Volvo XC70 Key Programming With Autel IM608

2008 Volvo XC70 all keys lost,
Key programming on bench,
CEM eeprom reading.

[@mr.manambit9612]

Thank you sooo much brother for the information on how to add key on volvo XC70.

[@8power0]

GREAT WORK,,, THANKS FOR YOUR TIME!!!!!!!!!!!!!!!!

[@schluesseldienst_muzler_de4067]

Nice work. Good Video

[@erwan7]

Great video. Quick question- can i read immo from cem using only im608 through obd or i need xp400 pro also?

[@adamsny6605]

Good movie, best regards, Adam

[@josuedavidnataren4255]

Can a used key be cleared/renew and program to volvos? Thanks

[@firebirder]

Good video. You noted it takes very long time to find out the data via OBD. (How long is that?) So you took the way by removing CEM and soldering.

[@seanwalsh3364]

did remote work or do you need other tool

[@huyug1]

Yes everything worked the way it supposed to

[@user-cr8ot4iw2k]

Can the CEM module be replaced in similar process with this equipment?

[@aleksandarpopovic7090]

We need you in Ottawa- Canada almost nobody knows how to do it or they charge like 400$ like come on it should not be so expensive. Good job I do have one key and want to program the other one. If i get the one from e bay that has a chip could that key be programmed??? Thanks

[@huyug1]

Thanks a lot! Yes as long as it is a new key you should now have problems.

[@zymon.]

$400 is a pretty good price, imo, especially Canadian $

[@citylockapolytechnikeyllcc7936]

400.00 is too much? How much in the Volvo DIY forum was it ? Geeez..... but you will likely get a price break on doing two at the same time, and most will not touch used parts from Ebay. Your mileage may vary

[@motosystemltd]

Good job, yes this one is easy, but some xc90 after 2005 for add the key by Obd need remove 2 chips from CEM, some types have encrypted bytes and 1 chip from mirror :) I just copied the transponder, for emergency key, If customer willing to pay me more for the job than main dealer ordering the key (about £200) why not. Obviously for AKL no problem.. Please have a look on some xc90 models.... Take care :)

[@rh7163]

This has to be the most ridiculous way to go about programming a key fob but it comes with so many options to really mess things up with a soldering gun........on a system you can guess at by looking at a circuit diagram.

[@SLJB8]

Welcome to locksmithing my dude

[@TimHaunFishing]

Very well done my friend. Where did you end up sourcing the key? Key Innovations doesn't seem to have them.

[@lonetraveler5660]

Great video. I have one key. If I just add a semi key, do I still need soldering? Thank you

[@huyug1]

Yes I believe you still would have to remove and solder

[@Peter-hc4di]

You can add a key thru obd but that Will take forever. Thru obd I do them overnight!

[@huyug1]

@@Peter-hc4di yes I think I mentioned it in the video. Like you said it will take overnight to calculate the eeprom data through obd.

[@Peter-hc4di]

@@huyug1 Yes Huseyin you did! I was only replying to The question above! Thank you for The upload! Best wishes from Sweden!

[@100pyatt]

Does this work on P3 Volvo 2016 ?

[@undo7777]

good job

[@Peter-hw1yx]

how much do you charge?

[@joesmith2436]

Have im508 with xp400pro would it do ignition key switch programming and do I need new keys via obd?

[@joesmith2436]

For the same 2008 xc70

[@matejbruna2663]

You can solve All-Key-Lost on XC70 (2008) with IM508+XP400 Pro via OBD. It works, but you must be patient, it will take about 8 hours. I recommend external power source for battery. After decrypting you are able to learn new keys. I made it yesterday.

[@doron2500]

​@@matejbruna2663 did you left the programer in the car connected to OBD for 8 hours?

[@audriuskimtys7943]

Hi, have you ever tried to extract or decode CEM pin code?? Thanks for video!!

[@huyug1]

Hi, I have never tried it but there maybe be softwares which are able to extract it.

[@user-qg8mm7wj5v]

X100pad3 сделает?

[@Peter-hc4di]

Hi! Do you know If im608 with xp400 pro is able to clone Volvo V60 CEM module R5F64525KPD? It can do all Keys lost for this cem type but not sure how to clone it... Thanks!

[@huyug1]

You would just transfer eeprom and flash file if available