How LED works ⚡ What is a LED (Light Emitting Diode)

[@justincuthbert8474]

This is probably the best breakdown explanation of how diodes and LEDs work i have seen. Looking forward to using it to help electrical apprentices understand the internal workings of LED's. Thanks

[@yousafzaiaa7453]

I have very similar views so there is no need for a duplicate comment!

[@doktormcnasty]

@@yousafzaiaa7453 Me too!

[@jyotibendre2726]

Me too

[@SulBash3]

Same

[@dreamhigh2434]

No

[@michaeledwardharris]

This is the best explanation of semiconductors and LEDs I've ever seen. Exceptionally well done.

[@VirtualBrainENG]

Thanks!

[@jorgecueto9649]

I casually have seen many many videos of diodes and semi conductors, but this video is explicit and straight to the chase and I've finally understood

[@ultimateenergizerguide467]

At the core of every LED is a combination of two materials: N-doped and P-doped semiconductors. N-doped silicon, infused with elements like arsenic, carries extra electrons, while P-doped silicon, infused with elements like gallium, is characterized by "holes" where electrons can reside. When these two materials are placed together, a small but powerful phenomenon occurs-some electrons from the N-doped side flow into the P-doped side, creating what’s called a depletion zone.

[@charlesw9875]

That's one of the clearest descriptions of anything I've ever seen.

[@fuadtushar7277]

Underrated Content. Your clear and cogent explanation deserves more views, man. 😭

[@yourdaysbebright4738]

Very educational and clear. I'm really happy to know how these work now!

[@mikefixac]

After reading about diodes for over 50 years, I finally get it. One has to truly understand what happens at the subatomic level. What a brilliant presentation. So very well done, thank you.

[@11moonshot]

As a physics teacher I say: Grand way of explaining the basics of this phenomenon! Thank you for your great animation/ rendering! Michael B. Butter

[@crawford323]

I was fortunate to be a technician on a research vessel and was tasked to illuminate evenly split hard rock core samples. The area to be illuminated was only 40 mm in-depth but in order to achieve the depth of field which was specified by the design criteria, the intensity if the illumination required the light source to be very close. 100 mm. As light dissipates to the square of the distance, the very bottom illumination would have “fallen off” enough to be visually detected. As the intensity of LED’s can be increased and decreased without change in color temperatures, I was able to make an array of lights and varied the voltage to paint evenly from top to bottom. This would have been impossible with halogen, fluorescence or other types of illumination. LED lighting was key, however we had to match color temperatures of all of the lights in the array because of the lack of consistency in manufacturing. Also LED lights are extremely heat sensitive and will change color temperature over time. It is a newer technology and has its share of growing pains if accuracy and consistency is needed.

[@user-LEDFY]

ledI make LEDs.

[@chainstair4]

Cant believe how good explained that was. I had it played fast forward on 2x and understood every single bit. Love it

[@davidbwa]

Thank you for a detailed yet easily understandable explanation.

[@NightWear21]

Excellent video! I've known diodes and studied them. This is gold. Thank you.

[@lightbox617]

This is seriously good science at a level and with language that I can understand. color temperature was an early problem with LED light sources. the temp was "cold" and ugly. Quite quickly, manufacturers figured out how to add contaminants to give a warmer light.

[@jhanthony2]

Nice clear explanation. Thanks for all the effort you put into these. And those graphics!

[@suchclevername]

Hats off to you for helping me FINALLY understanding WHERE the light actually is emitted from. Fascinating.

[@PurgatoryVLM]

that's the best description i've ever seen. Bravo

[@weirdcreatures4985]

Best Explanation I've ever heard about any kinda diode. Hats off man

[@manfredgahr4748]

Hello, thanks a lot for this brilliant explanation! I finally grasped, how diodes, transistors and LEDs are working. Really excellent, this video. Greetings from France, Manfred

[@user-LEDFY]

I make led lamp beads.

[@hughleyton693]

Transistors are very different, but do use two junctions, the main ones I used were n-p-n junctions so worked easier with +V supply voltages on the Collector. . . . Transistors are Current amplifiers, not Voltage amplifiers like Valves ( Tubes ) were, although modern FET Transistors are Voltage amplifiers.. . . The simple principle of using a normal BJT transistor, the most common type. . . Is that you put + Voltage onto the Anode or Collector and due to the junctions, no current ( electrons ) flows between the Emitter to Collector.. . But If you put some +V on to the Base, then that easily causes Current to flow between the Emitter and Base, which then opens up the path for good Emitter to Collector current flow. . . . Very typically you could get about 100 times as much Current flowing between Emitter to Collector, as the Current you made between Emitter to Base.. . We call that a current Gain or Hfe

[@mrfxm55]

This is a cool channel that my brain just absorbs every minute of the content.

[@v8pilot]

I was a project manager at EMI Research (UK) in the 1970s. One of my engineers had used one of the new green LEDs to indicate that his system had passed all fault checks. My boss, an assistant director, was appalled at the extravagance of using a green LED.

[@noobda597]

How you are still alive

[@v8pilot]

@@noobda597 Don't smoke, ride a bicycle daily, inherited the right DNA. Plus I was younger than most of my engineers at EMI.

[@Handleyman]

And some extremely important scientist back decades ago sad he couldn’t see the need for any more than 3 computers. 😉

[@Peni-td7eg]

ok

[@tenrec]

Or 640K of RAM@@Handleyman

[@Ehill315]

That was an enlightening video on LED’s and Diodes. Thank you for sharing.

[@malte1984]

pun intended?

[@randyarbogast2716]

This was excellent! I had watched other tutorials before but this opened my understanding! Thank you!

[@warlockpaladin2261]

Former engineering student here... this was very nice work.

[@Adhithya2003]

Brilliant. This channel has a bright future.

[@beyondfossil]

Excellent and to the point! I'll save this video as a handy reference.

[@thegametechwithluke6155]

Very nice. It answered my question more than i expected!

[@VirtualBrainENG]

That is great 😁

[@h7opolo]

extremely aesthetically pleasing animations

[@josephdakawao4833]

I had never imagined coming across such beautiful explanation. Your effort in producing such videos can never be less than the excellence of nobility 👏👏👏

[@artofbeingurself2972]

Definitely the person who explained is a best visualiser....my god ...just blown away😅🌟

[@SaniyaSachinm]

Thanks I got New KZbin Channel from this video to learn more knowledge.

[@pse6775]

I forgot everything after I graduated since my current job does not require any electronic knowledge. It is a very nice recap for me.

[@tanvirhasanmonir1627]

One of the best explanation ever, thanks a lot

[@GavanWilhite]

I was skeptical with the robot voice, but this was great! Solidly animated explanation.

[@abdullahnaim9715]

Best explanation i've had in this regard so far

[@prasadvuriti5824]

thank you for the clear explanation

[@alinabeel7953]

i have been searching for this information forever. thanks for answering in such a simple video.

[@hughleyton693]

Any questions. ?

[@chiffon7656]

as simple as it looks but details of how it actually works is complicated, salute to those great minds who invented this "everyday use" tech.

[@ardonjr]

Okay this was so clear.. I had to subscribe. Amazing examples and explanation. My compliments.

[@jacksonchintu9071]

Thanks for the well animated explanation

[@aritrabhattacharyya2374]

Ohh What a crystal clear explanation of electrons transitioning from Conduction band to valence band ❤from India

[@tombuilder1475]

great visual description!

[@rexpayne7836]

Great content and presentation. 🇦🇺 😊

[@crosshair1982]

The best video I saw today ! Your sincerely Fereydoon shekofte

[@tompsheridantsheridant7354]

And **DARZHELFARSHELKHOPH** TO YOU

[@kayvanhamzezadetofighi2346]

Thx for the brief explanation

[@garneybaker]

I got to tell you of a little story, regarding the LED. I was in high school at the time, taking “electronics”. We were learning the principles of amplification, rectification, and modulation, utilizing Vaccume tubes. Solid state electronics were discussed in our lectures, and the “light emitting diode” was discussed. Our instructor at the time, who had as a young man apprenticed as an electrician, and installed the first fluorescent lights in our city, stated “A very unique principle of electronics, but appears to not serve any useful purpose”. God I wish I had not listened to that lecture 😂😂😂

[@b43xoit]

"Vacuum", not capitalized. ". . . utilizing vacuum tubes."

[@rishikwatt483]

Liar.

[@hughleyton693]

Well he was sort of right in the 1970's . . . LED's were very low light levels, the best could carry about 6mW or 0.06W of electricity. . . . I was the first in our design centre to actually use LED's for Indicators.. . They were 3mm and 5mm diameter in those days, and became very good indicators, only Red, Orange, Yellow and Green, in the early days, but that was enough for indicators. . . I mainly used frosted white glass LED's so that if you saw colour, it was working, and not sunlight reflected of the glass ( plastic).. . . I used many in the equipment I designed, amongst just indicators, I used them to indicate the voltage in circuits, thus saving technicians using voltmeters to see if the circuit was On or Off. . . In one Power supply circuit, the LED would show Green when all was good and Red if there was a problem.

[@JamesFolkers]

@@b43xoitEh?

[@b43xoit]

@@JamesFolkers , I'm saying that for clear writing, @garneybaker, 1 year ago, should have said "utilizing vacuum tubes" in place of "utilizing Vaccume tubes". There are no such tubes as "Vaccume" tubes. They're vacuum tubes.

[@markallen1782]

Reverse polarization of a PN junction can be used to vary the capacitance of the junction, turning it into a variable capacitor for radio applications.

[@chefjoesplaylists2565]

Electrically tunable radios before Sorfware Radios used these and they were called Varactors, such as the MV204.

[@hughleyton693]

Now that is getting far more into electronics.. .. Yes, VeriCaps. . . Going even further, we made Parametric Amplifiers for Microwave Receivers, using that principle.. . . A parametric amplifier principle is that you feed the signal in, when the Capacitor value is high, then you effectively pull the plates apart, reducing the capacitance value, which from ½C.V² will now have to increase the Voltage across that capacitor. . . So now you have a Voltage amplifier for very small, low level signals. . :-)

[@nipuntheekshana6817]

You deserve more subscribers man.... hats off

[@DorkyThorpy]

Well done, nice video.

[@stevedmytrusz8347]

Great video...Thank you! I didn't realize how much we knew about LEDs back in the 60's. Or 70s - recent, actually. Technology was mostly there, it seems... but not quite.

[@kaustubhsinnarkar8416]

Very good illustration and explained

[@ZhanCaitao]

Nice video.

[@williamsrensen8449]

I am in high school and to be honest we haven't learned anything about diodes yet but I wanna learn more. And this is the only video I have found that explains what leds are in more detail. Others just assume you know what a diode is Thanks

[@hughleyton693]

Do you have any questions you would like to ask me, about Diodes or Transistors. ?

[@joshuachristian5443]

Nice. Didn't learn anything I didn't ALREADY know...lol. seriously though, nice breakdown. Very informative.

[@dannyunixanalyst9018]

Good work. Great animations. I understand LEDs now :)

[@virupannamedikinal]

This video is exactly what I wanted to watch. Very neat explanation,thank you so much.

[@syedabdullah2069]

To me LED is an amazing Electronics miracle, the way explained enabled me to understand the badics so easily ! Keep it up, please.

[@afsaneemami580]

It was verrry nice and helpful. thank you

[@carsenvillegas7259]

tank you. excellent video dude.

[@SurinderKumar-os5il]

Sir, Good demostration Thank

[@brucemcpherson8832]

Good animation, but the diode surface is not covered in PHOSPHORUS, it is covered in PHOSPHOR which is a completely different thing

[@hughleyton693]

Yes and No. . . . Correct, Basic LED's do not have any Phosphor. . . They radiate which ever colour their doping makes them work at. . . We only cover the LED with Phosphor for White light. . . The phosphor allows some Blue light through and converts some blue light to produce Red and Green light, so our eyes think it is White light.

[@surge_alloy]

woaaaaaaaaaoaooooooowwwww ! your animation & explanation is so so valuable ! Thanks for teaching me ! 7099 respect & 6700 love for you !

[@flyingmedic]

Thanks

[@broderickcamel1701]

man, bad ass infotainment right here

[@imaranmakrani739]

Excellent explanation in order to all parameter considered

[@randycarter2001]

They often eliminate the second electrode wire. The die is mounted to, in your video, the metal reflector. This becomes the negative input. The electrons pass upward to the junction and are bled off via the positive electrode wire.

[@hughleyton693]

I never ever saw any like that or used any like that.

[@GeniVaraku]

4:19 is where the video progress bar meets with the vertical line spliting 2 sides of the screen. you are welcome

[@tomv7035]

Slight mistake at 3:15. A p-type semiconductor doesn't have an overall positive charge because if the dopant has one less electron then its nucleus also has one less proton.

[@jackmatson962]

I first learned of LEDs in the mid- or late 60s and was fascinated as the different colors were developed and efficiency increased. I was aware of the narrow spectrum of light they produced so was excited to see the advent of the 'white' LED. Not so much to my surprise, they are actually closer to the old fluorescent lamps, with the blue energy supplied by the PN junction instead of the mercury arc. But, like the fluorescent, most of the useable light comes from the conversion supplied by the phosphor layer that mimics the colors 'temperatures' we all knew back when: Warm White, Cool White, Daylight, and everything in between. Should these be more accurately called SSFs (solid state fluorescent)?

[@b43xoit]

Sounds like a good term. And I notice that some of those fluorescent materials, but not all, are a little bit phosphorescent. So, when I remove the power and look at my light, it's still glowing.

[@dimpumutyala2656]

Hi sir I am India and i am a electrical engineering student i can't understand electronics so can u please help me with this subject because I don't have any knowledge about this subject please sir

[@aaronthenorm5400]

Great exsplanation! Now tell me how this was ever figured out!!!!!😮

[@dougc.1773]

White light LEDs are a type of "Flourescent" light. They work the exact same way that flourescent tube lights work!

[@hughleyton693]

YES, that is correct, so technically they are not LED lights, but Flourescent Lights. . . . Actually the phosphor is translucent, and allows some Blue light through, so they are a combination of Blue LED's and Red/Green Flourescent lights. 🙂

[@niranjanselvamperumal3397]

Very good explanation . Encouragement for those who in this field.👍

[@YouTubePREMIUM-sd3je]

i cannot understand this in my physics chapter .but one day i randomly scroll down and get this masterpiece. thanks brother

[@kennethbarker852]

1st class video to watch thank you take care kind regards from me kenneth

[@calicoesblue4703]

Nice video. I subscribed. Good stuff my guy😎👍

[@queenskennedy2720]

Great animation and explanation well done

[@donmaroadamx564]

beautiful presentation, the best i have seen

[@ganyk13]

EXCELLENT DEMONSTRATION OF LED LIGHT . Thanks .

[@faisalahamed3186]

Best of the best i have ever seen😊

[@sanneo1]

Subscription owned. Great video, thanks :)

[@shivanihr5879]

Best explanation ever. 👍❤

[@anupkumarkundu8518]

Beautifully explained. Thanks.

[@MutheiM_Marz]

basically, free electron have more energy and bonded electron have less energy. when free electron go in a hole it will eject an excess energy out in a form of electromagnatic wave i.e light.

[@Adi-Xplains]

That's the explanation we all wanted. Thank you so much bro

[@jamesslick4790]

Yay!!!, Shows REAL current flow (NEG to POS)! Why do so many diagrams to THIS day show "conventional flow" (POS to NEG) whenever a battery (or cell) is involved?!? (Drives me nuts!) Thank you for doing it RIGHT! Earned a sub!

[@ACitizenOfOurWorld]

Don't look at a pc board or you may lose it. Did you know that the arrow on a real diode points in the direction of conventional current flow :)

[@jamesslick4790]

@@ACitizenOfOurWorld Oh, yeah, I know. 🤔😖

[@jamesslick4790]

I am 61 years old. I grew up with incandescent and fluorescent lighting. LED lighting is a "GAME CHANGER" (as the "kid" would say). Unlike a lot of "older" folk, I am firmly in the camp that a lot of NEW tech is better. Forget "hipsterism". Digital photography, digital audio and digital audio were "wet dream" fantasies to my 1970s ass. (Would have had documented a LOT more of my life had they been "consumer items in "the day") LED lighting solves the problem of buying bulbs every week with the BONUS of using a LOT less power. Sure, I'd rather NOT have to navigate an "iPod" in my car to work the radio or HVAC (Would TOTALLY go back to 1982 dashboards if I could) But the rest, Yeah. Much, Much better NOW than then!

[@lewebusl]

Very well conected topic with Animation to get to the point more compehensive ...

[@cd8836]

Thank you! This was perfect!

[@solaokusanya955]

💯...thank you very much!...I love you!..this is best by far, the most explicitly explanatory type I have sent of this phenomena!.. May the universe continue to favor you!..amen!!

[@jrzzrj]

For me, much too much more than I need to know. But I am sure there are at least six people who will benefit from this detailed video. Thanks.

[@RixtronixLAB]

Nice video, thanks for sharing :)

[@YariyaMedia]

Nice information with very greatly explaining ability. Great work.

[@Asutosa]

Amazing explanation.😁😁

[@JIDEHHIGHELEMENTS]

very interesting videos , thank you

[@maanidhie4050]

Fantastically explained

[@KaliFissure]

Great and much more in depth than most!

[@nornje]

Wow! Very interesting. Thanks!

[@charleswoods2996]

Always wanted to know! Now I know. And that robot voice was almost convincing.

[@_ChavdaKrunal]

Very good represent of Content ❤

[@saskiavanhoutert6081]

Frits Philips made the LED ( Light Emitting Diode) in which year I don't know but it was far before WW 2, thanks for this video, great explanation, kind regards.

[@ultimateenergizerguide467]

A Light Emitting Diode (LED) is a remarkable electronic device that converts electrical energy into light using semiconductor materials. At its core, a LED has two slightly different semiconductor layers. When an electron moves between these layers, it loses energy in the form of a photon, and this process generates light. The specific energy lost determines the color, giving us a wide range of colors from red to violet. For white LEDs, the process involves a blue LED coated with a phosphor. The phosphor absorbs some of the blue light and re-emits it as a lower-energy yellow light. The combination of remaining blue and emitted yellow light creates the white light we see. This simple yet elegant mechanism has revolutionized lighting technology, making LEDs efficient, durable, and versatile.