Volvo S40 1.6D Anti-Skid Service Required fault 1517 and reduced power. Fault finding and repair.

[@carlarthur4442]

I've owned a V50 1.6 D 2010 and experienced quite a number of issue's as described, now got a engine reduced power, and then it cuts out , does re start but was told its probs with the e c u so I've got it booked in next week to get checked out on a diagnostic machine, hope they can fix the prob , 👍 sometimes it's just best to buy a car with less electronics on , get back to basics , I've spent a bomb on mine had it 7 years , looking at getting something more simple . Great information by the way , thank you .

[@LMAutoRepairs]

☺️ Good luck! 🤞 👍👍👍

[@davidcanas7116]

Thank you, sir! Same problem today with my 2007 V50.

[@LMAutoRepairs]

😊 👍👍👍

[@pharaon334]

Hi all, just fixed anti-skid and check engine error. In my case the problem was in EGR valve. Volvo s40 1.6 diesel 2006.

[@LMAutoRepairs]

That's great! Thank you for watching and for the feedback! 👍👍👍

[@adams9122]

@@LMAutoRepairs BCM-U010000 BCM -C004087 ECM - U032200 please could you help with these

[@stiofanmarshmcmahon]

Exactly what is wrong with my S40, mechanic couldn't diagnose it, thanks man.

[@LMAutoRepairs]

Stiofan Marsh Mc Mahon I am not a wizard!... lol Do you have any codes on the engine ecu? What are the symptoms?

[@adams9122]

@@LMAutoRepairs can you help me please with some codes??

[@adams9122]

BCM-U010000 BCM -C004087 ECM - U032200

[@LMAutoRepairs]

What has been done to the car? Those are communication and/or software incompatibilities... Was any modules replaced? Thank you for watching!

[@adams9122]

@@LMAutoRepairs no nothing has been replaced , I had anti skid service required and immobiliser start again, car cuts out when driving ??

[@jozzerful2]

By the way you do not speak I like the way that you explain everything so don't change trust me

[@javiedsharif7784]

One of the cars I maintain Personally, great video thank you for the share.

[@LMAutoRepairs]

Thank you for watching!

[@adams9122]

@@LMAutoRepairs Hey can you please help 🤞🏼 I have a Volvo s40 2012. Anti skid service required “ message appears and my car completely cuts out. I close and open the car with my fob 5 times abs I can drive again. I can drive up to 70 miles and it will happen once and then happen again a few more miles, any ideas what this could be please, would appreciate any help LUCY.

[@ДмитрийТукало-л6о]

@@adams9122 Здравствуйте! Вы решили свою проблему, anti skid service required, если решили то как? У меня сейчас проблема схоже с вашей решение еще не нашел.

[@drontym1221]

Thank you very much for video. I having same issue and hope I can sort it out

[@LMAutoRepairs]

🤞 Thank you for watching and for your comment!

[@houseofacademicexams1450]

Hi, I had that reduced engine problem for a month and it appeared after anti skid service required notice. I have been having a problem with 'Anti-skid service required' and 'reduced engin performance' for a while and went to my mechanic to fix it. They said it is a sensor problem and did nothing. The Anti-skid service required' goes off but 'the reduced engin performance' still remains. Today in the morning the car stopped and didn't turn on because of the following errors: 1. Break failure stop safely 2. SRS Airbag service urgent. 3. Anti Skit service required And soon after showing these errors the immobilizer stopped the car and turned off the ignition. I searched a lot and it could be any problems like the sensor, a valve, male and female connectors or even battery. I need your help. Usually, when the ABS anti-skid service required message appears, it could indicate a problem with one or more of the components of the brake system, such as a malfunctioning wheel speed sensor, a problem with the brake control module, or a problem with the brake pads or rotors

[@LMAutoRepairs]

Without scanning the car, and analysing live data, you will be working blind... Get it scanned and live data checked first... 👍👍👍

[@luisgonzalez-hf5nf]

Hi, same car volvo 1.6d 2007 190.000km from spain, same problem (antiskid service required) and same solution, turbo boost pressure solenoid (56€ bought in my local dealer)

[@LMAutoRepairs]

👍👍👍

[@fatixnet]

hi, i have this error too. The things you mentioned are correct. I've been suspecting the valve for a long time too. Today I found you while looking for the solution of the anti skid service article. and backed it up in retrospect. So do I change the valve?

[@rotlichtbetrieb]

Thank you for posting this exceptional video. Same trouble with our 2006 V50, 1.6D (360.000km). Your video was the 1st with information on how to troubleshoot the issue. Greets from Germany Axel

[@LMAutoRepairs]

Axel Oberbeck That's great! Hope it helps you to get it sorted! Thank you for watching and for your comment!

[@jasonwade2277]

Yes, that guy who made a comment , below my comment saying do not concern yourself regarding repeating because that is a good thing it means we hear it more than once, and it means the information stays in our head so to speak, see how I keep using ,so to speak a lot , lol.

[@LMAutoRepairs]

🤣🤣🤣 We all have our things...😜 👍👍👍

[@jozzerful2]

What you are saying is exactly what is happening in my Volvo 1.6 diesel, but when I turn off and on the key when the engine is on but the turbo gives way more power than I know it should and you can hear a whistle coming from the turbo, sometimes the light will stay off for a while, and will come back on, but even when it comes back on it will still will drive fairly well the revs do not stop at 3000and if you did not know that the car was meant to be giving you more power you probably wouldn't realise, the engine has been very well looked after and has a very good service history, do you think it is safe to say that this is my problem?, And can you gain access from like you did? I am due for my NCT

[@LMAutoRepairs]

Hi Have you scanned the car? If the engine light is on, there will be codes... Thank you for watching!

[@jozzerful2]

@@LMAutoRepairs By looking at all your videos and the fact I can turn off and on the key and the turbo gives more power than it should and even when the light comes on I still have good power i am 99% that it's what you said, because Sometimes all the lights go off, and the car is on usually clean has a very accurate engine bay spotless cleaning all new brakes brake discs all wiring is new original so if I changed this and that was the problem would the lights correct themselves or do you have to do it I computer and on average how much would you say if costs if I supplied that part for someone fit it roughly I'm in Ireland

[@LMAutoRepairs]

The lights will stop coming if you sort the issue... the faults will still logged in the ecu, but that is not an issue... Still, would worth a scan before you start to throw parts at it... The parts cannon can become very expensive, very quickly! Hope you get it sorted! 🤞

[@kingofthehill1able]

I changed my turbo. But before that anti skid was shown. Engine light on. Limp mode but sometimes run normal ?

[@benjaminlevi7792]

I really like your job and Use your best vedio everyday when I comeback at work the first time I visit your page for watch the new vedio hahahahaha thank you

[@LMAutoRepairs]

😊 Thanks!

[@dickharddorkings642]

Just bought a car (Volvo C3 1.6 d ) anti skid warning then loss of power in 2nd gear - which valve di you change out please ? was it the EGR vavle ? thanks for the video

[@LMAutoRepairs]

No... I explained in the video... Thank you for watching!

[@setitthen]

the blue point micro scan 3 has an excellent graphing ability not as good as the maxi scan as a complete tool but the graphing function is second to none plus it works with shopstream connect

[@LMAutoRepairs]

setitthen Thank you for watching and for the comment!

[@TheUnknown-di9vb]

Hello mate, having the same issue with a 2008 Volvo C30 1.6D - abs not communicating with the diagnostic device. Car drives but feels like in limp mode struggling to get to speed and eventually the anti-skid service required and then engine performance reduced signs come on and car releases lots of thick black smoke from exhaust when accelerating but the signs disappear when car turned off and started again. Had a new DPF and turbo fitted but problem still persists. Would you recommend anythinh else? Are you based in the UK? If yes, where abouts? Thanks

[@LMAutoRepairs]

What codes on the engine? The anti-skid will come up is there is issues on the engine that affects the engine torque etc... 👍👍👍

[@cedo-mv8kl]

Thanks from Serbia.

[@LMAutoRepairs]

☺️ 👍👍👍

[@NotSoBrown]

Same issue 2004.5 s40 fwd 2.4L but no turbo and no power loss or limp. Just no abs or cruise

[@zigzag7194]

Ahh so this is why I'm losing my cruise control .. did not know that and my car is going into limp mode and I'm getting a lot of lagging. Now I just need to find this valve👍🏿

[@ducipal1st]

I might have the same problem. some errors are coming up as not communication with ECM BCM-0101, BCM 0100, BCM 0101, Communication between control units, Communicational problems with ECM...AntiSkid. ABS... Quick fix is opening up the ECM moving up and down and all good. I suspect a bad connection. I will removed it and give a good clean to all connectors. I would look into the Turbo Pressure Solenoid Valve, but I do not know where is located.

[@LMAutoRepairs]

ducipal1st Hi The valve is bolted at the back of the engine... Thank you for watching!

[@evostik1]

Hi, I have exactly same problem with s40 1.6d, did you get sorted?

[@adams9122]

And have these codes also, any know what can be done to fix this

[@kkoo4284]

Hi man thanks for this, same problem same car . And can I ask you how do you check turbo control valve . I check it with hand hold vacuum pump,valve it doesn't hold vacuum(I thought it faulty ) and I bought second hand one and doesn't hold vacuum as well . And third one still doesn't hold vacuum . Should I buy a new one instead second hand one .

[@LMAutoRepairs]

Hi Have try them on the car? Depends how you test them, they not hold vacuum... Thank you for watching!

[@kkoo4284]

Ho thanks for quick response .I tried on the car . But it doesn't solve the problem . I watched quite a few valve test on here . Boost control valve they all hold vacuum . I just wondering that is my valve faulty . ? But I bought 2 of them (second hand ) . They all not holding vacuum . Not sure need to buy new one or not . Thanks .

[@LMAutoRepairs]

They should old vacuum, providing you are test them correctly... but you have done your home work by searching on how to test them... Go new, that way you know is good... Remember, that you can also have vacuum leaks on the pipe work etc... Let me know how it goes...

[@o60min59]

Hi please suggest, no power, have anti acid error but no engine errors. The following codes appear and no connection with abs and ECU. Volvo xc90 2011, diesel d5: The following systems is abnormal: ABS (Anti-Lock Braking System) 2 problems exist 1.ABS-0109 Communication Between Control Modules. Communication With The Steering Angle Sensor. Internal Fault. 2.ABS-0108 Communication Between Control Modules. Communication With The Steering Angle Sensor. Control Module Not Initiated. CEM (Central Electrical Module) 2 problems exist 1.CEM-9C03 Antenna / Light Ring. Signal Missing 2.CEM-1F00 ECM, Software. Faulty Signal SAS (Steering Wheel Angle Sensor Module) 1 problem exist 1.SAS-000E Steering Wheel Angle Sensor. Internal Fault

[@LMAutoRepairs]

Check powers and grounds... Check communication lines, checks connectors etc... 👍👍👍

[@olegoleg5529]

Hello ,i have volvo v50 2.0D , have anti-skid service and after my car stop drive for sometime and come another mistake (storing remsyst. stop auto z.s.m what isit?

[@alisanandaji2898]

Hi, can you tell me where your're based as I'd love you to look over my 2008 V50.

[@sanmirufus7888]

Hello, what is the cause of brake failure, ABS, anti skit and engine light on 2012 volvo s40. Thanks

[@LMAutoRepairs]

Engine issues can influence the performance of the ESP (anti-skid), that's why they sometimes iluminate at the same time... Scan the car, and go from there... 👍👍👍

[@sanmirufus7888]

@@LMAutoRepairs Thanks a million for you replay. The light comes and go, by the time i get to garage, it was gone and there is no way to scan it. Garage suggested that I should change ABS pump. What do you think ?

[@LMAutoRepairs]

@sanmi rufus What do you mean no way to scan it? If the light was on, most likely will be codes logged in the ecu... I am not a fan of changing parts without proper test and diagnose... it can became very expensive, very quickly!

[@sanmirufus7888]

@@LMAutoRepairs The code comes up off and on before I start the car. Whenever I get to the garage it doesn't come up for them to check it. Thank you for the advice, I just have to wait till they can check the code.

[@LMAutoRepairs]

@sanmi rufus If the engine light comes on, most likely has logged a code... the engine light does not need to be on, for the codes to be retrieved from the ecu...

[@pedrolriveranegron5178]

Excellente buddy! Very well explained!!!! greetings from Puerto Rico..

[@LMAutoRepairs]

pedro l rivera negron Thank Pedro, for watching and for your comment!

[@pedrolriveranegron5178]

I'm trying to find you on facebook, so I can upload your videos to my workshop page and Tag you so others can see and know about your work in the field of European cars. It seems to me that you do an excellent job and for many it can be of great help, especially with BMW'S, MERCEDES, JAGUAR, COOPER, PORSCHE as they are the most sold here in Puerto Rico and USA!Here is my facebook link; facebook.com/pedrol.riveranegron

[@LMAutoRepairs]

pedro l rivera negron I really do appreciate... but I do not have Facebook... feel free to share my videos and my channel though...

[@enlightenedshadowhunters]

Would this make the Volvo much harder on diesel on a long drive

[@adrianleeyoughal]

hi i have a volvo v50 1.6 changed the turbo recently and have no power until after 3000rpm changed the soleniod. car is remapped and dpf deleted would you have any idea what it might be ? thanks

[@adrianleeyoughal]

car has had a full service and a new fuel filter aswell

[@LMAutoRepairs]

@@adrianleeyoughal Hi prodiag.boards.net Me or other members will be more than happy to help you! Thank you for watching!

[@ro55reel5]

One of my faults amongst others is 1517 also. Turbo control pressure too high. I have 2a40, 68c7, 68d7, 444d also from the ecm. ABS/BCM 0101, A030, 0108 The anti skid thing is driving me mad, its unsafe losing power and speed going uphill on a motorway and having to restart. Maybe if i address the 1517 fault it will solve it

[@haydnwalker2589]

I have very similar faults did you manage to fix it ?

[@farouk6829]

great video as always maybe the previous garages dont have the right tools and the knowledge to tackle the fault logically

[@LMAutoRepairs]

farouk You might be right... Thank you for watching!

[@adams9122]

Hey can you please help 🤞🏼 I have a Volvo s40 2012. Anti skid service required “ message appears and my car completely cuts out. I close and open the car with my fob 5 times abs I can drive again. I can drive up to 70 miles and it will happen once and then happen again a few more miles, any ideas what this could be please, would appreciate any help LUCY.

[@LMAutoRepairs]

Scan the car and go from there... Most likely will be faults logged that will point you in the right direction... Thank you for watching!

[@adams9122]

@@LMAutoRepairs I have taken it to mechanic, he had it for 4 weeks . I got codes - he found to faulty wires which were repaired but after 70 miles it cut out again ?

[@LMAutoRepairs]

As I said... something else is obviously wrong then... Anything I would suggest, with no information, would be pure guess work... Best way is to scan the car, visual inspect and go from there...

[@adams9122]

@@LMAutoRepairs what if I show you the codes ??

[@LMAutoRepairs]

Post them here... and I can try to make some sense out of them...😊

[@ericosterlund]

Hey Mate, Thanks for the video. I had the same issue as you, so i bought a brand new Pierberg solenoid to replace the old one. I still have the anti-skid service light, and lack of power. Does the anti-skid put the car into limp mode? Any ideas? Thanks :)

[@LMAutoRepairs]

Have you scanned the car prior to replace the solenoid? Thank you for watching!

[@ericinpublico2079]

@@LMAutoRepairs the amount of times that we scanned it is uncountable. So yes, it was scanned. But the only fault we're getting now is an abs communication error. I'm thinking about cleaning all the contacts in the fuse box (located in passenger foot haul)

[@LMAutoRepairs]

Why is a different person responding? 🤔 Anyway... that fault is on the engine module? Can you communicate with the ABS?

[@ericinpublico2079]

@@LMAutoRepairs haha, sorry, I have 2 accounts and I guess this one is the one on my phone. I'll have to get the full code read out to answer you better.

[@LMAutoRepairs]

😊👍

[@mzuvukilemxegwana8004]

That is exactly what is happening to my s40

[@dermotned9697]

I have the exactly the same problem with my 08 volvo s40 1.6 but iv changed the tcv for a new one but I'm still having over boost problems and the anti skid service required and reduced engine performance it's driving me mad at this stage any help would be appreciated

[@dermotned9697]

I'm having the same problem with s40 iv changed the tcv and replaced the turbo to made no difference now I have a p0238 code this f...ING car is driving me mental

[@LMAutoRepairs]

An overboost can be caused by several different things... You need to check vacuum, the solenoid, etc...

[@dermotned9697]

@@LMAutoRepairs where are you based?

[@jasonwade2277]

LM auto repair/ can you show me in a video please, where the thing that you replaced is situated, I have the same problem you have exactly described, my sensor light is up about the anti traction control, and I cannot get full power out of the engine, I would like to buy one second hand and put it in myself is there any way you could just point out where it is just to reassure me

[@LMAutoRepairs]

Is situated at the back of the engine... But remember, you can have the same symptoms, caused by a different problem... It is something similar to this... www.eurocarparts.com/search/424440290?type=shopping&gclid=Cj0KCQjwj7v0BRDOARIsAGh37ioWUoDHFsI54JUqHbxEMV-ZOJchV_72CG0VKLAtBvn1JSNCuFpOBzsaAlt6EALw_wcB Thank you for watching and for your comment!

[@jasonwade2277]

@@LMAutoRepairs/ so is it most likely that the anti traction thing will just call it and attraction, we all know what i am referring to that is triggered by the fuel pressure fuel pump situated at the back of the engine as you said ,that's what causes the anti traction light to come on Does that mean, that when you fix the fuel pressure device the anti traction will rectify itself ,? and would it probably do No Harm to clean the mass air flow also ,would this be a good assumption not necessarily fact, but a good start of assumptions so to speak is that safe to say.??

[@LMAutoRepairs]

@@jasonwade2277 The traction control light will come on every time there is a problem with the engine that will affect accuracy of how system can control the engine torque etc... it will clear once the fault is rectified... There is nothing wrong with the cleaning the maf, providingbyou are using a suitable product... 👍

[@masto7550]

the message ANTI skid service required and after a while the message BRAKE FAILURE STOP SAFELY jumps out. The blinker does not work and the car enters emergency mode. What could it be? the mechanic said it was a computer but another mechanic said he probably did not ... How can I ask for advice? Thank you

[@LMAutoRepairs]

Start by scanning the car... The anti skid can be caused by many things... but the brake failure is more specific... so see which codes you have on which modules, and go from there... Thank you for watching and for your comment!

[@masto7550]

You know someone wise around Gravesend. Thanks

[@LMAutoRepairs]

@@masto7550 No in that area, no... Sorry...

[@Csavarhuzoo]

Is your problem get solved? My s40 does the same, I think it’s a CEM issue, because mine stops this if I gently tap on the module, so contact issue is a possibility. The bigger problem is, I don’t find any electrician/mechanic who accept the job.

[@geoffreyrawlings9736]

Hi another great viddy. would you have been able to track the turbo boost pressure ect on your old ds 708.

[@LMAutoRepairs]

Geoffrey Rawlings Hi Thank you for your comment! I think I would, although the graphical data on the DS708 was not as good as on this scanner, I think would be good enough for something like this...

[@bodgitandleggitgarage]

Nice fix mate

[@LMAutoRepairs]

bodgit and leggit garage Thanks!

[@carpediumace]

Hi is the part called turbo boost pressure solenoid

[@LMAutoRepairs]

Something along those lines... yes. Thank you for watching!

[@eugenereap7366]

Mine I drive 1,2,3 then once I hit 4th the anti skid comes on and it loss acceleration. Any ideal was just in a accident in which my driver side tire recieved minor impact and I just replace wheel bearings

[@LMAutoRepairs]

Hi It might just be a coincidence, or it might be that the abs sensor on that side, has suffered some damage... If you have how, check codes and live data... Thank you for watching!

[@silkSatinBoxers4eva]

Can u actually clear the codes temporarily? I need to pass my MOT and it's ran out and have the same problem

[@LMAutoRepairs]

You can clear them... how quick they will come back, all depends... Thank you for watching!

[@silkSatinBoxers4eva]

Cool thanks 👍

[@silkSatinBoxers4eva]

@@LMAutoRepairs sorry m8, one more question, did clearing the codes take your car out of limp mode?

[@LMAutoRepairs]

Again depends... Certain faults do, until they are triggered again... some others don't...

[@kornelk2007]

What about non turbo cars and skid service required all the time on?

[@LMAutoRepairs]

Scan the car... it will be a different issue... Thank you for watching!

[@silkSatinBoxers4eva]

Anti skid on my C30 in limp mode and says service required .. which pipes do u replace? U haven't really said how u even did it.. please please please tell me how to fix it

[@silkSatinBoxers4eva]

Which valve/s do i need to replace mate ? I have anti skid service required and is same sluggish as u explained mine is a 2008 1.6 petrol SE C30 which valves??

[@LMAutoRepairs]

In this case the turbo vacuum solenoid... but I would advise you to scan the car first... Many other issues can cause the same symptoms... 👍👍👍

[@silkSatinBoxers4eva]

@@LMAutoRepairs ok thanks

[@jerryrivera8317]

nice!well said mate!thanks!

[@LMAutoRepairs]

jerry rivera Thank you for watching!

[@ajiazriaz6356]

My s40 is cuming with a list of faults regards to communication errors it’s sluggish when I drive it, I was wondering if it could be the turbo value?!

[@LMAutoRepairs]

Ajiaz Riaz Have you scanned the car? That would be my first step... Thank you for watching!

[@sadikmamoun2847]

good job and good video as always

[@LMAutoRepairs]

sadik mamoun Thanks!

[@benjaminlevi7792]

So could you make crankshaft and camahaft compare on live data for timing and cvvt valve I want to find a way without Scope to compare crk and cam thanks

[@hz-fv4yf]

Anti skid I had problem .Problem was injector

[@LMAutoRepairs]

☺️ 👍👍👍

[@HS-vw6uz]

So what was the problem???

[@LMAutoRepairs]

Explained on the video... 👍👍👍

[@carscars32]

Good

[@LMAutoRepairs]

CARS CARS Thanks!

[@KeepingItREEL24.7]

What is the actual issue an how do I correct it? Thank you...

[@LMAutoRepairs]

I explained it in the video... at least in my case... Thanks!

[@ДмитрийТукало-л6о]

Здравствуйте у меня вылезло сообщение anti skid service required и ошибка p086d и p086c, когда на панели появляется сообщение anti skid service required автомобиль глохнет, volvo v 50 1,6 D2

[@subtlestevey09]

What’s the name of the valve. You repaired ?

[@RealuisTorres]

Could you please fix my Volvo?

[@jozzerful2]

Are you based in Ireland?

[@LMAutoRepairs]

No...

[@abbybennett3799]

can you fix mine??

[@pauloandrade9650]

Have V50 1.6 d and pushing informações 4 gear 3.500rpm have no Power and anti drift needs revesion and motor performance reduce

[@LMAutoRepairs]

Have you scanned the car? Thank you for watching!

[@MechanicTechnicianRepair]

Amigo tengo. Una. Pregunta. De estado. Eres.

[@LMAutoRepairs]

Mechanic Technician Repair I am originally from Portugal, I am in the UK now for 14 years....

[@drivewasher]

you mean, you drove it like you stole it!

[@LMAutoRepairs]

Steve Ashcroft 🤣 Probably that was what looked like....lol

[@darrenpowell7225]

were your workshop

[@LMAutoRepairs]

Darren Powell I do not have a workshop... I do this as a part time...

[@numingangdembe2604]

LM Auto Repairs would you be able to come in Aldershot area. I am having same problem.

[@peterjoseph2803]

☆☆☆☆☆ my volvo dealer wants 2000€ for anty skid service...but they can't explain what is been replaced or repaired. So I'm not going to hand over 2000€ ???? For what.... i have orderd 4 ABS sensor (volvo dealer 88€ per sensor) internet 49€ per sensor..... i have the 1.6V50 325.000km.

[@LMAutoRepairs]

The anti-skid can be caused by other issues... You should have scanned the car first... Actually, if the anti-skid is coming up, and the ABS is not, most likely has nothing to do with ABS sensors... Always scan and investigate before start to throw parts at it... Good luck...🤞 👍👍👍

[@peterjoseph2803]

THANKS for that....

[@LMAutoRepairs]

@@peterjoseph2803 👍

[@rekamud6635]

@@peterjoseph2803 Hi Peter, can you post results? I for example and my Machanic collaeague who both drive 1,6D from 2006 had the exact same problem. Never fixed it though, but check EGR Turbo DPF Belt Injectors and ABS sensors so we never bothered fixing it. How much did it cost you? Oh besides that, we did that for regular maintenance on 200k

[@peterjoseph2803]

I have haven't repaired the problem. Still to replace the abs sensors..... volvo is @ 330.000 km not will spend 2000€ on the problem. Car Purchase price 5000€ repair cembox 1000€ alternator 300€ spaccer liftkit 1000€ 4x shocks200€ 4 discs+ pads 100€ .2 front calipers 400€ + turbo 200€ + intercooler 100€. 4 wheelberaring 400€. Sway bar upgrade elivate 1500€. Front rear sway link arms 350€. Ecu remap 200€. All tapt out no more money to go toward the 2010.1.6 V50 engine is not 100% still able to get 1000km a week out of it.

[@nik0las1]

1.6 = crap engine!

[@LMAutoRepairs]

There is better engines... and there is worse... Thank you for watching!

[@johnketeni982]

I think you are talking too much, go directly to the issue concerning the video

[@LMAutoRepairs]

I can make it to last 10 seconds... And you would never understand how to got to the issue... I will not change the way I make these video... Thank you for watching and for your comment. 👍👍👍

[@florencemaduveko9564]

Dude you're wasting our time we do not understand whatever you're talking about. Rather show us when you're troubleshooting the problem or show us where to fix not a thousand words.

[@LMAutoRepairs]

It is called learning... this is not a place for "silver bullets "... Have a nice day...

[@carscars32]

good

[@LMAutoRepairs]

العواطف الجميله Thank you for watching!