VOLVO SID803A ECU Synchronization using I/O Terminal and X-Prog M BOX

How to properly synchronize the Volvo SID803A ECU.
To synchronize we need:
- EEPROM from the right CEM processor, in this case it is a Motorola IM84E
- ABS ID number from the ABS pump - to read it we must use the diagnostic interface, e.g. Launch
- EEPROM memory from the SID803A engine controller
We use I/O Terminal and X-Prog M BOX
You can find such a programmer in our stores.
sklep.atomis.co...
atocan.com
premium-tools2...
=============
CONTACT
=============
mails:
[e-mail]
[e-mail]
stores:
sklep.atomis.co...
atocan.com
premium-tools2...
Music:
/ audiolibrary

[@vladalexandrucojoc921]

Thanks a lot for the info. Didn't had any CEM from Volvo. I have the io terminal qnd only vvdi prog. Thanks

[@atocan1594]

We're glad we helped! If you have any other problems, please contact us and we will create a video for you ;)

[@georgeldiaconu3667]

I need to calculate the crc on SID803a you can help? Thank you.

[@atocan1594]

Hello, please send me file on email: [e-mail] ;)

[@georgeldiaconu3667]

Thank you for your help. I tried for 2 days to find it but no way, thanks