Just got this setup before watching this vid. But small tip for the clamp on the Bov, use a rubber mallet and a driver. Litely tap the outsides of the clamp even if you believe it is in. Had my Bov launch off after hitting 11lbs boost and ended up replacing the o ring. Since I tapped it in the rest of the way it's been hitting the boost just right.
@MattYap5 жыл бұрын
Might have to do a similar set up after seeing this! I’d throw down for one of those tees, they look sick👍🏻
@groovynando55185 жыл бұрын
😂aye y’all keep the videos coming y’all got quality
@brokefamtv84925 жыл бұрын
Thanks for the support bro!🔥
@arnoldrochel49172 жыл бұрын
You think that will make the sound if you modded that on a air intake 5.7 hemi
@dodgecity60833 жыл бұрын
That's the exact sound I'm trying to achieve. I have the same car
@brokefamtv84923 жыл бұрын
I like the HKS way better than the Tial tbh. Specifically when you're doing pulls
@h3ad_tr9p4 жыл бұрын
I want one of those t shirts!!!
@brokefamtv84923 жыл бұрын
Follow us on Instagram and ill sell some once I have enough people who want to purchase them
@luke40105 жыл бұрын
Omfg that sounds so good
@joaoeusebio1244 жыл бұрын
Thanks for the video, found it useful to do the same on my e92 N55! What tool did you use to tighten the t-clamps?
@dogbonetc76235 жыл бұрын
Just in time just got mine too just waiting on my hks
@brokefamtv84925 жыл бұрын
I got it from the vrsf website. They offer hks and tile bov but I like the sound of the hks better
@MrJojosanchez575 жыл бұрын
Quality of the videos are awesome bois!
@brokefamtv84925 жыл бұрын
Thanks bro!!!
@fiestahimself91354 жыл бұрын
I know u just started ytb but how the f do u have only 480 followers? Man u got quality here u deserve much more And btw do i need to tune the car bc of the bov??
@brokefamtv84923 жыл бұрын
We appreciate it a lot! We haven't uploaded in a while but an update video is coming soon! And no you don't have to tune it for the BOV. It will definitely sound better though haha
@ImWhale4 жыл бұрын
First mod after I sell my 328i and get a 335i >:)
@JuanGarcia-vp5tm4 жыл бұрын
Im from harrisonburg Virginia
@JuanGarcia-vp5tm4 жыл бұрын
You guys are from Washington? The roud look like when go to dules airport
@brokefamtv84923 жыл бұрын
Nah bro, we're from North Carolina
@CervantesGarage5 жыл бұрын
Sounds good bro!
@brokefamtv84925 жыл бұрын
Thanks bro 🔥
@connormay90535 жыл бұрын
That's not your maf. That ports for your MAP sensor. Essentially it's a boost sensor measured in bar units and converted to psi
@BxMBAY6 ай бұрын
Which size do I Need for the short vacuum?
@obiedah9084 жыл бұрын
This the n55?
@seldinkorkutovic64814 жыл бұрын
Did you guys have any problems with the turbo or anything after the install?
@brokefamtv84923 жыл бұрын
None at all, the car is still running great🙌
@mael002213 жыл бұрын
I need that 🔥🔥🔥🔥🔥🔥ASAP
@brokefamtv84923 жыл бұрын
Facts! You're gonna definitely like it
@Swc995 жыл бұрын
I got a 135i and I’m trying to see if it will work I’m still new at all this car stuff
@brokefamtv84925 жыл бұрын
Yes it will work as long as it has a n54
@jonathanwoodwad84672 жыл бұрын
Did it cause check engine light to come on?
@Snowshooterjj4 жыл бұрын
Where you guys gone? Can you do pod intakes and maybe exhaust comparison?
@jasmee93calzada805 жыл бұрын
Sounds sick, you need duo cone intake. The sound will be hella loud.
@brokefamtv84925 жыл бұрын
Thanks bro! I just installed them a few days ago and it sounds wayy better.
@dogbonetc76235 жыл бұрын
Post a video brov
@alexanderl74915 жыл бұрын
@@brokefamtv8492 Wheres that vid tho!
@nikhilsoni17734 жыл бұрын
Which aftermarket low beam bulbs are you guys using?
@masonarnicar75403 жыл бұрын
Will it fit my 328xi 2007. Ur air filter box is different from mine. I have the og on it but my performance part even looks different. I don’t wanna install the ads air intake till I get the blow off. Help please?
@dragonianknight88724 жыл бұрын
Y’all ever get an exhaust for the Beamer? I got a 428i, just straight piped it the other day and it sound way better now. Just got my blow off valve and waiting on my intake and tuner
@cris-df3xz3 жыл бұрын
This could fit on a 535i 2009 right
@brokefamtv84923 жыл бұрын
Yes as long as you have an n54 in it.
@lifeclips33293 жыл бұрын
Hey if I’m stock can I do this? Any speed reduced?
@brent47704 жыл бұрын
I put on a bov and every morning I get a check engine light or service engine soon. If I turn it off and restart it goes away. Any idea how to fix it?
@brokefamtv84923 жыл бұрын
Check to see if you have a leak somewhere, maybe the clamp isn't tight
@sheluvspurppo3 жыл бұрын
Nice video! Will this fit on the 2011 e90 n55?
@brokefamtv84923 жыл бұрын
I doubt it would, I'd just go to vrsf and and get the one for the n55 and install should be similar to n54
@rustymilk59495 жыл бұрын
Do i get the oem twin dv charge pipe i see theirs options, i have a 2010 335i xdrive sedan n54 twin turbo. Or is it the other i choose?
@brokefamtv84925 жыл бұрын
If you want to use the original diverter valves then yes get the twin DVD charge pipe but if you want to get the hks charge pipe then it should give you an option to choose that and then you pick the hks bov same thing if you get the tial bov
@fatalproblems5985 жыл бұрын
will this go on my bmw 535i? pretty dure all bmws are like legos and parts can be put on them back and forth
@brokefamtv84925 жыл бұрын
Yeah it's the same for 535's since they both have the n54 engine
@mikejay48184 жыл бұрын
What state are you guys from
@brokefamtv84923 жыл бұрын
We're from Raleigh NC bro
@osamadavid97273 жыл бұрын
What size hose is that I have the same problem and my check engine light came on
@f80brisso3 жыл бұрын
Did u put a N54 charge in a N55? On VRSF the N55 pipe doesnt come with the BOV flange
@brokefamtv84923 жыл бұрын
It's a n54 charge pipe on a n54 motor..
@DJMOTION4252 жыл бұрын
Where can I get a BMW Society T-Shirt?
@DikeLover3 жыл бұрын
Does this require tune ?
@dogbonetc76235 жыл бұрын
What size hose did you get
@faithfulpvps3264 жыл бұрын
Is this car stock like no exhaust or down pipes or anything? I just installed mine I have stock everything other then intakes my exhaust has a little bit of modified but I don’t hear the bov when I rev , is it supposed to do it when I’m driving
@brokefamtv84924 жыл бұрын
The car is tuned and has catless down pipes you have to rev them pretty high since they dont run that much boost unless its tuned
@ant1353 жыл бұрын
were did you get the longer hose/what diameter was it?
@samwayne90003 жыл бұрын
Needed more sound clips
@aidanbeatzaidan76663 жыл бұрын
Will these be good on a e30?
@albundi705 жыл бұрын
merci beaucoup
@justinmakepeace36664 жыл бұрын
Was this for N54 or N55?
@oscarvee54154 жыл бұрын
Justin Makepeace n54
@ssgviper71474 жыл бұрын
2 guys 1 blowoff valve
@JM-rs9ml3 жыл бұрын
Can this be done on a x6 BMW
@inflatedmann5 жыл бұрын
Do you have to necessarily have to put a blow off valve on the charge pipe.. I’m trying to keep my 335i on the quiet side instead of the suction noise ??
@brokefamtv84925 жыл бұрын
No you dont have to put one on, VRSF actually sells charge pipes that will fit with your oem diverter valves 🤙
@abelsanchez48473 жыл бұрын
Bro I have so much trouble finding parts for my F10
@neiljanzen56134 жыл бұрын
Salsa de Valentina nice eres Mexicano?
@brokefamtv84924 жыл бұрын
Si bro lol
@haroldfana34913 жыл бұрын
my question is the car is turbo or not, can I install the blowoff to a bmw x5 e70 3.0si not turbo to get the same sound of the download ?????
@mauriciosanchez1443 жыл бұрын
No😂 this only works for turbo cars, this pipe and BOV are for releasing pressure from turbos...
@DikeLover3 жыл бұрын
LOL you need a turbo car for a blow off valve, and yes this car comes twin turbo 3.0 inline 6 from factory
@Built2spillrox135 жыл бұрын
Dood my VRSF charge pipe kit also came with a short vacuum line
@cire75554 жыл бұрын
William Ramirez same how did you fix the problem?
@Built2spillrox134 жыл бұрын
@@cire7555 yeah,I ended up replacing and upgrading all of the my vacuum lines from a very realiable and known in the N54 Community online store.
@GameOnMe4 жыл бұрын
What you get from a charge pipe
@brokefamtv84923 жыл бұрын
From Vrsf
@germanmartinez42123 жыл бұрын
Does it fit in a 06 325i
@javijavi41034 жыл бұрын
Me suscribi nadamás por qué bi la salsa Valentina saludos compas saben lo que es bueno
@CrazyCarMods4 жыл бұрын
Esa salsita esta buena 🤤
@brokefamtv84924 жыл бұрын
Jaja gracias compa! Pronto vamos a subir mas videos
@CrazyCarMods4 жыл бұрын
Yo Fam, no more videos? I haven't seen ya'll upload in a while. Ya doing good quality Videos 🔥 Are you still dropping content?
@brokefamtv84924 жыл бұрын
We should be back soon with some content! We been slacking due to some things coming up but we'll drop more videos soon! Thanks for the support!
@marioramos2394 жыл бұрын
BrokeFamTV wya man these videos dope !!
@habibithingzz3675 жыл бұрын
What size was the c clamp you used
@brokefamtv84923 жыл бұрын
I used the OEM clamp for the pipe, didn't buy a new one.
@Southladogangster5 жыл бұрын
🔥
@RocketCityMobileDetailing5 жыл бұрын
Is this Carrollton Georgia lol?
@brokefamtv84924 жыл бұрын
No, we're from Raleigh NC lol
@alexisalvarez8445 жыл бұрын
What year model is your bmw?🤔
@brokefamtv84925 жыл бұрын
It's a 2007
@luke40105 жыл бұрын
If i install both of these parts on my Z4 35i, do i need to get a tune for the changed air ratios?
@gilgonzalez59024 жыл бұрын
No you do not, but without the tune you wont get the horsepower gains either.
@brokefamtv84923 жыл бұрын
Exactly. Its just gonna sound louder
@MetaMikeG4 жыл бұрын
Would this work on a bmw 328i
@yezzusaguilar30974 жыл бұрын
It’s the n54 it’s not the same engine on a 328 e90, they don’t share the ama engine
@Ayo_zak5 жыл бұрын
Ya need to do more beamer vids
@brokefamtv84925 жыл бұрын
More coming soon! We been busy but we are working on more
@victorcoria15 жыл бұрын
Does this set up works with n55 motors?
@brokefamtv84925 жыл бұрын
It's a very similar set up. Vrsf offers some for the n55
@nickwallner3161 Жыл бұрын
16:52 to actually hear the bov
@Ach_tats5 жыл бұрын
How do you get that noise when reving
@julius92754 жыл бұрын
Andrew C.H you just rev
@prettyboyraul26332 жыл бұрын
I can’t hear my bov when I rev it either, I only hear it when I do pull, did you figure out why it doesn’t go off when you rev it?
@arguellojose184 жыл бұрын
Where can I get a shirt
@brokefamtv84923 жыл бұрын
Follow us on Instagram and I will make some more soon for sale! I made them myself
@jasonhalloween3 жыл бұрын
Straight risky starting it up and revving it without the air filter.
@mr.unknown5915 жыл бұрын
N55 or N54 ????
@BMWTHRASHER5 жыл бұрын
Muhammad Faris n54 noob
@yezzusaguilar30974 жыл бұрын
Does anyone know what the vacuum line is called, like the measurements
@mattylow_z344 жыл бұрын
Is what you're talking about inches of mercury, or Hg?
@CrazyCarMods4 жыл бұрын
You ask for a 5/32's Heater hose. That size will work well with the existing vacuum port on the manifold. That measures 4mm which falls under what the HKS BOV requires. Hks specifies that the vacuum line needs to be either 4mm to 6mm.
@topgun7794 жыл бұрын
@@CrazyCarMods we can get these usually at any hardware store?
@CrazyCarMods4 жыл бұрын
@@topgun779 Yeah, I dont see why they wouldn't. But I would think you will have better luck at any Auto parts store.
@topgun7794 жыл бұрын
@@CrazyCarMods also how long should i get 2 feet?
@roberto0612fcb5 жыл бұрын
@11:29 does the O ring come with vrsf charge pipe ?
@brokefamtv84925 жыл бұрын
No I had to use the old one bro
@yonglin77435 жыл бұрын
too bad n55 doesn't had bov
@leonardesnymanasa9172Ай бұрын
Moore Anthony Gonzalez Elizabeth Williams Angela
@unluckeeeee4 жыл бұрын
Sounds like shit tbh.. Maybe just the camera but plenty of better sounding out there..
@brokefamtv84923 жыл бұрын
Probably 🤷♂️
@8kdrei5 жыл бұрын
This is way to much work to replace a blow off valve..... smh bmw🤦🏽♂️