Volvo VNL Cab bag Replacement

[@hectornovoa1336]

Thanks so much for the help & the video. Very helpful! God bless and be safe out there.

[@johnfoster6205]

Them birds are extremely loud!🦜🦜😳

[@parrformanceone]

Yes it is, been a great truck thus far.

[@primomorales3937]

Tks man!! Great class, complete info!!

[@parrformanceone]

So glad it was helpful

[@penguinmater1206]

The right way!! Good job, very helpful video

[@parrformanceone]

Awesome! I'm glad we could help! Any suggestions on the video we should do next?

[@davidsilva5175]

Very good video was able to change air bag n shock my self 👍👍

[@stayloaded1959]

Buddy you are happy and chilling . Birds are so nice !!!

[@ulugbekandijoniy]

Great, thanks

[@coreysmith2196]

Them birds said "Fawk your video!!"🤣🤣🤣🤣

[@dennislynton7706]

Nice details, Cotreker here I am due for my rear bags very soon.

[@parrformanceone]

Make sure you start oiling the fasteners now. May make it easier when it is time.

[@dennislynton7706]

@@parrformanceone I will start doing this Saturday, do you have a video on the rear air bags? Found dealer price of $128.00 on-line is less but with shipping it is more.

[@parrformanceone]

@@dennislynton7706 I have not done rear bags as of yet. There are a couple of videos on you tube, looks to be easier than the cab bags to me.

[@TheEndOfABloodline]

Good vid! Damn those birds were noisy! lol!

[@sedrickwells8545]

Thanks but the dam birds

[@chrisdasher7116]

Did I miss part where he used pipe wrench to remove bag?

[@parrformanceone]

Maybe, once you cut away the bag, the pipe wrench can be used to remove the body/bump stops.

[@chrisdasher7116]

@@parrformanceone yes I know I was just joking

[@ericcmotz864]

Question why didn’t you replace both bags at same time? Also wouldn’t it be easier to completely inflate the bags to raise the cab block in the up position then replace the bags? I haven’t done this yet but it looks like you would probably have more room to work.

[@parrformanceone]

I had replaced the other bag several months earlier. It is good to use the bags to lift the cab enough to block and remove the bags, however I had ordered an incorrect bag, and this is where the amount of lift was insufficient. I have since replaced both bags with the correct part number bags. I was also replacing a bad bag each time, so I only had one good bag to inflate. The job is not very difficult, if the bags both still hold air, should be even easier to swap them.

[@ericcmotz864]

@@parrformanceone I was going to replace the airbags cause it seems to me the cab bounces almost as much as the International or could that be cause those little shocks are bad?

[@parrformanceone]

@@ericcmotz864 The bags would only need replacement if they had popped or are severely dry rotted. The shocks would damper the rocking motion significantly. Just as they do on any suspension. Worn out shocks=bouncy ride. A quick fix to help with the motion of the cab would be a set of Donvel valves. They are pricey but will restrict the air flowing freely between the bags. This is most noticeable when you are slow speed backing and the cab rocks side to side. These little valves improve it a lot.

[@thomaswhite3043]

I just replaced my shock absorbers. And I’m bouncing like a mfr. what can it be?

[@msengineeringdavid3148]

Is your truck converted to an rv?

[@otralexvlogs5196]

Notice comfort difference?

[@parrformanceone]

Yes, much better ride. I also added Donvel valves to the bags. The valves reduce tbe side to side rocking motion, especially when maneuvering in a yard. Donvel.com

[@gavikpt1]

How do we buy those valves? I been trying to buy but there’s no option to buy it. Strange lol

[@themaestro7922]

Wait. TWO videos on this channel? TWO?

[@parrformanceone]

My camera man/editor moved away. Maybe someday I’ll do some more, what content would you like?

[@themaestro7922]

@@parrformanceone VNL- and D13-focused stuff seems just right for you! You were one of the few I've ever seen use that Lisle quick-connect disconnection tool. (Assuming it's a Lisle. I guess there are a few other brands or rebrands out there.)

[@parrformanceone]

@@themaestro7922 Yes this are the Lisle 42400 set, great tool to have.👍

[@bartul777]

Im here to see how to take out the top nut from the top airbag thread ?

[@parrformanceone]

I was able to cut the bag and turn the top half of the bag with a pipe wrench to remove it. You will want to spray penetrating oil on the top nut a couple of days in a row ahead of time if possible.

[@parrformanceone]

So glad the video was helpful. I strongly suggest adding the Donvel valves, to control the side to side motion of the cab as well. I have no stake in Donvel, just a customer. www.donvel.com

[@jtmartin8076]

Shut them birds up ! Can't hear you 😂

[@zoranlazarov2370]

More birds talking than him ! 😁

[@parrformanceone]

The lady that fed the birds finally moved away🤓👍🏽

[@nramroop79]

Omg the birds are louder than u .. tell them to stay quiet damm

[@genesis1177]

Gosh dude just please get on with it already. You're dragging this out so slow.