Visual Basic Tutorial - 13 - If Statement

[@HippyGiraffe]

I was just notified of a reply to a comment I posted on one of the videos in this series about a year ago: the question's answer is was very obvious for me, reading it now. At this moment, 11 months later, I'm fluent in VB.NET and C#, and know my way around Java and C++. I'm only posting this comment to tell everyone out there to don't give up! I was there less than a year ago, with no programming knowledge whatsoever - now, I code whatever I want and am planning to start software engineering in uni. KEEP GOING! You'll get there - and it's so much fun!

[@donniboi3708]

hahgay.com/

[@rmz1994]

i studied other languages before this series and i gotta say I LOVE THE WAY SAM IS TEACHING US he is straight on point with what hes doing and i feel confident ima make it to the end satisfied

[@G1nnix27]

You probably don't even read these anymore, but I would just like to point out that my teacher makes 25 minute videos over these same things and I still just don't get it when he does it. Your tutorials are short and right to the point, thank you. These videos are amazing

[@JDMx607]

Just would like to say thank you! I understand most of this stuff, but a few things were still new to me, and your videos, including this one, helped me.

[@Prathamesh17.17]

Sir I'm reallly really going to thank you .Your video is really going save me🙇🏻‍♂️ for my practical exam.Thank you so much sir.

[@HS-dl6vl]

Love you bro! Thanks for getting me clear about the topic ❤❤❤❤

[@solorzanoronald1776]

your awesome, best tutorials I have seen

[@MasterMitch200]

I like Bucky more, but Sam is good too. The reason I like Bucky more is because I watched more tutorials with Bucky in it and Bucky makes it fun to learn, but like you said, Sam is always straight on point, so I like both of them.

[@HexPlays]

@DOVARIRAMU when your coding it you can set the password to be whatever you want. the end result is that if you type it correctly youl get a conformation, and if you dont it will close. as long as the password you type into the console matches the one you coded it will work fine ;)

[@denizenofdarkness5030]

Hey, I tried doing conditional statements on visual basic using an online compiler. I did it exactly like how it should be done, but it's stil showing an error. Got any tips?

[@magdangalaira9717]

Thanks for sharing your idea about that😊I hope you can make more videos😊

[@Poofu]

is there any way to make it so if it is anything else it says something else?

[@mdjaberhossain7387]

Thanks a lot sir...These are most helpful for beginner

[@Yuoruddo]

Why does the single equal sign work here? Shouldn't you need a double equals?

[@rvinelle7142]

hey how can i download visual studio is there link to it

[@mrscurry99]

why do you only use console applications?

[@ThesexyMrX]

i agree, i need some forms tuts

[@azkymohamed123]

just here to says thanks for the videos

[@TheLousyProductions]

Because the If statements do not exist BEFORE he types his password, notice that we have typed the If statements only AFTER he types his password. I'm assuming that each Line of code is read one by one in the order they are typed and not read all at once. For it to work the way you are saying, I guess the If statements would have to come BEFORE everything else. Try it out.

[@TheCrookHook]

@Yuoruddo I was also used to the double equals when comparing (in Java). In VB though, I guess it's only 1 equals to compare lol I didn't like that either XD

[@sunehrraalamtorosa1101]

Can you tell the pseudocode for this?????

[@ivandrofly]

How to ignore the string comparing?!

[@TheCrookHook]

@DOVARIRAMU If you would have written sam123 and did "if password = "thenewboston" then it wouldn't have done anything because you need an "else" statement. The "else" statement is used if the condition you are veryfiing is false. ex: If password = "thenewboston" then console.writeline("Good pass") else console.writeline("Wrong pass") end

[@mohajeran]

Hi Sam; I have an excel sheet that does some calculations. First, cell A1 needs to be initialized by a number (let’s say 1). Now cells A2 to A5 read the value of A1 and do some calculations. If one of cells A2 to A5 has a value between equal to 0, then value of cell A1 has reached its maximum, otherwise A1 should be increased by 1. Upon incrementing A1, I need to check again if one of the cells A2 to A5 hold a 0 value, if yes then A1 has reached its maximum value, otherwise A1 needs to be increased again by 1, and so on. I think this should be done by VB, but I am not sure how. Any feedback you can give me. ? thank you very much.

[@mohajeran]

I find the solution.!

[@melek9048]

did you read 'The Witcher' or played the game?

[@apoorvgoel490]

This guy rocks

[@ChrisPTY507]

i dunno why u used end if after the "welcome sam" quote,that if statement is incomplete because you need an else to finish it,because basically is the name is not sam,the incomplete if will do nothing,just a waste of space...

[@F_L_U_X]

Gerald is not equal to Sam?! SINCE WHEN?!

[@RAMUDOVARI]

If I want to create my password is "sam123" then what is my result?

[@notserpmale03]

Private Sub forwardcontrol1_Click() If WebBrowser1.Visible = True (This part is giving me the error, it wont register as in if statment) WebBrowser1.Go Forward End Sub what is wrong with that. and no, (it isnt the go Forward part that has worked forever)

[@retro2712]

and it needs to be If WebBrowser1.Visible = True then webbrowser1.go forward endif

[@OptiGE]

After you Write that your name is sam. Then Welcome Sam should pop up. Then AFTER that it should ask for your password... Why doesn't it work like that? Why does the Welcome Sam string wait until you have written the password to?

[@Yotsuba090]

I know this is old, but adding a comment here to show what you're talking about, because I was asking myself the same thing when going over this tutorial. Putting this here in case someone was curious what the code would look like if they come across this comment & ViD. Module Module1 Sub Main() Console.WriteLine("What is your name?") Dim username As String = Console.ReadLine() If username = "Sam" Then Console.WriteLine("Welcome Sam!") End If Console.WriteLine() Console.WriteLine("What is your password?") Dim password As String = Console.ReadLine() Console.WriteLine() If password = "apples" Then Console.WriteLine("You have entered the correct password!") End If Console.ReadLine() End Sub End Module

[@zalmanpinuozman8250]

Thank you for than teacher✔✔🇸🇴

[@o0OMadMikeO0o]

@onlivegamer You could have writte Console.WriteLine("Welcome" & username) and skip the first if statement but nevermind. I guess if was the objective of the vid xD

[@BunnehRealm]

This isnt bucky, this is sam.

[@rmz1994]

thanks for that

[@MrHolesVids]

@gilbert4321 ?

[@evaldaskowka]

@Yuoruddo Different language buddy

[@RahilWazirAli]

after 100 tutor's

[@o0OMadMikeO0o]

@JestTutorials Cool, Want a cookie now you fool?

[@ChrisPTY507]

I was born in mars......am i weird?

[@magoomba]

T. Dodge

[@RahilWazirAli]

50 liker!!

[@kingzmasendeke3374]

anyone 2020

[@morg4nevs713]

ok

[@JacobBanerjee2821]

100st, seriously.

[@bramvermeulen3447]

0 dislikes

[@pmackni]

0.o