I like your car really much...the revs produce a fantastic symphony of awesomnes!! Keep it up!
@SimplyVolvo4 жыл бұрын
One of my favorite whiteblock builds! Steel rod failure from too much torque / high rpm combo? Looking forward to the new season :)
@vekku804 жыл бұрын
I had ignition problems. I believe that those were the reason. Had couple missfire in 3bar boost.
@szymon62072 жыл бұрын
640hp brokedown is Burned !
@nightnope4 жыл бұрын
saletisti se kylän kovin volvo. nice video again dude!
@szymon62072 жыл бұрын
Have antilag ?
@242bleek4 жыл бұрын
Keep up the good work. Love following this car. Please bring it to the U.S. and eat up some supercars in the standing mile.
@szymon62072 жыл бұрын
Beafore 1005 after 1048 hp !
@palmjc38725 жыл бұрын
Awesome!!
@laddtryck4 жыл бұрын
spinning tires at 170 kmh, my car doesent even spin in first ;(
@geoffholling47734 жыл бұрын
Which ECU are you using, Been looking for a suitable one for a V40 for a while.
@vekku804 жыл бұрын
Finnish made Freedrive ecu with MS3 processor.
@GetBruno4 жыл бұрын
Man! Keep us updated!!!!!! how is your wagon now a days??? Hug from brazil
@vekku804 жыл бұрын
All good here except clutch. Gearbox is down right now and Im chanching different type of pressure plate. Target was to go on 1/4 strip tomorrow but its bad weather here.
@GetBruno4 жыл бұрын
@@vekku80 Wooowww Amazing Man! My daily drive is the s40 t4 150.000 km and still surprising modern cars in any situation, but I didn.t know about its potential :OOO Do you ever heard about Black Diamond clutches? They are very famous in heavely modified volvos in UK and E.U. were are u located?
@vekku804 жыл бұрын
I have heard it but will use sachs 765. Im from finland.
@GetBruno4 жыл бұрын
@@vekku80 Ohhh nice dud. I´m based in Spain right now, so we´re not that far :)) Man...congrats, I´ll suscribe to your channel to see more drags with your bad ass old school wagon xDDDD See u!!
@rosstihh22205 жыл бұрын
CAN'T WAIT!!!
@heimermaal49334 жыл бұрын
What motor are you running? 1.8? 2.0?
@szymon62072 жыл бұрын
2.0l i think !
@noorzaidi2204 жыл бұрын
Why you do complicated thing, if you install S 60 R engine it will touch 383kmph !
@Jasperlaban99 Жыл бұрын
have you noticed the difference between b4194t and b4194t2 and newer oil pumps? is the old style pump any good?
@vekku80 Жыл бұрын
There is differences yes. I dont remember how. But I use D5 oil pump with T5 or T4 spring. D5 pump gears are thicker. It produces over 8bar pressure. Thats why I changed loosen spring from T4 or something like that. Also I have couple shim washers under that. Now the pressure is 5-6bar in max boost and warm oil +9000rpm. T5 pump is thicker than T4 also. But D5 is biggest. T5 I mean 5cyl volvo engine.
@vekku80 Жыл бұрын
T4 and 2.0T ph1 ph2 the springs are different. Also old ones has little different shape inside it. I would say that 2001-> will be best choice.
@mihairepsol Жыл бұрын
U got stand alone i think right?
@Juu5504 жыл бұрын
On se kova,nostan hattua
@burneraccount4755 Жыл бұрын
Do you know why did that rod bend in the first dyno run?
@vekku80 Жыл бұрын
Ignition issues.
@andyfreer76964 жыл бұрын
Hy,I'am running a V40 2.0T 165HP stock and I want to upgrade him so over 250Hp do you know from where can I purchase parts.Thanks
@vekku804 жыл бұрын
Ph2 T4 turbo 14T will go there. But 18T will be better.
@somervillearron4 жыл бұрын
@@vekku80 so my 180hp with a 20t turbo would be overkill? i have not yet fitted it
@vekku804 жыл бұрын
Not overkill for sure. I think I have :)
@sibhyt08 Жыл бұрын
I feel bad for the pistons in the thumbnail
@24vp444 жыл бұрын
Where did you get your cam gears?
@szymon62072 жыл бұрын
8 automatic zf
@Jasperlaban9927 күн бұрын
What headgasket are you running
@vekku8027 күн бұрын
Copper with rings
@Jasperlaban9927 күн бұрын
@@vekku80 fire rings? Or steel cut rings with receiver grooves in the head
@vekku8027 күн бұрын
1mm Fire rings (stainles wire) in head. Cylinder side I have receiver grooves.
@Jasperlaban9927 күн бұрын
@@vekku80 im running the same setup, but need the gasket and to machine the receivers. Is there a possibility to get in contact with you for some info/pics
@vekku8027 күн бұрын
Nothing special about them. You can find a lot of information on the fire ring and receiver groove from google. I do not make gaskets for others.
@fv77654 жыл бұрын
The last two clip 'comment off'?
@szymon62072 жыл бұрын
Enforcer !
@magyaradam70394 жыл бұрын
Hey can u list everything that was done to the engine?
hi what is the engine displacement and what is the crank stroke and rod?
@vekku804 жыл бұрын
1901cc, 90mm stroke, 82mm cylinder, rod 149.5mm (10mm longer than original 139.5)
@sahibindenpolonya16514 жыл бұрын
@@vekku80 which engine's piston and rod?I couldn't find aluminum con rod
@vekku804 жыл бұрын
@@sahibindenpolonya1651 Custom made JE pistons and R&R Rods from USA. You cant find it anywhere.
@sahibindenpolonya16514 жыл бұрын
@@vekku80 I need it where can I get it?
@sahibindenpolonya16514 жыл бұрын
@@vekku80 Is 149.5mm rod custom made?
@strikemi8036 Жыл бұрын
mistä se isäntä sai noi peitelevyt nuihi lamppujen pyyhkimiin
@vekku80 Жыл бұрын
Diy
@Guillermo_XT4 жыл бұрын
How much stable hp can be possible with the T4 without big mods exept turbo & ecu?
@vekku804 жыл бұрын
Stock engine maybe 250hp
@Guillermo_XT4 жыл бұрын
@@vekku80 also any experience with the 2.4D engine? I'm thinking about increasing the power up to more than the cute 131hp in mine ^^
@vekku804 жыл бұрын
Its not a familiar engine to me, sorry.
@Guillermo_XT4 жыл бұрын
Maybe someone you know?
@vekku804 жыл бұрын
Sorry I cant help you.
@dwaynesicheran78494 жыл бұрын
Do you have any social media?
@szymon62072 жыл бұрын
Darwinism
@nissanman740226 күн бұрын
Tuulilasinpyyhkijät varsineen irti ennenkuin lähtee ajamaan lähes 300km/h 😂 Katsoin uudemmista videoista että ne nousevat lasille noissa nopeuksissa itsestään 😂😂
@vekku8026 күн бұрын
Joo nyt ruotsissa olivat pois 😁
@مرادمراد-غ7ر1ه2 жыл бұрын
اريد التواصل
@szymon62072 жыл бұрын
Time to get ready. Have Fun !
@GraditelMacedonia4 жыл бұрын
Steel rods...
@kasiakas1004 жыл бұрын
What plans for oil pump ? And wich one (t4/t6/diesel one) you were using ? what rpm limits to be safe?
@vekku804 жыл бұрын
Now I have D5 pump with T5 spring. D5 spring is too hard, over 9bar pressure with that. I have 9200 soft and 9400 hard limit.
@kasiakas1004 жыл бұрын
@@vekku80 did last engine with 1005hp lasted 2 years, according to video`s timeline ? or it had some braking along the ride ?
@vekku804 жыл бұрын
I build my first darton block 2016. 1005, 1015 and 1048hp from that engine. Went broke summer 2019.