VW FOX 2008 Alle Schlüssel verloren / lost keys / Immobilizer - Transponder programming

VW Fox Bj. 2008 Alle Schlüssel verloren
Dieses Video soll zeigen, dass Ihr mir Schloss und Tacho zuschicken könnt und ich Euch dafür Schlüssel fertigen kann.
Die ganze Prozedur kann auch direkt am Fahrzeug funktionieren ohne irgend etwas auszubauen.
Das Türschloss kann man direkt am Fahrzeug dekodieren. Den PIN-Code kann man über OBD bekommen ( hat bei mir in diesem Fall nicht funktioniert ).
Das anlernen der Funkfernbedienung funktioniert auch manuell ( d.h. auch ohne Diagnosegeräte ). Warum es hier nicht funktioniert hat weiss ich leider nicht. Habe es jedenfalls mehrmals versucht.
0:00 - 3:04 Türschloss und Tacho ausbauen
3:11 - 6:53 Türschloss dekodieren
6:54 - 7:41 Schlüsselbart fräsen
7:42 - 10:37 Daten Wegfahrsperre lesen
10:38 - 15:56 Transponder programmieren
16:46 - 20:13 Fernbedienung programmieren
VW Fox year 2008 all keys lost
This video is intended to show that you can send me a lock and speedometer and I can make keys for you.
The whole procedure can also work directly on the vehicle without removing anything.
The door lock can be decoded directly on the vehicle. You can get the PIN code via OBD (didn't work for me in this case).
The teaching of the remote control also works manually ( without diagnostic devices ). Unfortunately, I don't know why it didn't work here. Anyway, I've tried several times.
0:00 - 3:04 doorlock and speedometer removal
3:11 - 6:53 doorlock decoding
6:54 - 7:41 key cutting
7:42 - 10:37 immobilizer data reading
10:38 - 15:56 transponder programming
16:46 - 20:13 remote programming
ALLE AUF DIESEM KANAL VORKOMMENDEN MARKENNAMEN, WARENZEICHEN UND EINGETRAGENE WARENZEICHEN SIND EIGENTUM IHRER RECHTMÄSSIGEN EIGENTÜMER UND DIENEN NUR DER BESCHREIBUNG / VERANSCHAULICHUNG / IDENTIFIKATION
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY

[@salahautodiag2957]

Superbe vidéo comme toujours merci boss

[@schluesseldienst_muzler_de4067]

Avec plaisir

[@user-bz6cf8oh2g]

Thanks my friend. Very good information

[@Kamtronic]

Travail de vrais professionnels Merci

[@schluesseldienst_muzler_de4067]

Je te remercie

[@emregulseren314]

Good job, thanks for video

[@schluesseldienst_muzler_de4067]

Thank you. Enjoy

[@Unbekannt-ov5gb]

Super geiles Video

[@schluesseldienst_muzler_de4067]

Freut mich

[@user-wq6ix6sw5e]

good work, thanks

[@schluesseldienst_muzler_de4067]

Thanks Alexandr

[@Key-yv4lj]

super Video

[@schluesseldienst_muzler_de4067]

THX

[@DonPop90]

Super!

[@schluesseldienst_muzler_de4067]

Thank you

[@tsvetlinvlahov381]

Upa S programmer read it with tricks and hard too.Vvdi prog dont tested.Greetings from Bulgaria Great Job as Always ! Pin code from ECU and obd job why not ?

[@user-zy4ek3sg2q]

He could not. Because all owners of zed full must pay extra!😂

[@schluesseldienst_muzler_de4067]

Don't get pin by OBD. And i want to show that people can send me speedo and door lock.

[@schluesseldienst_muzler_de4067]

You can choose yearly lifs with ZED and then you can use as much as you want. But I hate this system too

[@rafailbabajew6994]

super

[@schluesseldienst_muzler_de4067]

Thanks 👍

[@monirkasemismail8397]

Thank you for your lessons.. I wish you would show in all your videos the location of the immo..because so far I have not found a good program to know the location of the eprom..in the car..there is only tango utility program..its name is mkr..only..if you You know another program.. I wish you would tell me its name and I will buy it. Thank you

[@namastesteven5655]

Does anyone know where the security pin code is located on the bin file once read?

[@ezanalmbtalsh5127]

Welcome Is the Mercedes remote programmed? WinZ W140 S 1998 model Can you do that

[@theKartoffel12]

Hi ich habe eine frage ich habe ein fox 2006 und habe xhorse schlüssel und ein autel im608 ich schaffe es nicht die Fernbedienung anzulernen hast du für mich ein tipp danke dir

[@tel200]

At last, A video showing how to use Orange-5 correctly. Read/Verify/Save and Write/Verify. And to use Verify/Modify/Verify when available Where is your Tango?

[@schluesseldienst_muzler_de4067]

Hi. Tango and vvdi are very similar. Because I've had vvdi for a while, I always use it first.

[@ashone185]

Vvdi prog Does not read this cluster ?

[@schluesseldienst_muzler_de4067]

I think I don't found it on prog. May be there it is !?

[@abiliobaulane5245]

Vvdi super chip work or need original megamo 48?

[@schluesseldienst_muzler_de4067]

I think super chip will work too

[@keyherobln]

where did you found the picutre?

[@schluesseldienst_muzler_de4067]

It is in the instructions of Orange5

[@danielfelixsilva2002]

Do you have more vídeos?

[@schluesseldienst_muzler_de4067]

Hi. Yes i have

[@Irf890]

❤❤❤

[@abiliobaulane5245]

Vvdi super chip work or need original megamo 48?

[@schluesseldienst_muzler_de4067]

You can use super chip. ID48 is cheaper