frame head is fully welded on now and paint preparation has started
Пікірлер: 15
@alexmittm2 жыл бұрын
great Job
@65vwbug873 жыл бұрын
The 2inch 3M 40 grit sand paper for a grinder works very well. Green color sand paper. Cheers
@davidconley36103 жыл бұрын
Excellent work!
@GT.Bugger4 жыл бұрын
Nice work, one thing I missed and regret not doing was welding a nut in place for the brake stop plate.
@melquisedecrosapimentel44762 жыл бұрын
Oi velha guarda curto muito esse tipo de projeto Very good, good Lucky.
@edmondcotter10143 жыл бұрын
good video thanks 👍
@chrismorfitt76423 жыл бұрын
Updates coming soon 👍🏻
@SparkoS782 жыл бұрын
So glad I found your channel. I'm have just removed body on my 68 and need a lot of replacement parts, might just go full frame head like you. Did you use anything to protect bare metal before shooting the epoxy primer. I can only work on it every now and then and don't know best way to protect bare metal before the full on primer coat??
@chrismorfitt76422 жыл бұрын
Hi mate yes epoxy is the best to put over bare metal its sealer so can stay in that and won’t rust over while you do the rest then when you come to paint it if it’s longer then 7days I believe some epoxy are different you just give it a good key then a wet coat of epoxy then your top coat
@RavFromUK4 жыл бұрын
Do you have a video of when you welded the frame head to the tunnel? I am doing mine soon it would be good to see as the removal of the head video helped.
@chrismorfitt76424 жыл бұрын
no sorry I tried to cover it best as I could in this video the tunnel slides into the frame head upto the raised bit that I pointed out then plug/seam welded just keep measuring as much as you can tack it in place measure again wish I got it on video now I was moving house at the same time so had a lot on.
@RavFromUK4 жыл бұрын
@@chrismorfitt7642 No worries, I think your video was the first I have watched that pointed out where the tunnel runs to. Great stuff keep it going.
@chrismorfitt76424 жыл бұрын
BenL cheers mate appreciate it 👍🏻
@elitefleet6402 Жыл бұрын
how did you get to weld the whole frame head on? as in lining it up straight too?
@chrismorfitt7642 Жыл бұрын
Measure measure measure that’s all I can really say I took loads of measurements from the original one to set points on the pan and if you look online you can find the proper measurement as well then tacked it in place and just kept checking I’ve seen some people make jigs as well