How to program 2013-2015 BMW 328i Smart Key with Autel IM608 FEM/BDC System "Process Explained"

If you are looking to program a 2013-2015 BMW 328i key with the Autel IM608 FEM/BCD system, then this video is for you! In this video, I'll walk you through the entire process of programming a smart key with the Autel IM608 FEM/BCD system.
By the end of this video, you'll know how to program a 2013-2015 BMW 328i smart key with the Autel IM608 FEM/BCD system. So if you're looking to upgrade your car's key, then this is the video for you!
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

[@fadilabban5769]

Hello, I love your videos, I have not done a BMW yet, but programming keys is sometimes stressful.

[@JVFIXLLC]

yea sometimes specially when is all keys lost

[@partoems9376]

depends on the tool employed to do the add key or akl. autohex does it simple with little or no stress. just autohex is very expensive tool but among the best in its class.

[@klanr508]

Saludos amigo si dices que es AKL porque sacaste el password de la llave que ya tenias. no era mas facil agregar otra llave con esa misma que ya tenias sin remover el modulo fem/bdc

[@computerisedcarandtruckdia9489]

Very informative video. Thank you.

[@JVFIXLLC]

thanks for watching

[@alejandromillan4519]

Gracias a tu vídeo pude programar una llave para un 2016 bmw 328i y me paso lo mismo que a ti que después de programar la llave no prendió y me fui a restore eprom data and it works the car starts. Gracias muchas gracias por tu vídeo

[@JVFIXLLC]

gracias por visitar el canal

[@tomking3942]

The guided functions should be used if you never have done these before. The guided function restores coding at the end. A no start condition for just add a key is a major pucker factor. Good video

[@fishonnelson2353]

Great work mi amigo! Muy Bien! Y gracias!

[@JVFIXLLC]

no problem

[@MilianCarrascoserrato]

Otros vídeos remueven el chip. Hay dos maneras de hacer AKL?

[@JVFIXLLC]

si hay 2 maneras la mas segura es remover el chip

[@Best-hz8wt]

Is this procedure the same for akl? I got lost while procedure. Sow could you please text what to do. Like 1 read epprom. 2 modify epprom 3 write epprom back. 4 key learning ( precoding) etc. I lost after that. Thank you for your time!!😊

[@JVFIXLLC]

this process is for all keys lost if you want to add a key u can easily do it by obd2 together with the xp400pro and aki I have never used that one sounds more complicated lol

[@bobhutchins557]

Thanks for a great video (as always)! However, I did get lost several times from the middle of the video to the end. I've never done one of these FEM systems before so it's all new to me. But I really got lost after you wrote the EEPROM, reinstalled the FEM, took the FEM back out, did some more stuff, put the FEM back in, tried to learn the new key, learned it, key didn't start the vehicle, clicked on "Repair" and something got fixed so the key worked after that. I got (and am still) confused from 15:20 to the end. It seems you did several things (or maybe you didn't) that aren't on the video in that 7 minute span. From 15:45 (or so) to 16:15 you mentioned a bunch of things, ending with "you're going to get your original file. You have to disconnect just the power and plug the EEPROM. I already did that and it worked..." Then you had to get the password (would you have needed to get the password anyway, or was it because of the corrupt EEPROM that had to get restored?). Then, well, I was just lost. Not your fault. I just need to learn more.

[@JVFIXLLC]

ye these systems are a bit complicated sometimes I did it like that just in case it ever happens to someone that way you can restore it back in case you messed up. it's possible that it might work on the first try but yea that's how these new systems for bmw are designed.

[@jamescc2010]

@@JVFIXLLC I find BMW and Mercedes to be complicated maybe 5-10 times difficulty level, requering more tool investment and learning curve, on different models than Japanese and USA makes for sure. Just got im508 and BGOX so I have to learn. Did VW add key one time as far as Euro car lol. For sure, pay will be much higher once you are good at.

[@Peter-hw1yx]

So what exactly did the Autel im608 do when you pressed write operation ? Just created another slot to use for standard programming?

[@JVFIXLLC]

yea it was done all automatically just following the steps. is easier when u add a key. when is all keys lost u need to disassemble module

[@arvinmohabir6044]

hey bro, the last part where you had to put the key and leave it and press ignition for 10 secs..... i saw you cut the video at that part.. what did you do to get it to work?? I'm having issues with that last part.. remote functions doesn't work and I've to brace key on coil for it to start

[@mbo7613]

Will this work for a 2015 manufactured in October 2014? Local locksmith is telling be 2015 and up are dealer only?

[@JVFIXLLC]

mmm that's an interesting one. do u have vin# maybe I can look something ip

[@farhanghz]

Hi, I tried to add a key for BMW 316i 2014 FEM via OBD using im608ii. It says the process is not supported. COuld you advise if it can done via obd or not? If so, how can I do it. Thanks

[@rodrigoperez2720]

Muchas gracias por el video. si tienes una llave lo puedes hacer por obd?

[@JVFIXLLC]

si si tiene una llave que Abra es mas facil por obd2

[@CCerwin]

You don’t have to flash the eprom when adding a additional key. Only if you have all keys lost is that correct??

[@JVFIXLLC]

yes you are correct

[@segounlocks5029]

No you have to do what he did. Unless its already been motified prior if so you can add key.

[@ronaldkakande6315]

Good educational video, can Autel im508s do it!?

[@JVFIXLLC]

It should if you have the xp400

[@jonyovanno4145]

What did you modify in the eeprom data???

[@JVFIXLLC]

the scanner did it by itself I think it does something to the flash data not the actual eeprom memory, this process is for all keys lost but if u want to add a key it can be done by obd2

[@PavLockLocksmith]

do you have video with akl?

[@JVFIXLLC]

no i don not, what car are u trying to read?

[@segounlocks5029]

This is the all keys lost process only thing different is you need to get code because if you have no key it can’t read dme code

[@mihaicatalin9701]

Hi. Can it be done without the J box? Thank you

[@JVFIXLLC]

yea u need it

[@segounlocks5029]

@@JVFIXLLCno need jbox just xp400

[@jamescc2010]

Why did you modify data file - so you can add a new key? I missed it - how did you save modified data before writing? I agreed with other I got lost but got some basic ideas. What ODB connection cable/device did you use for direct connection? When did you have to disconnect and connect car battery? Please make some more vides that we can follow easily. Thx

[@JVFIXLLC]

apologize for the confusion i revised the video and i noticed i cut part of the film by error, this process is used on all keys lost situation if you want to add a key there is no need to open the FEM. Let me know if you have a question

[@dashtyATG]

​@@JVFIXLLCI noted coz there was 3 used key on the system.

[@yaboi5686]

Is this process same for mini cooper

[@JVFIXLLC]

mini cooper is more easy. just plug obd2 and good to go

[@yaboi5686]

@@JVFIXLLC hmmm really ? Because the one I did said it couldn’t do it and it was DBC too ?!?

[@yaboi5686]

But it was AKL too

[@CeeeRock1]

Please can I do this with Launch x431 pad 7 with xprog3?

[@JVFIXLLC]

yea I think with xprog3 u van do it.

[@Best-hz8wt]

Place, could you please make one more video for bmw 2016+ . I think a lots of people interested in that.. Thank you.

[@JVFIXLLC]

as soon as I get one I will make a video

[@jordanammanshmesani]

W Best video out there

[@JVFIXLLC]

thanks a lot. and thank you for watching

[@user-Alhassany]

How long did the whole process take and where are you buying these keys from? Thanks

[@JVFIXLLC]

the whole process takes like 20min if all keys lost and about 10min to add a key. the key I bought it on ebay for 20 dollars.

[@user-Alhassany]

@@JVFIXLLC appreciate your kindness

[@Locksmith.71]

@@JVFIXLLC if all keys lost do you read the isn from dme?

[@car-key-programming]

@@johnholding107 yes you do need isn.

[@Nery_000]

@@car-key-programming how to know when ite safe obdm ans when is not ?

[@AriasElectronics]

Good job bro! Thanks

[@JVFIXLLC]

no problem

[@rodrigoperez2720]

great video thank you

[@JVFIXLLC]

thanks for watching.

[@DavidPetrisor]

i am also lost why he read eeprom and then wrote it back it looked like all the bmw ive done so far with the IM608 just read password then add key so not sure why he did that but soon ive be doing one of these and ill find out then

[@JVFIXLLC]

apologize for the confusion i revised the video and i noticed i cut part of the film by error, this process is used on all keys lost situation if you want to add a key there is no need to open the FEM.

[@uKeyMe]

Hey bro I need some help, can I pay u for some info. I’m Stuck on the part of the video that got cut off

[@JVFIXLLC]

sorry about the confusion in the video I had a part on the video that I cut by accident. you can program the fob just using the USB and obd2 port and u will need the xp400 to generate the dealer key on a blank key.

[@mehdibechari9444]

Hello . Do you unplug the battery cars wires? Before you take off immobilizer from the car and after when returning immo box to the car if there is any changes on the firt key or on car systemes or something else

[@JVFIXLLC]

no need to unplug the battery just make sure the switch is off and u can remove the immo box.

[@BureePohanBu]

BMW 316i f30 ,2013 I upgraded the ECU but the programmer replied that the ECU is not supported. Is there any way to fix this? Can you advise me? I use programmer otofix im1.

[@rson7421]

Same situation what did you do? Can you share your experience

[@myvideos853]

Is it support im 508?

[@JVFIXLLC]

if you have the xp400 reader you will be able to do it

[@myvideos853]

Ok thanks

[@elviscarey5270]

excellent video very detail thanks for sharing

[@JVFIXLLC]

thanks for watching

[@vicogaming5357]

So you dont even need to read eeprom on bench anyway to add a key its just needed if they keys are lost . For some reason you backup twice the same file to do the same procedure by obd2.😊

[@JVFIXLLC]

if it is all keys lost you need to read it but if you only add with this tool you can do it by obd2.

[@rajushaikh9045]

I was confused, thank you sir ☺️♥️

[@julezxbandit6734]

well if you had a 608 pro 2 you can read from the obd 2 socket

[@JVFIXLLC]

yes u can

[@monteriano1966]

Hi JVFIX..... I follow your video and everything went fine to the point of rewriting the original file... then adding the original key and the new key... but after that vehicle will not start and g=aive a bunch of codes on fem module,,, I noticed on your video fem module shows 15 codes/// I tried rewriting the original and the backup file.. now I get (Failed to get version information restore EEPROM data and retry)... any idea how can I reprogram the FEM to his original state... appears that my files got corrupted some how, any input is appreciated... Thanks. my vehicle is a 2017 BMW 330e. FEM module is identical.

[@JVFIXLLC]

if u have the valid subscription just go to main menu and hit programming and do a programming on the fem module and it will code it too.

[@doctorhvacr5869]

what if you have no working key every video everyone has a working key we need a video without working key AKL

[@JVFIXLLC]

with this scanner you can do all keys lost, is pretty much the same process. sometimes is difficult but with time you get experience and it becomes easier

[@AlpeshPrajapat1982]

All key lost scenario working video must make

[@JVFIXLLC]

as soon as I get to work on one I'll make a video. this one was kinda of a rush because the customer wanted the car that day.

[@mitchellnundlall3729]

How do you get to read eeprom I tried doesn't read

[@JVFIXLLC]

your clamp might probably not making good contact I had a similar issue too.

[@vahasimon7022]

la pince autel ne fait pas une bonne lecture, pour faire une bonne lecture le mieux est de déssoudé l'eeprom @@JVFIXLLC

[@abderahimrefi]

شرح في المستوى

[@alberts7061]

The clamp that comes with Autel never worked. Don’t blame the device for not reading the eeprom. I used another clamp that I used with carprog or other devices and Autel was able to read the eeprom.

[@JVFIXLLC]

yea I actually resolved that issue with the autel clamp by pulling the pins a bit out of the connector I was also having issues trying to read eeproms too.

[@DFWAuto_Hack]

Im surprised carprog eeprom clamp worked. I am suffereing with autel clamp

[@Divinemindset04]

Uhmm i thought to add key only you just had to clone fast and easy by obd

[@JVFIXLLC]

yea that's another way to do it too.

[@CarCareSpotted]

Can you help how can write in dme

[@JVFIXLLC]

that pocedure is abit more complicated, u wanna install a used ecu or program just keys

[@partoems9376]

Great video. Just that autel procedure is too long.

[@JVFIXLLC]

yea u right I have seen this process go faster with other tools

[@partoems9376]

@@JVFIXLLC this is just add key. AKL will take you hours with autel including soldering and desoldering the eprom.

[@OscarHernandez-rj1dl]

Why do all these videos don't explain why they're taking it off or what they're doing to put it back on

[@JVFIXLLC]

if you have any questions or got confused with some thing let me know i could help you.

[@KingsKaswaya-gf1ks]

Like

[@ucsparts]

Your video is very confusing, didn’t explain/ show properly.

[@JVFIXLLC]

sorry about that 😞