Atomis Shogun "well it is my best friend and emergency contact." So deadpan.
@d2productions4094 жыл бұрын
At 1:31, Tim says "In all editions of vMix, you have the ability to send out one external output." This is a little misleading, he means AT LEAST one external output. In 4K and Pro, you get two external outputs (as he actually says later in the video).
@brmancini5 жыл бұрын
Cool new lower!
@georgeluna62173 жыл бұрын
is it possible to have the remaining time of the "on air video" on a separate display output?
@HJBProductionsLLC3 жыл бұрын
It works! Yeah!!
@Brodauyot125 жыл бұрын
Nice one
@hanklau7034 жыл бұрын
Hello, How many channels of SDI Output can Vmix External Output Settings support? thanks good job.
@vMixhd4 жыл бұрын
Hi, a maximum of 2 external SDI outputs with vMix 4K and PRO.
@petpopshorts33892 жыл бұрын
Obrigado
@EvanDiDio2 жыл бұрын
The hand models page! 🤣🤣🤣
@joeaustinug10799 ай бұрын
How can I solve the problem when the video buffer when using a USB video capture card before live stream
@videoboda3 жыл бұрын
hello with Blackmagic Design DeckLink 8k pro I could connect 4 cameras inputs? or only one in one time. reggards
@StavK5 ай бұрын
I need to send out 4 different outputs from vMix via SDI to an ATEM switcher, can it do that or can it only do 2 external outs?
@philipikpeiwunna3 жыл бұрын
Does vMix support output to Black Magic Mini Monitor? I tried to output to this and I can see it on the list of available cards in the external output setting but when you enable external output nothing shows on my monitor.
@rodgersmwimba42325 жыл бұрын
powerful
@DharmaRockAudiovisual3 жыл бұрын
I Use Vmix to record classes. Sometimes i want to send cue messages for the teacher that he can read on his tv monitor ( in front of him), but those messages will be show in the recordings. Theres some trick to put this messages on screen ofr the teacher without showing it in the recordings?
@kikat39393 жыл бұрын
Does it support blackmagic decklink mini monitor 4k?
@vMixhd3 жыл бұрын
Yes, output is supported with that card- www.vmix.com/software/supported-hardware.aspx#capturehardware
@kikat39393 жыл бұрын
@@vMixhd thanks for the reply. I bought the card but the output from the card is cropped/zoomed in a bit, is there any way to fix?
@innomind3 жыл бұрын
Can vMix live capture each of the four SDI inputs into four separate videos while also live switching and recording the live edit? Obviously using the DeckLink 8K Pro capture card...
@vMixhd3 жыл бұрын
The MultiCorder option in vMix 4K and PRO is available. It allows you to record camera feeds individually. kzbin.info/www/bejne/jKe6h4ChhshpkLM
@미카-d3f4 жыл бұрын
Hello! What do I do when I can't enable external output? Whenever I click external, it shows "external renderer not found." Thank you!
@pawsoutst4 жыл бұрын
Did you ever figure this out I am having same issue
@edoardoschiavone445411 ай бұрын
hello it possible to set up a decklink quad 2 using the channel 1 and 2 for fill and key to send at an atem, and the other ports for get six inputs?
@mohsenzarrabi58332 жыл бұрын
How can i have more than 2 external output in vmix ? i want to send 3 different output to the Blackmagic capture card. is there any way?
@TELESARDEGNA4 жыл бұрын
Good day I wanted to know why in the external and the program is very late ?? how can I synchronize the exsternal output with the program? thanks for now
@manickarajsunish21162 жыл бұрын
Is input and output supported at the same time in black magic intensity 4k
@thangnguyen83183 жыл бұрын
can we use the external output and livestreaming at the same time?
@cyber-prince11 ай бұрын
is there a way to show the output of the vimix from my laptop using the hdmi port on my laptop connecting to a hdmi television
@vMixhd11 ай бұрын
Yes, but you'll use the Fullscreen Output in vMix, rather than the External Output. Here: kzbin.info/www/bejne/qIHIq3Wca66Hb5Y
@eyalgelberg4 жыл бұрын
How did you capture the desktop with the all vMIX software without see it in the right monitor, the side of the main output where it usually seen there? Is it because it a pro version and you can choose your outputs?
@isaakotupai15453 жыл бұрын
Does it works for DeckLink Extreme 3D+ 1?
@Christianmax996 ай бұрын
Would be possible to send just graphic from 1 computer to another and play as an transparent overlay? So someone else can do the graphic on 1 pc and on the other pc handle the Live stream?
@vMixhd6 ай бұрын
Yes that would be possible. You can use vMix and use NDI locally, but you would need a 2nd installation. You could also use the Web Controller on another computer on the same network and that would give you some titling capabilities (kzbin.info/www/bejne/hXuyhXdpapKheqs). There is a lot of NDI title software that allow you to send graphics over the local network.
@arieawp4 жыл бұрын
Hi tim, can i use one of the output on the graphic card to be as an external output? Or i have to use a capture card with output ability?
@vMixhd4 жыл бұрын
You can use the FullScreen option in vMix which outputs video via your GPU- kzbin.info/www/bejne/qIHIq3Wca66Hb5Y
@kusumasidiqalifhanifah79985 жыл бұрын
Hello. if i use decklink duo can i use 4 inputs and 2 external outputs with 1 card ... thanks good job
@vMixhd5 жыл бұрын
Hi, you can either use the ports as input OR output.
@MetrovisionNetwork3 жыл бұрын
With wich card i can use 4 different cameras?? Plus one external output?
@vMixhd3 жыл бұрын
If you wanted 3in/1out you could go with a Blackmagic Duo 2. If you need 4in/1out, you'd need a Quad 2
@MetrovisionNetwork3 жыл бұрын
@@vMixhd could a Blackmagic Design Decklink 8K Pro Cinema Capture Card? For 3in/1out?
@PiDsPagePrototypes5 жыл бұрын
Is BMD's Intensity Shuttle USB3 still classed as 'unsupported' ? Getting that thing to work is, challenging,.... :D
@vMixhd5 жыл бұрын
Officially it is still unsupported. The challenge is finding a system it is properly compatible with. So it may work on some systems and others it may not.
@PiDsPagePrototypes5 жыл бұрын
I have a system that matches BMD's recommendations ..... It still was a nightmare to get it to work 🤣 Just trying to decide between trying it or buying a new PCIe based output card.
@emmanuelolu-akinyemi80064 жыл бұрын
Is there a way to get rid of the delay noticed using the external output feature? In live production, the external output adds delay on the TV Screens.
@vMixhd4 жыл бұрын
Due to processing on the computer, all software-based encoders will introduce latency. For lowest latency from vMix, output from your GPU. For best IMAG results you'd need to use hardware from end to end and not go through vMix.
@baagiibataa91213 жыл бұрын
vmix external renderer not found. I cant. help me
@niloyfirstrain8053 жыл бұрын
The Decklink card being quite expensive is it possible to connect the Atomos on the LAN and record via NDI output from vMix without the requirement to connect it via an SDI cable?
@vMixhd3 жыл бұрын
If the Atomos supports NDI input and recording, then I guess that would be possible.
@provocativelypure71054 жыл бұрын
Do I have to output my camera before causing it to work externally? I was able to go on zoom, but it didn't recognize my capture card. Please help. I have HDMI using El Gato
@vMixhd4 жыл бұрын
Hi, you could try outputting your vMix production with the NDI Virtual Input- kzbin.info/www/bejne/gIvaaZaXhKllsJI
@niloyfirstrain8053 жыл бұрын
Can I use a second vMix machine to record after outputting as NDI to reduce load on first vMix machine?
@vMixhd3 жыл бұрын
Yes, you could do that. You would just need another device that could input and record the NDI feed. You could use vMix, OBS or NDI Studio Monitor.
@mantenanyar85445 жыл бұрын
👍👍 indonesia
@ferdeso5 жыл бұрын
Cómo se puede reducir el retardo que hay en la salida hacia una blackmagic mediante SDI?
@HernanAdaro3 жыл бұрын
Hola José, tengo la misma duda!. Pudiste resolverlo de alguna manera?. Alguien más puede aportar algo al respecto? Gracias!
@edenle19534 жыл бұрын
How to export files Mp4 in vMIX ? please tutorial.thanks
@vMixhd4 жыл бұрын
Hi, this video goes over recording in vMix- kzbin.info/www/bejne/aWqzlYiYp9CgrrM
@johnnyobaje47133 жыл бұрын
Pls how can I stop my live video on vimx is jecking
@vMixhd3 жыл бұрын
Drop an email to our support team to take a look- www.vmix.com/contact-us.aspx
@047924150135 жыл бұрын
maximum how many cameras connect in novastar vx4s
@anaeboifeanyi55432 жыл бұрын
Can I use Blackmagic ultrastudio monitor to output video from Vmix?
@maldonadodani4 жыл бұрын
Does this work on Blackmagic Shuttle usb 3.0?
@vMixhd4 жыл бұрын
Hi, no that device is not supported.
@maldonadodani4 жыл бұрын
@@vMixhd thanks a lot! I appreciate your work 👏🏻
@maldonadodani4 жыл бұрын
@@vMixhd today I tried the Shuttle usb and it worked perfectly as an external output!