VW Caddy 2016 Spare Key, Using Xhorse Keytool Max

VW Caddy Spare Key Made
#urbancitylocksmiths

[@user-us1sf8id6u]

Nice

[@HDAB357]

Hi , with obd when adding key , no askin for pin code ?

[@vulcuremus250]

I have a 2018 Cady, which xhorse key model should I use? Do I need the smart key with the orange foil?

[@constantinnicolaescu5333]

VW CADDY 2016+ Transponder Megamos Crypto AES. "VAG MQB". ID49 / Silca: ID88. Or (depending of the country and model version) Megamos ID48 precoded ("dealer key").

[@marvelfancollection3690]

Hi.can a id48 chip be done via the obd2 port rather than cloning an existing master?

[@aloncramer3096]

Hi yes you can clone from obd 2 port. Depending what machine you using

[@abhiautotech1031]

Do we have to program original remote again though it is already programmed?

[@aloncramer3096]

Hi yes you would need too.

[@abhiautotech1031]

@@aloncramer3096 thanks for the info.

[@alazarbeyene4428]

Of course you have to program the remote part separately

[@mikemo-zf6ov]

i tried for Jetta 2015 but wasn't succeed, Xhorse super Model key, first i greatened the remote for Jetta 2015, then generated ID48 to the chip, but Autel couldn't recognize the key i only was able to learn remote..... i'm not an expert can you please give me some tips ....i'm using Mini tool key and Autel KM100 +xhorse super model key...thanks

[@HDAB357]

Hi , feed back please ?i am confuse ! In this vidéo no reading of pin code ? Ps: as uou i have km100 and xhorse pro

[@mikelsibs492]

Can this machine be used as a obd fault scanner

[@constantinnicolaescu5333]

Yes

[@alkprobest]

откуда вычитал пин код на видео этого нет если всё показываешь показывай честно всё а не юли

[@user-ul5vb2qh7u]

так ему пин код не нужен был абсолютно, чип то он не писал в голову, а копировал, для радиоканала пин не нужен)

[@dudleyremaps]

Don't need pin for chip clone friend

[@damiand7425]

What a waste of time, why not just add the key in normal way?

[@acquiescetcb]

😂 adding a new chip via OBD when you have a working key takes less than 5 minutes on this vehicle. Why would you waste over 2 hours of your life on this? Xhorse is a waste of time when cloning, not had one that has said any less than 1 hour. Wouldn’t dream of waiting that long to clone a chip.

[@Nicothekid1]

how?

[@acquiescetcb]

With loads of other tools, Autel, VVDI2, Zedfull etc. Also for cloning 48 chips much better and faster with KD-X2. Never waited more than 10 minutes for a 48 clone