Volvo BM 430T : Splitting it in half, replacing clutch and PTO-clutch

[@marhete5]

Thanks for this video! I have just started restoring my father's old t430 tractor. That much I know that the engine is not stuck, been outside for 15 years 🙂 Greetings from Finland!

[@Foffe2000]

good! we are both restoring an old 430 for our parents then 😊

[@cullenmiller8170]

Good to see you are doing well. I hope you had a good summer. I remember splitting tractors in the 80's when I was an apprentice at Deutz and Fendt dealers in Germany. I have been waiting for an update on some of your Mercedes projects. I sold my W140 turbo diesel and scrapped the parts cars.

[@Foffe2000]

Hello Cullen , the summer have been real nice with lots of vacation. And i got lots of projekts ive been fiddeling on but i dont film them all since that part takes alot of time, so i try just to film things i think might be interesting for others. You told me about your W140 cars, its never to late to get another one (or some other cool old benz)

[@alex-qj2yh]

Du är en mekanisk Mozart! Stort tack för dina videos.

[@Kyokunek]

Thank you for the effort of using english. There are many swedish channels which i like a lot but very few are using captions so i can't autotranslate and therefore i dont understand 99% of it..

[@V70170]

Nice video and you are a skilful mechanic. Nice job. My father also had a 430 since 1972. Greetings from the Netherlands

[@ChokriMensi-vo9dj]

Väldigt bra jobbat Och väldigt lärorikt

[@SImpleeSTARstruCK]

happy to see a new video ! Cheers

[@Foffe2000]

Thanks

[@alexanderdolerud6764]

Aldrig sett en dörr som är delad på de viset. Klart du ska filma mer 430, iaf gärna mer lantbruksmaskiner önskas.

[@Volvo242-m9z]

Tack för att du lärde mig deta ska renovera min 430 för den läcker olja hela tiden sen ska jag renovera min IH 250 just nu renoverar jag min 242 som är en a-traktor så jag kör med 430 till skolan men snart ska jsg köra 242 när rosten är lagad😅

[@magloman]

Good work! Nice video.

[@Foffe2000]

thanks, i to think it came out good

[@MickeyMishra]

is it just me or does this tractor look like the ones in the Cars Disney movie which were the cows that Maynard and Lightning McQueen were scaring?

[@plisken8799]

Bra jobbat.

[@haptus1]

Hi, What tool are you using at 30:00 when adjusting the bolts? does it have a name or is there an alternative to that?

[@Foffe2000]

its just a measuring tool to get the right distance of the pressure-fingers of the pressure plate. I dont remember de right distance but you can find it in the BM430T service manual.

[@haptus1]

@@Foffe2000 Thank you very much, we found a solution, do u by any chance remember the amount of Torque for fastening the clutch to the flywheel? (newton meter?) i cant find an English version of the service manual and my Swedish is not that great... :)

[@Foffe2000]

@@haptus1 no sorry, and i dont got the service-manual on me, i sent it along when delivering the traktor back to the parents place. Have you found a Swedish manual ? heres some translations of the parts you are dealing with : "tryckplatta" (flywheel pressure plate) "lameller" (clutch-plate) Svänghjul (flywheel) Vevaxel (crankshaft)

[@Foffe2000]

i did find this info on a website (in swedish) that claims 10,3-11 KP/m on the flywheel to crankshaft, and 2 KP/M for the clutcplate to the flywheel. But i am not sure about it since its just from a random website ( www.ingemarlindblad.se/sida220.htm )

[@haptus1]

@@Foffe2000 Hi Again, been a while :) we got it changed, the tractor changes gears, but now the PTO Clutch is making some weird noice when depressing the clutch all the way, like a grinding sound. Did u at any point adjust the bolt between the four springs at 23:10, Not sure what it is called but from my rescearch this should adjust the PTO clutch... Thanks again! :)

[@acajutla]

Tack för en intressant video. Kanske försöker kopiera bockarna du använde som stöd vid delningen av traktorn. Det lilla stålbordet verkar också användbart. 👍👍🍺

[@Foffe2000]

Ja dom där är behändliga, har en annan video där jag använder samma bockar för att delar en Volvo 4200a för omsvarvning av midjan, så dom tål bra med vikt

[@hilmanorrman9375]

Vet du var man fyller olja till krafttaget på BM 430

[@Foffe2000]

Hänger inte riktigt med på frågan, Kraft-uttaget är inte hydrauliskt driven mig veterligen? En av kopplingarna (kallad PTO-clutch i videon) är mekaniskt driven från motorn genom kopplingen och vidare hela vägen bak till kraft-uttaget, visst är den smord för att minska slitagete men det bör vara samma olja som för bakaxeln och trepunktslyften

[@vaette]

Oho, didn't know you were filming this project, interesting!

[@Foffe2000]

tought this would be interesting enough for youtube, but i wont film all the other "fixes" on the tractor

[@bolarsson9438]

tack för videon du bytte inte packboxen å ?

[@Foffe2000]

NEJ! å de va nå så mycke korkat (jag tänkte helt enkelt inte på det) Det var ju i flera år en knäck på bröstkåpan mellan växellåda å vevaxel på grund av att hälften av bultarna var av där. Jag var duktig och fick ut alla trasiga bultar och satte in nya. Vad händer när allt linjerar som det skall å dumbommen aldrig bytte packbox? Läckage! .. då kände jag mig riktigt dum.. men jag fattade mod och köpte såndär dyr packnings-rekonditionerings-jox å hädde i oljan .. å efter nån dag var läckaget borta. Men självklart skulle jag ju bytt packbox när jag hade chansen, tänkte bara inte så långt.

[@havardhellervik4827]

Hei Foffe, den clutch sentreringstappen, er det en spesiell for volvo BM ? Er den å få kjøp noen steds ? Håvard

[@Foffe2000]

Hej, nej det är inget specialverktyg utan ett verktyg jag svarvat till själv. Har inte måtten i huvudet heller tyvärrr

[@kollle1]

Varför fyller man olja i insugs skålen där?

[@Foffe2000]

Det är en oljefälla, luften som sugs in mot motorn måste göra en skarp sväng längst ned i denna burk, tyngre partiklar som följer med luften skall inte klara den svängen och landa i oljan och bli kvar där, efter denna är det ett väldigt grovmaskigt filter i stål som jag tror blir oljebemängd och även då fungerar som ett klibbigt skydd och fångar upp damm och liknande.

[@kollle1]

@@Foffe2000 okej =)

[@gorannilsson1366]

Kanon trevlig film👍👍💯😊

[@Tomi4170]

Nice video, i have same kind of 430 that your parent's have. Question about the front axle that where it from because mine 430 has different looking? Also i would like to know where the back of the front lifts base part goes because im making my own version of it. Or mine front axle is different that everyone else 😂 I recommed more videos of this Volvo BM 👍

[@Foffe2000]

Maybe yours is yellow? then its an "industrial" BM430, they got sturdier front axles and front lift.

[@Tomi4170]

@@Foffe2000 the paint has scrapped off and there is yellow so the front axle might be from industrial thanks 👍 How about that your frontlifts base brackets back attachment point where it does go? I'm doing an DIY frontlift to my own so it would be nice to know.

[@Foffe2000]

@@Tomi4170 on this one , a "ÅLÖ Quicke" its mounted right above the front axle (excisting holes that are not used) and also about where you have you feet inside the cabin (same mounting plates as the cabin bolts on to) , ive seen front loaders that also are attached underneith the tractor back to some mounting holes at the back end, probebly to even out the load/stress a little bit more

[@Tomi4170]

@@Foffe2000 thanks for your answer. I have to think is that even neccesary to have that type of middle attacment point because i will make to attach from the back of tractor also. You are right that it is better for the tractor to spread the points away from each other and i think this is the cause of your Volvos bolt break.

[@G1ordi]

Very instructive video! I like the trestles you use, have you made them yourself ? If so is it of your own design?

[@Foffe2000]

you mean the axle-stands? They are home built. Originally for another video "Volvo 4200 wheel loader" witch i splitted in half and line boarded the waist. My own design

[@pererikeithunronning9637]

Grymma bockarna du använder under som stöd.

[@Foffe2000]

Ja dom e fin, vill minnas att ja provbelasta dom med 5ton styck innan användning, har en annan video där jag renoverar midjan på en Volvo 4200hjullastare (finns här på youtube) där använder jag samma bockar för att justera in höjden vid rivningen av den maskinen.

[@pererikeithunronning9637]

Du får höra en video som visar de närmare ock med lite mått etc. 😌