Volvo V50 Airbag Light ON, another CFFF... Fault finding and repair.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This V50 came to me with the airbag light on, and a warning message on the cluster...
After a quick scan, I decided that was probably not worth to record this, as I had already gone through the same fault on a S40...
Video here: • Volvo S40 SRS Airbag e...
But, who knows I might do or say something that will help someone out there, with that in mind, here it is...
The fault in the Airbag module, is the infamous CFFF...
The fix, is here in the video...
Follow me on this video to find out what was the problem and how to resolve it.
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@ralex7213]

Thanks a lot for the video!

[@LMAutoRepairs]

😊 👍👍👍

[@nemanjadzombic6101]

Thank you for another great video!!!

[@LMAutoRepairs]

😊 👍👍👍

[@jackiemay9471]

nice going there Luis

[@LMAutoRepairs]

😊 Thanks... 👍👍👍

[@fuzzs8970]

Maybe try UPA instead of xprog. It's reliable. Thanks for your videos

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@MattyEngland]

Bungie jump to celebrate 100k subscribers? 😂

[@LMAutoRepairs]

🤣 Not sure yet... 😋

[@cardecoder]

Problem with XprogM software when reading 9S12 is with usb drivers of software. On PC where you will install XprogM software you must take care that you do not install any others software what use this type of usb drivers FTDI drivers. If you do that way, you will not have peoblem with reading and verification. I need a lot of time and trying different PC-s to get this conclusion.

[@LMAutoRepairs]

That's why I usually connect it through com port... not usb... but still have the same issue... 👍👍👍

[@craigrice1960]

Half a tank of go go juice ⛽️

[@LMAutoRepairs]

😊

[@anapaulapereira3255]

top

[@LMAutoRepairs]

Thanks! 👍👍👍

[@dtandfam8100]

Where do you get the clean file?

[@LMAutoRepairs]

Mr. Google...😋 👍👍👍

[@Xxxxxxxxxxxxxxxxxxxxxxxxxxxll]

С адреса 8008 и до конца файл должен быть заполнен ff

[@moldovanandrei7008]

​@@Xxxxxxxxxxxxxxxxxxxxxxxxxxxllможно ссылку на рабочую пару?

[@andrewyeo2353]

Great fix. Is there a fuel guage issue to it was reading half a tank 😂

[@LMAutoRepairs]

It is suspicious when they do... lol 👍👍👍

[@Stoney3K]

There's an easy fix for that: * Open fuel fill door (button on the right-hand side) * Remove fuel cap. * Insert fuel nozzle and squeeze until fuel flow cuts out. * Reinstall fuel cap. * Close fuel fill door. * Bill customer for 2 pounds per liter and half an hour of work.

[@LMAutoRepairs]

Love that fix! 😅

[@ibrahimwaheed987]

Nice microscope! Model?

[@LMAutoRepairs]

Nothing special to be honest, but does the job! 👍👍👍

[@vaidasvdv]

will be back in 6 months. with the same problem. buy donor - clone data.

[@timmehlittleloud2251]

I've never had one come back with corrupted data on Volvo or anything else when bad data has been fixed. Once a new battery has been fitted they seem to be ok for me 🤷 Well, except for Fiat but that's hardware fault with the ATIC.

[@LMAutoRepairs]

I was just to say the same... this is not my first rodeo, and this particular issue, once sorted and a good battery is kept, never seen an issue again... 👍👍👍

[@timmehlittleloud2251]

My clone xprog has never been any good with 9S12. Have you tried with the 608? Could even buy a dedicated 9S12 programmer. I'm even toying with the idea of getting a P50 but I don't do that many airbag modules to be fair. It's only approx £500 so it's not out of the way. Anyway, good fix 👍

[@LMAutoRepairs]

I have used the 608 for a few similar jobs, not sure if I have ever used it on a 9s12 though... A dedicated Motorola programmer is definitely the way if you do enough of them... 👍👍👍