Vortex Form, Tesla Function

Just a demonstration how you can achieve tesla function with vortex form.
MOSFET used: FDL100N50F
Primary: 26 x 24 AWG silver plated enamel coated copper wire.
Secondary: 28 AWG x 16" on a 2" OD PVC tube.
Top-load: 8 ring 9 cut-out POE Vortex coil 36 strands of 22 AWG in series.
14-30 watt power consumption in video @ approx 50 Volts.

[@SteveLane]

Very nice coils! It's impressive how well you've managed to wind those.

[@BinjKomisar11]

Thank you Steve Lane . They were time consuming but they look pretty cool in the end.... Still trying to come up with new and innovative ways of driving them... Its an experimental exploration of sorts one might say :) Peace.

[@kjellare]

I bet the coil where "fun" to Wind 😄

[@SteveLane]

Binj Komisar Manually winding coils certainly is time consuming, somewhat theraputic though and doing so opens new levels of appreciation for such devices, Although nothing beats setting one up on the lathe, with autofeed and just sit back and watch the turns count up on the counter, variable speed would be nice as then I wouldn't have to stop to change gear...

[@BinjKomisar11]

Steve Lane Yes, when winding solenoid coils, the lathe is therapeutic... These vortex coils are a little bit more involved though, so would the apparatus (if one existsed) for winding them.. Thank you for appreciating them. Peace. :)

[@consciousenergies]

Nice little demonstration, look forward to more :)

[@BinjKomisar11]

You got it homee.

[@consciousenergies]

Got your package today, it shocked me when I touched it, always a good sign :)

[@BinjKomisar11]

Awesome. And yes, definitely a good sign!

[@tiberiustefan6065]

@@BinjKomisar11 Hello How can I contact you? Can you give me a whatsapp or an email? Thx

[@RenaldoJNR]

Walk in the room phone starts charging

[@longhorndb]

GREAT proof of concept!

[@sideamihaicristian6202]

Loving it. Blessings.

[@burgesshoustoniii2770]

That's super awesome dude.

[@BinjKomisar11]

Thanks Burgess. :)

[@BinjKomisar11]

A very special thanks to Daniel & Erica Nunez, Randy Powell, and of course Marko Rodin. Without them I highly doubt I would been able to make these coils and do this demonstration.

[@1StopEnergies]

Binj Komisar Thank you for your support and contribution to this work! Awesome job! :)

[@BinjKomisar11]

***** Thank you!! :) Seeing your work is what initiated my leap onto this alternative energy path.. So thank you!! I love all of this stuff!

[@perkristensen3854]

Binj Komisar Great !

[@Anon-wo2xg]

I've been following those coils for a while and I'm not really sure they work. When I posted some questions about the coils in Nunezes forum: If they work in a vaccum or when encased in sheets of metal, if the lumen output of the leds is the same with and without the coil. I got no answers and later the forum got deleted. I've asked some ppl that do debunkings to check the coils but so far nobody has even attempted to build and test those coils for real. I'd like to see you use something with limited capacity like a capacitor and then use the leds once without the coil and once with the coil and measure the lumen. The capacitor will ensure that there is always the same capacity. Put the coil suspended in the air inside a case of sheet metal. The sheet metal is there so that radiowaves etc. wont interfere with the test. Make sure to wire everything: the amp, the coil and the leds to the capacitor. Then measure lumen and time. If the coil really works the leds should have the same lumen output and they should run longer on the capacitors energy than without the coil. This test is the proof that the coil works. Without this test the coil is interesting but still snakeoil to me.

[@ilondboi]

Thank you guys! Looks good.

[@TeslaExplorer]

very cool, you know the flow :D :D

[@brochiggins]

Try using 7 bifilar coils oriented and based on the chakra system polarity configuration. Merkaba science. Maybe even coil the bifilar's in a cone-cone, cone-pyramid, or pyramid-pyramid configuration either point-point base-base, or both. (it probably needs to be both to get the proper polarity flow) If you use cone and pyramid bifilars as the 6 chakras other than the heart position. For the heart position utilize a Large bifilar with + and - load leads emanating from the center of the heart. Root heart and crown oriented with vortices going vertical and the rest horizontal tying the third eye coil - spleen coil, throat - solar plexes, and Root to crown. 3 circuits, ground, atmosphere and the 3rd is the load (heart) area. Combining Tesla's radiant energy atmosphere circuit with human energy design. The heart axis may be inverted 45%. And base the whole system on Vortex math and Beta frequency, specifically 30 hz. Just an Idea.

[@dignoragonzalez9652]

Awesome!!

[@BinjKomisar11]

Thanks Dignora!

[@TheSalto66]

With Vortex coil it is possible store EM energy? I mean continuous exchange of E field in B field, where B is out of phase 90 °, like in LC resonant circuit. Store energy for long time inside the vortex. Not radiation of EM outside the coil. If the answer is yes, it can be used like atom model.

[@CraigDAmico]

Very Cool

[@projectmagnet]

Does that energy transmit all through your body too? Have you measured it with an EMI meter to see if it interferes with other electrical devices like your computer or router?

[@psychoo16psycho51]

That's awesome 👍

[@BinjKomisar11]

Thanks PSYCH0016 PSYCHO I appreciate it. Merry Christmas! :)

[@psychoo16psycho51]

Binj Komisar : Merry Christmas and a Happy New year 👍

[@menghsiulee2222]

is it possible to add a battery or charger into the middle? or make a generator?

[@robertmckinley4825]

This may be okay for powering electric lights but will it run electric motors ? I need something that will power my electric well pump motor, also my electric furnace and refrigerator ?

[@rangiroa100]

There was an engineer paper that showed that the Rodin coil can give you free energy. Is it true ?

[@naokikashima9349]

Dang that's cool and that spiral coil is a work of art. So is this a demonstration of scaller waves? Tesla used these waves in his famous tower to transmit power wirelessly. If only that tower wasn't destroyed what a different world it would be today... O' well... time to mend the world. Thanx for sharing!

[@BinjKomisar11]

Thank you! I wish I was the designer of the winding process but credit for that goes to Erica and *****... I do not think this is a demonstration of scallar waves spoken of by Tesla.. I think you need an impulse driven driven HV DC with quenching to achieve scallar waves (at least that is my understanding to date)... We shall keep on keepin on! Peace :)

[@Altimit1417]

Naoki Kashima not scalar. I believe that scalar is pulsed HV DC at around 50-60hz. From my understanding. Also interestingly around 60hz is the resonance frequency of a human heart. Well the frequency which causes a human heart to fail at an alarming high rate. You can compare the number of deaths by people putting their finger in the power socket of a 110v/60hz with 220v/50hz. Anyways, that is from my very limited understanding. Transmitting power wireless is possible but the efficiency is not very high. less than 10%. I can't pull the number from the top of my head. If we can have limitless electricity wireless power that could be a part of our daily life. edit: MIT has gotten 50% efficiency, www.ted.com/talks/eric_giler_demos_wireless_electricity?language=en

[@BinjKomisar11]

Altimit1417 OK, when you think about scalar (or longitudinal) waves frequency does not matter... You need to visualize it like this... If you had a 20 foot long piece of rebar (iron reinforcement bar for concrete) and you hit it with a hammer in the middle the rebar would bend and wave back and fourth, these are regular or transverse waves... The energy rings down over time much like in an oscillating circuit... If you were to take that same piece of rebar and hit it with the same hammer but hit it on the end, the energy is transferred across the rebar instantly with no apparent vibrations... It is more of a direct instantaneous impulse.. That is my understanding anyways.

[@caileanparis9998]

Binj Komisar yup It’s a longitudinal wave, like sound...

[@ickorling7328]

Its not a scalar wave being deminstrated here. Binj was close, stating it must be powered by a distruptive discharge generated via quenched spark gap. This would be called Impulse DC, or transient current at resonance, which occurs at a y frequency; though the frequency chosen should be the resonate frequency of your circuit's capacitance when using vortex coils when powered by DC oscillations. Vortex coils change resonate frequency with the attached capacitance. When powered by AC oscilations, a high frequency is advantagous, though low resonant voltage DC has the advantage over HV AC. Finally, the scalar 'wave' is not a wave at all. Scalar fields has magnatude, but not direction or speed like transverse or longitudinal. An example of a scalar field is aptnospheric pressure at some fixed altitude-- its The same wherever in space you are at; and to translate this to electricity, the transmission occurs when the magnetic field and electric field are in laminar flow (parallel to each other). Normal transverse light wave componet feilds are in perpendicular flow (intersecting eachother at 90°). Hence the scalar 'wave' travels near instantly at any distance (if not actually instantly by entanglement).

[@TheHomeloanking]

Awesome vid!! Can you tell us what brand and voltage the lights and the name of those coils? Great work

[@mykelmzaiogthoth9265]

Where did you find silver plated copper wire?

[@filigenzilab9613]

I hear that Rodin coils can be used for communication purposes. Is this true?

[@FabioMarcosBr]

What proves that this energy that is dissipated is not a danger to human health? If I do a similar experiment in my house will it be safe? Where can I find an explanation for this? Thank's!

[@anthonybarrett7456]

brilliant

[@BinjKomisar11]

Thanks.

[@rocioguevaraobando9075]

Gracias. Thanks. Merci. 😊🙏💚

[@celestialruby888]

I want to get the poe vortex coil for my spooky2 Rife generator. Where did you pick up the coil or did you make it yourself ?

[@BinjKomisar11]

I made the one in this video myself. BUT if you are serious about buying a POE Vortex coil then you should head over the the Nunez's (the creators of the POE-V coil) internet store at 1stopenergies.com They likely have what you are looking for. Peace

[@satriorudi3742]

How much distance wireless lamp ?

[@yoseflopez5141]

What's powering the frequency generator? I'm trying to find methods were the power source itself is getting energy through natural means. The closest I've found was a man that used an antenna to somehow convert energy from the atmosphere.

[@prevadeloach7337]

But how do you create zero point energy

[@MongrelShark]

Wait. You have the secondary wired to the primary? Thats not really a secondary in that case. Primary and secondary are transformer terms. When the coils are only coupled magnetically. Could you do a simple drawing? I'm having trouble understanding what you did there... Nice effect though.

[@BinjKomisar11]

Yeah, the bottom of the secondary (the tube) is loosely connected to the primaries ground (the gold coloured spiral vortex coil), I think that is why it functions even though it is off to the side of the primary. None the less, it is acting like a transformer. A tesla coil is a transformer is it not? Tomorrow i'll draw up a nice schematic by hand, take a picture and post it on G+. Probably tomorrow evening so, I'm guessing, tomorrow night for you. But yeah, thanks for watching and I'm glad you liked the effect. Peace out my friend.

[@MongrelShark]

More like a flyback inductor I think. Still cool though. Good efficiency too.

[@BinjKomisar11]

Mongrel Shark A fly-back inductor is a transformer.

[@MongrelShark]

A transformer is an electrical device that transfers energy between two or more circuits through electromagnetic induction. en.wikipedia.org/wiki/Electromagnetic_induction If coils are physically wired into the same circuit, and not linked solely by electromagnetic forces they are simply inductors.

[@BinjKomisar11]

Often transformers are loosely coupled sometimes its on the transformer core sometimes at the ground of the primary. Its not always black and white. Also if your system/circuit "transforms" 50 volts into over 2000,i t is a transformer regardless of the wiring because of what it is doing. The system was not smoothing out the 50 volts I was pumping into it, it was transforming it. It really is a matter of perspective. (The slayer exciter circuit is a transformer, but the primary and secondary are loosely coupled through the resistor and the transistor. In most solid state systems there is some coupling other than the main electromagnetic induction.)

[@globaleternity]

Where did you get your silver plated enamel coated copper wire? Is it the same thing as the artist 24 awg silver plated enamel coated copper wire or did you get a silver plated "magnetic" copper wire. Just wondering if there is a difference cause I couldn't find any of that wire besides the artist version. THanks in advance.

[@BinjKomisar11]

Ascending Humans. I bought it off etsy, and it is the artists stuff... I thought the coating on it could maybe have worked, but I hate to admit the enamel coating does not work well an insulation, at best it just looks cool.

[@globaleternity]

Ya it does look really cool, thanks for your quick feedback bro

[@JoyboyEats]

Cool, where is the energy coming from?

[@BinjKomisar11]

Hello Normeni. It comes from the grid. I believe mainly from Pickering Nuclear Power station.

[@user-bt4dd8ju4c]

Try to put bottle of mercury near the lamp. Will be surprise

[@danzeda7184]

You can do that with any coil you just made a slayer exciter

[@ickorling7328]

Tesla used a magnetically distruptive spark gap to generate his pulsed DC; I assure you, it is different from MOSFET switching output signal. Your osciliscope wouldnt even pick it up because the nanometer pulse width should be in the realm of nano seconds-- unless you have some fast photovoltaic dectector or something attached.

[@strangescience3414]

What does the magnetically disruptive part do🤔also what are the specifics so I get it the same. Maybe i can look for a patent. I tried forcing 2 magnets together and sparked between those didn't notice anything different so far but I was using high voltage or maybe I didn't configure the same. Hmmm...interested about this.

[@strangescience3414]

Is magnetically disruptive the same as magnetically quenched? I'll check it out. Thanks for helpful constructive comments.

[@ickorling7328]

@@strangescience3414 yep!

[@ickorling7328]

@@strangescience3414 think of magnetic fields like wind against a flame. Fire is just plasma, but idk if it responds the same way to strong magnetic fields. Im sure the magnetic aspect must be as strong as the electeic componet. Also, I think saying "magnetically disruptive" was wrong; say rather, "distruptive electric discharge that is magnetically quenched!"

[@johnsilver2039]

Do you know how to make a chi generator like the types Karl Welz makes if you ever seen one. Like the Ju100 models. Maybe a cheaper version but one that functions. Or maybe you know of a page on the net somewhere showing how to make one whether in a video or written format. Maybe you could make a video yourself if you know how to do this.

[@BinjKomisar11]

Hello Mr Silver.... No I cannot honestly say that I do know how to make a Chi generator. I have no clue how something like Welzs apparatus functions. I'm not saying it doesn't work, all I'm saying is it seems a little bit out in left field and I have no clue how it would work... If you could find a schematic somewhere on the internet of what is inside one of his "chi"generators I could tell you what it is and what I truly think about it.

[@johnsilver2039]

Ok. Thanks I will see If can find a schematic.

[@johnsilver2039]

well you could go into google images and type in schematic to make chi generator and up comes up a bunch of diagrams mostly to make radionics boxes and some images of chi generators. I can see some of the devices have a generator inside which is called a moebius coil. See if you can figure anything out from this if you can huh huh. This seems a little bit confusing to me cause I am not a pro electrician.

[@johnsilver2039]

Heres a link to a radionics device. www.google.com/imgres?imgurl=http%3A%2F%2Fwww.xtrememind.com%2Furadcexternallarge.jpg&imgrefurl=http%3A%2F%2Fwww.xtrememind.com%2Fsitemap.htm&docid=bYW6HRClB4PBvM&tbnid=s1yMiY9EVV7kzM%3A&vet=10ahUKEwiz6oXZnbnVAhWE7YMKHfe4A2kQMwgnKAAwAA..i&w=640&h=480&bih=601&biw=1282&q=schematic%20to%20make%20chi%20generator&ved=0ahUKEwiz6oXZnbnVAhWE7YMKHfe4A2kQMwgnKAAwAA&iact=mrc&uact=8

[@BinjKomisar11]

I'm an electronics engineering technologist.... My gut is telling me it is complete non-sense. I was hoping that you would get a link because I really didn't want to spend/waste time looking up the details (

[@hrcnlz]

Please could you upload the schematic?

[@rustyhelms5232]

hrcnlz

[@Mauijan011478]

hi, can you tell me what POE stands for?

[@BinjKomisar11]

Hello. Thanks for the question :) The inventors of this particular winding process (Daniel & Erica Nunez) were under the impression that the POE Coil produced more energy out than in, hence they named it the Peace On Earth Vortex Coil... Having said all that the jury is still out on whether or not there is a true energy gain, there are some very interesting properties about these coils. ***** has been off the radar for a while and all attempts I have made to contact him have failed... Myself and a few others are taking is upon themselves to carry on learning about various vortex coils and their properties. Anyways, thanks again for the question. Peace.

[@Mauijan011478]

Binj Komisar thank you very much for the thorough explanation!! do you a good source to get some more knowledge about it?

[@BinjKomisar11]

Jan Savay-Guerraz No problem, its really just going to be a long term (possibly life-time) study piece. As my knowledge of energy and electronics grow, so will my ability to run high quality experiments. Thank you for your interest. Peace and all the best :)

[@indigodragon7129]

Try a solid state electrolyte solid state graphite power cell bank with a organic carbon power cell bank to power your coils. 😊

[@BinjKomisar11]

That would be neat. Down the road, the caron based supercap will be back on the todo list for sure. Thanks for the comment.

[@indigodragon7129]

Organic carbon power cells do not release all their charge like super caps do. Pow! 😉

[@BinjKomisar11]

Hmm. Sounds cool.

[@indigodragon7129]

If you set it all up correctly you would have a light source that would operate off earths resonance field. If done correctly one could keep battery banks all charged up in rotation all off earths resonance field. Tesla technology mon. This would be way better then solar maybe? 😕😉

[@BinjKomisar11]

That would be cool if it was pulled off.

[@jacksonchristian3247]

U r genius how the heck did u do that

[@BinjKomisar11]

No. I'm just a guy that is into learning about electronics and physics. Its basically a modified form of a Tesla coil.

[@jacksonchristian3247]

Binj Komisar buddy if these coil can spin tire without a wire If so then please make that kind of video where tire spins without anything wired That would be so cool

[@BinjKomisar11]

Yes that would be cool. If I ever do something like that I will be sure to post. Thanks for the food for thought.

[@DesertWolfSurvival]

Turn the frequency up!!! Like 799 hz. Lol make it fly

[@strangescience3414]

On which coil?

[@GOLEG11]

COmmon Man! no one in the science comunity will ever use SAE units aka (emperial/standard)

[@Xzxzkanal]

Where do you have your frequency generator from?

[@BinjKomisar11]

I bought it off e-bay. $80 US + $20 shipping.

[@Xzxzkanal]

Binj Komisar which company makes them?

[@BinjKomisar11]

Quantum The brand of mine is Lab-Volt. Its the Lab-Volt type 1247-00 Digital Multimeter/AF generator. The limitations are that it only goes to 200kHz. I have purchased and used a no name 0-10Mhz frequency generator/ frequency counter. It has many more functions (including adjustable duty cycle). The only problem is the voltage is not strong enough to trigger the gate directly (a pre-amp IC chip is required). Anyways, I hope this information was helpful. Peace.

[@Xzxzkanal]

Binj Komisar can i connect a dc power supply to that or does it only give ac?

[@ickorling7328]

@@BinjKomisar11 I want to share with you my planned set up to replace a wave form generator-- a quad copter flight controller with an integrated ESC (electronic speed contol) which is capable of outputting anywhere from 5A to 50A with a digitally switched signal that can update 32,000 times a second if disconnected from the gyro and set to a fixed internal loop. It outputs single, dual, or triphased AC with considerable Wattage. It will need custom code for Betaflight to run, but in the long run will be much cheaper, smaller, stronger, and have detailed customized signals. Go quad-copter community! :D

[@Mbruno916]

@4:01 thats battery powered bulb lol had me goin for 4 minutes

[@perkristensen3854]

Resonance.is

[@BinjKomisar11]

Subbed to their newsletter. ;)

[@shanemike3070]

your useing 14-30 watts, thats alot of power so of cource you can light a 7 watt bulb, no over unity or free energy. Try 14 watts in and try 20 watt bulb and see what happens, NOTHING.

[@BinjKomisar11]

I never claimed any over unity.

[@bigpennington1]

This is exactly how the Egyptians created the light bulb.... its not modern tech. Pyramid energy is the same.

[@Agui007]

How embarrassing and infuriating we are that close to have abundant free energy....no thanks to the powers that be!

[@ickorling7328]

You have no idea how close

[@funnynewsboy]

Why don’t you just plug your lightbulb into the fucking socket like everybody else?

[@kingsegdoh8799]

Uuh yeah. Uh yeah.ok

[@Jessica-ym8gk]

So for a chick trying to understand this.... if someone for example bought a rodin coil and whatever else is needed to im assuming run a frequency through it to gice off energy inna way yo power other things. I imagine the key is finding a way to get that power either or running in some form of a loop to create free and clean energy and possibly store it... also there is some way for us to set it up in order to produce more energy than originally used ... am i understanding all this correctly. I just randomly came upon all of this and km becoming supper interested in how it all works

[@danbantony9095]

Thos invencion Is whitout utility because the coil Need Electric energy for to run...tesla Whit her tower taked the electricity from atmosphere because the earth Is a big magnet