Volvo 940 B230 FT Engine Sound - Garrett Stock Turbo

The latest Garrett Factory Stock Turbo video.
Wiseco Pistons (CR - 8.6:1)
K1 Connecting Rods (I-Beam)
Full 3-Inch Exhaust (Exhaust Manifold)
Tial 44mm EWG
3" 012 MAF
550cc Bosch Injectors
AEM 340LPH Fuel Pump (Hardwire Wiring)
High-Flow Fuel Rail
PQY-7855 Adjustable Fuel Pressure Regulator
Do88 -TR-740-S-63 Connection Pipe Kit
PQY-TK64 Oil Catch Can
Bilstein B6 Shocks
Lesjöfors -40mm Coil Springs
AFR (AEM + LSU 4.9),OP, EGT+ BOOST Gauges etc...
EPMAN: 76mm Air Filter, 100 Micron Fuel Filter, 50mm BOV
Chip-Stoni (LH 2.4 + EZK)

[@Volvo760T]

Sounds sick

[@kishmick]

Thanx👍

[@joni9457]

sounds same as my stock fk with open airintake :D

[@raisumies8973]

Mulla kuuluu vaan tshhhhh ja jos ottaa bypassilta yhen letkun pois ni sitte tsututuututut...:D

[@joni9457]

@@raisumies8973 eipä niitä kannata repiä sieltä irti jos ääntä haluaa ni rakentaa sitte koko vehkeen😂

[@raisumies8973]

@@joni9457 Ihan kokeilumielessä olen kerran ottanut. Suunnittelin erillisen bypassin asennusta...

[@dovreboy1992]

how does it like the open dumpvalve ?

[@kishmick]

Hello! The dump valve is not yet on the video. What is heard is compressor surge. I did it by completely blocking the blowoff valve which is directly on the turbo. Now I have a really big dump valve on my car. But for that I had to put the MAF before the throttle(with the LH 2.4 Unit).

[@dovreboy1992]

@@kishmick so you had to mount the MAF on the IC pipe insted of the air intake?

[@kishmick]

I put the MAF between the throttle and Blowoff. Then Blow off works without problems. forum.volvoklub.cz/viewtopic.php?t=78321&start=150

[@davidsny1190]

Do you have a part number for that air filter?

[@kishmick]

Try writing something like: EPMAN Universal 3" 240mm Auto car Race Sports Intake Air Filter Cone Filter Cleaner Vent Crankcase Car Styling EP-AF002G

[@davidsny1190]

@@kishmick hahaha nice thanks 👍🏻

[@kylekendall2306]

What is your fuel rail setup?

[@kishmick]

Fuel rail from Aliexpress. Injectors 550cc: Bosch 0 280 158 279 (You have to make an extra groove there.) Chip: Stoni www.stonis-world.com/

[@ossianfalkman7457]

my b230ft doesnt sound like that

[@querlymodz5540]

How much hp?

[@kishmick]

In this video it was around 250HP because the little Garrett T25 turbo won't do much more. I have now put the GT3076R in the car, but again I have a weak M46 transmission. It will still take some time to reach 400HP :-)

[@mumenbeats]

@@kishmickive heard the m46 isn’t too strong of a tran, do you think it could take 300hp?

[@kishmick]

@@mumenbeats Now I have a GT3076R turbo that puts out 1Bar (that's 300HP for sure) and thankfully the M46 still holds together. But right now I am buying a new trans-Getrag 265, it is strong enough for 600HP. Thanx.

[@AplicareAbdulKarim-bx7tq]

Jh