Volkswagen Golf Door lock cylinder repair and assembly tutorial

Repairing the door lock cylinder on a Volkswagen Golf Mark 4. The cam inside the barrel is the part that usually breaks. You can buy a replacement set online for a few euros/dollars. I would advise keeping your locks lubricated to prevent them from breaking in the first place. Thanks for watching. If you found this video helpful, maybe you could consider supporting my channel by using the ‘Super Thanks’ button below the video. Your support would be really appreciated, thank you ! Please comment, like and subscribe !.
~~~~ Recommended Lock Repair Kit ~~~~
As an Amazon Associate I earn from qualifying purchases.
🔑 Lock Repair Kit ~ amzn.to/3PnCc6B
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@gordonaddison435]

Thanks that was super helpful

[@screwsnutsandbolts]

Thank you very much Gordon !, I appreciate your support ! 👍👍

[@blackericdenice]

Dude, I was about to take my part to a locksmith. BTW, thank you for not playing stupid music.

[@screwsnutsandbolts]

You're very welcome :)

[@saraytorrentejimenez8174]

@@screwsnutsandbolts 0

[@EGrottendieck]

Dear Sir! This was the perfect video at the perfect time. Today I repaired my broken door lock and without your excellent tutorial the job would have been nay on impossible. With it: piece of cake! Thank you very much and keep up the good work!

[@screwsnutsandbolts]

Thank you very much for your comments. I'm glad it helped ! :)

[@giovannibontempi8082]

Best video I've seen on this topic. You show CLEARLY how to refit the spring which is the most fidgety part. Thank You

[@screwsnutsandbolts]

You're very welcome, thanks for watching ! :)

[@polyfusion]

Came here to post the same thing, other videos don't explain or show this most important part of the assembly.

[@screwsnutsandbolts]

Thanks very much ! :)

[@automaticfantastic]

this worked for my 2000 Jetta. You are a lifesaver. kind of scary that if you try hard enough, you can open the doorlock with a flathead screw driver.

[@taslimmartin9052]

Dear sir, Thank you very much for your beautifully clear and informative video without which I would have had to pay at least £75 to a mechanic. Instead of which the repair Kit cost me £4.50 from the local VW parts depot. I followed your instructions and it went very smoothly this is where the Internet really works well thank you once again for sharing.

[@screwsnutsandbolts]

You're very welcome, I'm glad it helped ! :)

[@Blamm83]

You were a huge help just now for our Lupo! And curse that spring..

[@screwsnutsandbolts]

Thanks for watching, it's quite awkward alright !

[@richardthompson6265]

You Sir are a legend , tried for ages with other tutorials but yours was the one, simplistic quiet and calm no fuss did it on the second attempt , I doff my cap to you Sir.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@JNikonT]

Hier hat jemand genau gezeigt worauf es ankommt. Klasse!

[@screwsnutsandbolts]

Thank you !

[@mohammedsalah9280]

You are genius that twist thing and how you did it is superfast and easy to do

[@screwsnutsandbolts]

Thanks !

[@muhammed6929]

Thanks bro you made my day, you were the only one who tells in detail where the spring has to be exactly 👍👍

[@screwsnutsandbolts]

You're very welcome 👍

[@martinwardle6695]

Great video. Clearly shows you what to do, and, no music!

[@screwsnutsandbolts]

Thank you very much :)

[@zacetto]

So, how much do I like the conciseness and clarity of this vid? I love it, as I am now using it, TWICE. I just wish the poxy, pattern lock kits which are seemingly made of damp shortbread, were as reliable and helpful as this video. They lasted all of six months. At least I know this info, kindly supplied, is spot-on. Many thanks.

[@MachineVersatile]

REALLY THANKS MAN! I was fighting with spring six hours! Finally ended this fight! Thanks!

[@screwsnutsandbolts]

LOL you're very welcome ! :)

[@MachineVersatile]

@@screwsnutsandbolts Thanks again. I know it's lame trying to put that spring on the right place but it was a bit frustrating. The key is use tailpiece. That means pushing spring with that and in the same moment moving one end of spring with screwdriver (or something else). Additonaly i had to cut ends in my spring about 1 mm also. That's why i needed so much time. You know i was afraid also to destroy my new tailpiece (by using this to push spring). However i fixed it and mounted in car door. Works good. P.S. My fingers hurt yet :)

[@screwsnutsandbolts]

Thanks for watching ! Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons. Your support will help me to continue and improve my videos 👍

[@richardharries5825]

It’s been a pleasure watching. Without any highly irritating background music being played. Great pop up on screen instructions. Although this would be better with some verbal instructions as well.

[@pietervaneeden2370]

Man, what a legend! My wife's car's barrel popped apart inside the door, so I had no idea how to reassemble it. Even with the clear instructions in the video it was a difficult job. Without this video it would have been impossible! Thanks for taking the time to record and post it. Much appreciated.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@mustangmaniac1983]

Thank you VERY much for taking the time to do such a great video, this was extremely helpful. Last week my lock cylinder pulled right out of the housing when I tried to roll down my windows using the key. I ended up pulling a junkyard door handle assembly, both inner and outer, to study them and use for parts. Tonight I removed my old lock and housing but thought I was screwed when some pieces popped out. I'm going to try again tomorrow to wrap it up but this really helped me understand how to put it all back together.

[@screwsnutsandbolts]

Thanks for watching. I hope you can get it fixed :)

[@orlandosilva9769]

Buen día desde Comodoro Rivadavia...por fin alguien que explique bien y de la manera muy sencilla...saludos desde Argentina

[@screwsnutsandbolts]

Greetings from Dublin, Thank you for watching !

[@kimj3353]

Excellent video. Really clear. No annoying music nor unnecessary comments. Thanks 👍🏼

[@screwsnutsandbolts]

Thanks for watching ! :)

[@paulpaul8932]

Best instructions I've seen and with detailed photos. Thanks,Danke

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@carlosm5226]

Pretty good video, Even for people doesn't speak English it's very understandable, thanks a lot My friend, grettings from México.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@frankbrejcha8928]

Fantastic video, will have to and try it on my VW Polo door lock which is knackered.

[@screwsnutsandbolts]

Thank you ! 👍

[@ScapeMusic]

I love my shitbucket Golf 4. the reason are people like u. I can repair literally anything because some lads post videos like you do. Thank you so much for this ez pz tutorial! 💪🏼 +5 tech karma

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@asayake1]

Thank you so much for posting this video! I've had to do this repair a couple times now on my Golf using parts from the junkyard. I use your video everytime. Works great and takes only 5 minutes!

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@kenmisterfish8717]

Thank you, a useful guide, I would never have worked out how it went back together without this video. I could not get the spring to hook over the second fixing, so in frustration I simply snipped off the ear that sticks out, then it was ten seconds to put in place.

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@s.w.7897]

Thank you so very much. I needed 3 videos to become able to repair my key. That spring drove me crazy.

[@screwsnutsandbolts]

Thanks for watching !

[@derekmoore1612]

You clearly show how to do it: unlike most of the out of focus, stumbling, uh uh uh people that need to take 1 class on how to shoot video. Thank you very much.

[@screwsnutsandbolts]

Thank you very much ! :)

[@joshh411]

Thank you. Perfect video!!!

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@jordanrafael7893]

I love you man I wasted two hours on this till I watch the video

[@screwsnutsandbolts]

I'm glad it helped, thanks for watching ! :)

[@eleme22]

The best explained, and easiest.👍

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@sunoclockoneday2576]

Best video for this job. Gets right to the point and easy to follow ✌️

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@gatemadness]

Legend! I tried to cannibalise together 2 faulty locks for a seat leon 2001 I bought last week and I couldn't figure out how to put it together again. Its now 3 am and I have 1 working lock instead of 2 broken ones, I am ecstatic!

[@screwsnutsandbolts]

Glad it helped ! :)

[@mgvacas]

Thank you very much from Spain, I was able to repair my VW Golf for only a few euros! Thanks!!!

[@screwsnutsandbolts]

You're very welcome ! Thanks for watching ! :)

[@shawnbeach1421]

This video helped me tremendously, thank you

[@screwsnutsandbolts]

You're very welcome, thanks for watching 👍

[@jpdore]

Great video! Had to consult it after freeing up my seized lock. I hadn't had a chance to see where the spring ends sat before it popped out on me. Thanks!

[@screwsnutsandbolts]

You're very welcome, glad it helped :)

[@TheEnyi]

Straight to the point, that’s how a to do video should be, well done.

[@screwsnutsandbolts]

Thank you very much ! 👍

[@SureshBopitiya]

Thank you so much for taking time to post such a great video. I've just bought a Mk Golf and the Drivers door wouldn't open. The key kept spinning in the lock. After watching your video I went to a wreckers yard found an old Golf and took the parts I needed. All works well now and it was a $7 repair!! Thanks again.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@herenow2895]

Thank you so much for uploading this video. I am needing to rebuild the lock for a VW Polo, but this is the same. All I have is a pile of broken bits that I fished out from the bottom of the door and no idea how it all goes together. Ordered the repair kit hoping it would either have a diagram or be self explanatory. But now I know what to do, so thank you very much.

[@screwsnutsandbolts]

You're very welcome, Glad to be of help :)

[@user-gy1yk5uz1w]

Tökéletes leírás, nagyszerű munka. Köszönöm.

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@highmee420]

Thanks bro... I was stuck for an hour & a half trying to figure this out when all it took was 5min to watch a vid!!

[@screwsnutsandbolts]

You're very welcome, I'm glad it helped :)

[@bertushd]

Very clear video. A bit desperate when trying to fix the doorhandlelock you video made it work here. Thank you very much!

[@screwsnutsandbolts]

Thanks very much ! :)

[@issacroberts8088]

Thank you very much for this video. I was able to assemble my 1999 Passat B5 Door Lock Cylinder. Although getting the spring to cooperate took several attempts.

[@screwsnutsandbolts]

You're welcome. It can be a bit difficult alright !

[@cintiavarga-szalai9356]

It's the same like VW Polo 9N, very helpful video! Thank's so much🙏☺️

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@RSSenda]

This worked for my 2013 Gol Trend. Thank you.

[@screwsnutsandbolts]

You're welcome, thanks for watching :)

[@electronicsystems480]

thank you I repaired my lock cilinder with this excelent tutorial

[@screwsnutsandbolts]

You're very welcome ! :)

[@user-ss2vm6ox1c]

Thanks had to refer to this again other videos were not as good got it done still took me hrs though there`s a knack to it

[@tails4944]

Glad I found this, I was struggling with the tail piece for a while.

[@screwsnutsandbolts]

Thanks for watching !

[@3ara3a11]

nareszcie cos jak poprawnie zalozyc sprzezyne

[@screwsnutsandbolts]

Thanks for watching !

[@Axeltreman]

Thank you for sharing your knowledge. Greetings from Mexico.

[@screwsnutsandbolts]

You're very welcome, thank you !

[@R1chardB1ngham]

Thank you for a nice clear, concise video. My lock failed today so I've ordered a repair kit

[@screwsnutsandbolts]

You're welcome, thanks for watching :)

[@lee13whitehead]

Top man, just fixed my broken lock! Thanks

[@screwsnutsandbolts]

You're very welcome, thanks for watching :)

[@keithwilkinson2688]

Perfect video. Had spent half an hour with the cam the wrong way round trying to fit the spring in place. Fitted to the door a few times before realising there was no respring in the lock 🙈

[@screwsnutsandbolts]

At least you got there in the end ! :)

[@davidkooi4349]

Just fixed my lock. Thank you for the video! Feels good :)

[@screwsnutsandbolts]

You're very welcome, well done ! :)

[@daroccot]

Same on Mk4.5 (city golf in canada) lock cylinder was completely seized had to heat with torch to burn off dried grease and corrosion paste. then tap out all the tumblers and soak cylinder in CLR to dissolve scale and corrosion... assembled with antiseize, works like new.

[@screwsnutsandbolts]

🔑 Lock Repair Kit ~ amzn.to/3PnCc6B

[@matjusss]

thanks for this video i fixed my lock door VW polo 1998, thanks ScrewsNutsAndBolts

[@screwsnutsandbolts]

You're very welcome !

[@RoommateJudd]

Great video!! Helped me a lot vw Polo 6N locks are nearly identical

[@screwsnutsandbolts]

Thanks very much, glad it helped ! :)

[@TheJavierTrejo]

Thanks for this video!! It’s the best one and is clear and exact. Fixed my door and saved 200.

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@ChileThailandtravel]

I enjoyed watching. good lesson to learn.. This is what we all need. to learn how to repair. thanks a lot..

[@screwsnutsandbolts]

Thank you ! :)

[@sdwarfs]

Thanks... this was very detailed and easy to comprehend. I feel very comfortable to disassemble my lock cylinder now... Have a great day! 🔥🔥🔥

[@screwsnutsandbolts]

You're welcome. thanks for watching !

[@israelgp5080]

El más sencillo y el mejor que he visto. Mil gracias

[@screwsnutsandbolts]

Gracias ! :)

[@RED-qj6pi]

Amazing demonstration! Saved me much frustration!!

[@screwsnutsandbolts]

Thanks for watching !

[@johnwaugh365]

Thank you so much for this EXCELLENT video. The camera work and detailed instructions made is easy for me to see where the spring needed to go and how things fit together correctly. I was able to fix a lock cylinder very similar to the one in the video because of your excellent work here. Thank you very much.

[@screwsnutsandbolts]

You're very welcome ! . Thanks for watching :)

[@coterraneo]

Repuesta en español no se entiende inguna huevadas

[@m.m.9198]

Sencillo y ameno video. Thanks you!

[@screwsnutsandbolts]

You're welcome !

[@ARGHDEHN]

Thanks for this! just saved me loads of time!

[@screwsnutsandbolts]

You're very welcome :)

[@lamatrix9848]

El mejor video que he visto para reparar una cerradura de vehículo, sencillo y muy práctico.. gracias a éste video reparé las dos cerraduras de mi Skoda del año 2000.. muchas gracias.. 👍

[@screwsnutsandbolts]

You're very welcome, thank you for watching 👍

[@0921zorro]

Thank you great video. The skoda fabia 2002 door lock is exactly the same.

[@screwsnutsandbolts]

You're very welcome ! :)

[@TheMoonCatcher]

You are the best. I already wanted to throw this door lock at the wall

[@screwsnutsandbolts]

lol :) You're welcome !

[@craziest83]

Thanks mate, you saved my life!

[@screwsnutsandbolts]

You're very welcome ! :)

[@pokriv4243]

Clearest tutorial on youtube, thank you!!! I will try with my seat arosa, i think it has the same keylock

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@gasparromerovaccaro3568]

Excelente! Me ayudo mucho, de no ver este video no entendía como armarlo, al ver el video lo hice en minutos! Gracias. Saludos!

[@screwsnutsandbolts]

Thank you ! :)

[@pr0xZen]

Thank you for this. The bottom cam piece on my driver door 99 B5 Passat was broken, some of the parts are a tiny bit different but overall practically the same. And the repair kit I got was slightly different too, from the original. There are other videos around, but this was straight to the point and showed it well in good detail. If I could make one small suggestion (for future content, this is very good as is), it's to show stuff like the cam pieces a little bit more, from more angles, so viewers can see the full shape a little bit better. And maybe the position of the actual key/lock cylinder and the sleeve around it inside the outer casing, as it won't go together unless it's at the right angle and the pin-thingy slides down into the small, deeper recess. It could be useful for those that have taken the cylinder out for re-keyring or a full overhaul. That's what I ended up doing when I saw what an absolute stuffed mess the inside was like. Never disassembled, overhauled and rebuilt a wafer'esque lock cylinder before, so it took some time but in the end worked out ok. It was so full of watery oil-goop and grime that the all thebwafers barely moved when extracting the key; had to leaver and pull them out with a pick and pliers. If anyone needing to do this reads this post: Yours might not be as sticky so take out the key *VERY* slowly. They're spring loaded and only held in by the key going through them. So hold your finger over them and extract one at a time. Make sure you mark the cylinder in a way that doesn't come off when cleaning it, and lay the wafers in the correct order so you can't accidentally knock it and mess it up. And note down the numbers, their sequence and positions; it's stamped on the wafers. This way if younever lose your keys and you need a new key cut to get into the car, you can get that cut at any practically any locksmith, from the wafer number sequence. It won't have the chip for the immobilizer, but at least you can get inside. If you do mess the wafers up, it's not the end of the world, there's only a few of them, and you can figure out which goes where by doing them one at a time with only that one wafer in one spot in the cylinder. You don't need to hassle with keeping all the other wafers in check in the cylinder while testing. Insert the key fully, and check that it goes flush with the cylinder (on both sides), or barely sticks out 1-0.5mm under the spring tension and will go flush with a gentle push. Also be extremely careful when working with the springs. They're so small and light that they'll stick to stuff just by static, but they're still springs so they'll f**k off on you if you barely look at them too long - never to be seen again. Long story short, my lock cylinder now has one less wafer (do not install wafers without their spring! They won't return to position properly and can jam your cylinder). If you lose a spring and don't have spares, leave out a wafer when reassembling it. A bonus after having done this once - I now know it's frankly quite easy to "re-pin" these types of locks and sets of these wafers are cheap on AliExpress and Ebay. So if I'm ever in a position where I have a car with these locks, that have different keys for different locks because of a former used-parts repair (or I need to do one) - I can save a lot of money by just re-pin in the other cylinder(s) to fit the ignition key.

[@mikeogilvie6949]

Mmm! Sounds like a nightmare!!

[@pr0xZen]

@@mikeogilvie6949 It's really not that bad, there's just a few pitfalls to avoid. And I explained it as fully as possible so that anyone reading can do it, and understand what those pitfalls are, how they work, and how to avoid them so they _do not_ become an issue that you have to struggle with fixing. It ended up a long read, but hopefully a couple of minutes reading can save you hours of trouble. At its core, the primary "challenges" and how to avoid them, is going slow and bring patient when disassembling it so the springs don't fly off, or you miss / forget what sequence the wafers were in. Once you got the cylinder out with the key inside, keep one finger pressing down on and covering over the springs and wafer tops. The wafers have holes in them that the keyblade passes through. The springs tension each wafer so that they return to the right position when there's no key in them. The outer cylinder liner stops the wafers and springs from going anywhere. But when disassembling the cylinder you remove this outer cylinder liner. That's not an issue as long as the key is still inside the cylinder, since the keyblade penetrating the wafers keep them from moving. However, when you withdraw the key then, the wafers and the tiny springs that tension them are no longer blocked by the outer sleeve and they're free to spring all the way out. Thus, use a finger pressed across the top of the wafers and springs to do the job of outer sleeve. Then once you pull the key out from one wafer, lift the finger across the top of them slowly (!), so that you stay in control of releasing the tension on that wafer/spring combo, doing one of them at a time. When resssembling the cylinder, you do the same just in reverse. Input a set of springs, the correct wafer on top of them, press it down and push the keyblade through the wafer. Once the keyblade penetrates the wafer, they are locked in place and cannot go anywhere unless the key is withdrawn. As you do this, put the springs where they can't get lost or bumped (a jar, on a piece of sticky tape etc), and lay out the wafers in the order and orientation you take them out. If possible, write down the number on the side of each wafer as you go - then if they do get mixed up you have the sequence written down. Write the sequence down and store somewhere safe (not!!! inside the car). Then if for some reason you were to lose all your keys for it, you can get a new one cut from just the sequence so you can get inside the car, put the ignition in ACC and undo the steering column lock. From there new immobilizer chips can be programmed. This way you can get new working keys from a no-keys stsrting point, without needing a flatbed tow, breaking a window, installing all new lock cylinders, and new instrument cluster/ECU/Immobilizer. If you're still afraid the springs will f00k off on you, then stick either just the cylinder (w/key in) or your hand holding it, inside a clear plastic bag while disassembling it. If doing it like this, it might not be practical to withdraw it from the bag for every wafer extracted so you can place them out in sequence, but you should be able to read the stamped or laser etched numbers on them through the bag. So just note down the sequence they come out and follow that note when resssembling it. - If you mess up the wafer sequence, there's really not that many wafer sizes and placements. Nor that many possible combinations; it can only be a sequence combination of the wafers you already have. And for each wafer you get right, the number of possible combinations goes down very fast. It's not just a guessing game either, you can clearly see if the top of the wafer goes roughly flush with the cylinder body once the key is fully inserted. Just start with the wafer closest to the key hole and predd they key all the way in. Once you have a wafer in that spot that sits roughly flush with the cylinder body when the key is fully in, pull the keyblade back out but only so far that it still penetrates the wafers you have gotten right, then rinse and repeat until you have them all in correct place. Write down the wafer number sequence as you go, should it happen again later. If you have a set of suitable tweezers for pulling the wafers out manually, you can do this process without the springs in, reducing risk of them flying off while you keep inputting and extracting wafers to figure out the sequence. Or, do it inside the plastic bag.

[@kub1061]

the easiest way to do this ! I wish I had found it earlier !! Great job

[@screwsnutsandbolts]

Thank you !

[@harryso5121]

It was really helpful and I fixed it. Thanks Mate

[@screwsnutsandbolts]

Excellent, glad it helped you ! :)

[@anxose]

congratulations from Spain ..you are like no one on you tube ...has estado perfecto...ahora a buscar un cilindro en buen estado de desguace.

[@screwsnutsandbolts]

Thank you very much ! :)

[@tgraney11]

Thank You, worked great!

[@screwsnutsandbolts]

You're welcome ! :)

[@garaza24]

Thank you for detailed video.

[@screwsnutsandbolts]

You're welcome !

[@schnitzer434]

So easy on the video So hard in the real life P.S: I am experienced technician engineer

[@fazolenaostro7818]

Thank you, it was very helpful.

[@screwsnutsandbolts]

You're welcome !. Thanks for watching !

[@sebastianleonardogonzalez8769]

Excelente!!!! Muchísimas gracias por compartirlo 👏👏

[@screwsnutsandbolts]

Gracias ! 👍

[@ernestosoto667]

Excelente video, la verdad ayudo bastante,ya que por fuera cobraban bastante dinero, solo compre el repuesto y quedo como nuevo.muchas gracias.

[@screwsnutsandbolts]

Thank you 👍🏻

[@paganini641]

Excelente video and tutorial, help me to repair my vw conductor Door, Thanks from 🇨🇱

[@screwsnutsandbolts]

You're very welcome, thanks for watching ! :)

[@jakobkellner6242]

Superb Video, I'd like to give three thumbs up.

[@screwsnutsandbolts]

Thanks for watching ! :)

[@ThomasMehiar]

Thanks! Excellent video!

[@screwsnutsandbolts]

You are welcome!

[@dimitriskotsopoulos2979]

Thank you very much for your help,both the doors on my polo are shot and thanks to your valuable advice the locks are like new now. All the best to you, liked and subscribed.

[@screwsnutsandbolts]

You're very welcome, thank you ! :)

[@Outback-wu8yi]

Buen video. No sabía que era reparable. Gracias.

[@screwsnutsandbolts]

Thank you for watching 👍

[@user-zd8sf9ew9o]

Thanks a Lot. Excellent video. it was very clare for me.

[@screwsnutsandbolts]

Thanks for watching !

[@LaoMa9]

Perfect explanation!

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@hassankarriti]

Helped me a lot , thank you so much

[@screwsnutsandbolts]

You're welcome !

[@manuelsanchez-xp3ss]

Excelente vídeo me ha ayudado mucho gracias por compartir tus conocimientos

[@screwsnutsandbolts]

Thank you for watching ! :)

[@cinarilhan7088]

Danke schön 🙏👍

[@navarrogodinezirvingabraha2470]

Nice job!! Very very simple !!! Congratulations from México City

[@screwsnutsandbolts]

Thank you very much ! :)

[@Lolopot]

Sabes como se le hace para mover el resorte? Me está costando mucho trabajo

[@carlosalbertomunoz7930]

good video, thank you very much for your help, greetings from Guadalajara Jalisco Mexico

[@screwsnutsandbolts]

Thank you very much for watching ! :)

[@ricardofabianrosas2326]

Thank you very much fron Argentina

[@screwsnutsandbolts]

You're very welcome, Thanks for watching !

[@GreekOrc]

Thanks for the tutorial

[@screwsnutsandbolts]

You're welcome !

[@AlexanderDreyer70]

Thank you for this Video.

[@screwsnutsandbolts]

You're welcome !

[@Efendi601]

Danke für das Detailierte Video. Richtig gut erklärt habe eine Menge Geld gespart durch dich. MEGA

[@screwsnutsandbolts]

Gern geschehen 👍

[@predragpedja8636]

Well done, Thank you very much

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@andreigebauer9893]

Wow! I wish I saw this video first! The other ones were pretty crappy... getting the spring to fit in the right places was a horrible pain for me! I can't believe you did that with your fingernail 😱😱🤯🤯

[@screwsnutsandbolts]

Yeah it's quite awkward ! 🙂