Vittorazi Moster Pull Starter Tips and Tricks

[@JPTulo]

Great info!!

[@AviatorServiceCenter]

1:30 What is a flash starter and why do we need them? 2:30 What are the options? 3:15 When is it time to service your starter? 4:25 Looking over your starter when removed from the engine 5:15 Rubber anit-vibration mounts, what can go wrong, what to look for 7:05 Disassembly begins 7:20 Elastic ring and plastic hooks 9:15 Plastic hook housing 9:30 Plastic pulley, what happens between the 2 pulleys, a common failure area 10:16 Green banding material, what to do with it 10:55 Recoil spring 11:42 Vittorazi commonality between different engine models and pull starters 12:38 Changing the anti vibration mounts, use common sockets 13:45 Lubricants and how to use them. (NOTE: in dusty climates use what is referred to as "dry lubricant" for guns") 14:40 Reassembly begins with recoil spring tip featuring real world struggling 16:40 Struggle continues, next level trick is featured to stop the struggle 17:14 Plastic hook housing reassembly 18:30 Shims, Vittorazi manual vs. my method 19:43 Plastic hooks(pawls) 19:58 Elastic ring reinstall 21:27 WATCH THESE NEXT STEPS FFS!!! Spring preload according to the Vittorazi manual. IMPORTANT!! 23:35 Rope installation 23:56 Preload demonstration begins 26:03 Note about installing a brand new engine or brand new starter 27:19 Starter rope roller pulley contraption device 27:55 Instaling the serviced starter or new starter to the engine and routing the rope to the chassis 28:45 Conclusion