can send you the pics of the tyre and dimensions

[@mrtyko]

@@scalemodelmasters Please do so

[@karolapolinsantillan2087]

Quiero moldes para hacer llantas de camión en escala 1.24

[@ITman3Dmain]

Enlace a archivos en la descripción debajo del video. O en el encabezado del perfil

[@fullsend5641]

Is this any specific resin?

[@ITman3Dmain]

This is a two part silicone.

[@ronnylivbom9721]

@@ITman3DmainSorry for old post question but where did you get 2 part silicon?

[@ITman3Dmain]

@@ronnylivbom9721 I live in Ukraine. The factory that sold silicon was bombed. I don't have a link. Sorry.

[@topfisioterapia1330]

Alguém aí desenvolve forma ?

[@ITman3Dmain]

Não entendi a sua pergunta. desculpe

[@topfisioterapia1330]

@@ITman3Dmain perguntei se alguém poderia desenvolver o projeto do molde em um tamanho maior !!

[@ITman3Dmain]

@@topfisioterapia1330 Qual escala você precisa? Atualmente disponível em 10, 12, 14, 16, 18, 24, 25, 28, 32, 35. www.cgtrader.com/3d-print-models/hobby-diy/automotive/stl-printable-mold-rc-truck-tire-rims-and-tire-files

[@topfisioterapia1330]

@@ITman3Dmain 1/9

[@frogicus]

I seem to have trouble getting resin to set in a silicone mold . Have you had any issues ?

[@ITman3Dmain]

There are several types of silicone catalysts. It is likely that you are using the wrong silicone catalyst, which could cause problems.