JOYOR S10 Z Electric Scooter Review

[@VRMinde]

Buy it here: affiliate.geekbuying.com/gkbaffiliate.php?id=3008&url=1600262 Use one of the discount codes for the fixed 729EUR price on checkout: NNNFRJSS NNNFRS10Z

[@stevekight4507]

you can change the bushings in the suspension to softer ones if you want a softer rear end...

[@crisphol33]

I have all types of scooter from 4000 dollar I honestly love the joyor S10 alot from driving many other more high end scooter, fact why I love it... it's goes 44 true MPH It weighs 62 lbs only It has great true range, not exaggerated It handles like a dream, no wobble. This is one of the best budget scootersIMO (Mid 600 dollar range) and I have alot of top end scooters, this scooter is my favorite all around scooter

[@VRMinde]

I was surprised by it big time, to be honest. I love going on trails sometimes where g2 master is more comfy to ride, but for road riding it is much more wobbly than Joyor.

[@Schmidteren]

doesn't sound like when I go on my S10? It is much more noisy with motors and goes much faster. I have the older version. Also I'm only 65kg. Max speed I've been at was 77kmh, and I let go of throttle because I got scared.

[@VRMinde]

Speed depends a lot on the weight, that is for sure. I also use GPS to measure it, because dashboards always show more than gps. I also make sure to try it on the same road both ways - if there is wind or incline/decline I want to take that out of comparison.

[@Kaabo_Mantis_K_GT]

My experience with the Joyor S10S has been extremely disappointing. The fender fell off after just a few kilometers, with the thread completely damaged. The suspension collapsed despite being rated for 150 kg, and the battery charges inconsistently - sometimes it takes days. The front wheel makes a very loud noise when activated, likely due to the built-in gearbox, which is extremely annoying. To make things worse, the horn goes off randomly while riding. Even after multiple repair attempts, the issues persist. Definitely not recommended!

[@VRMinde]

😳 that sounds horrible!

[@Kaabo_Mantis_K_GT]

@@VRMinde Unfortunately, yes. It was probably a 'Monday production.' The scooter itself has a good foundation with a great price-performance ratio. If the fender were secured on both sides and it was possible to adjust the rubber-mounted suspension, the scooter wouldn't be bad.

[@VRMinde]

@Kaabo_Mantis_K_GT I do not like these suspensions at all.. that was the key disappointment for me. As otherwise it looks like a very high quality scoot

[@FEEDVlogs]

bro , this scooter is brutal, i fall on 2nd November 24 and she still the same and for me its the best, the best thing i bought in 2024

[@VRMinde]

I think it is a bit underrated by many people ;)

[@Schmidteren]

I saw someone if you ride slowly and probably not in the winter, he got I think 74 or 79km of range, but with only speed of 30kmh or lower. xD It has a lot of WH because it is 60V. So much beefier WH compared to most 48V ones, so longer range IF you drive slowly and not aggresively. xD But yes, I alos doesn't get much range because I also like to pretty fast. :D Also weight removes a lot of range and speed. My friend who is 50kg, his much slower 1 engine scooter, he is faster accelerating on his than I am on mine because of 15kg. BUT when he goes on mine, he is much much faster accelerating than me. So it's not the scooter, it's that weight. :D

[@VRMinde]

That is for sure mate. There is no magic - if you want to ride very fast and aggressively you will need a lot of energy for it :) If you slow down or take a lighter rider scooter changes completely. If you have 18.5 ah battery and use 1Amp when you ride - you can go for 18.5 hours. But if you use 37amps, only 30mins... So I am not surprised :) I just assume - if I am buying a fast scooter, I want to push it! Therefore, I do tests at almost max scooters capability. Then you all know it is basically the worst case scenario and you can always save battery up and ride longer :)

[@marvinge2220]

Wie aktiviere ich den tempomat ?

[@VRMinde]

Hold + and - buttons at the same time, it will get you to the parameter menu. Then go to p16 and change the value from 0 to 1