VW Golf 5 airbag resistor for aftermarket seat w/o side airbag

[@Jan_Seidel]

Great idea... without key.. You have to disconnect the battery and wait at least 30 minutes for any capacity to discharge. Otherwise you may kick off the airbags

[@jankindl915]

no

[@ErikL-q8h]

Thank you worked on 2009 tiquan

[@gerard_iriart9495]

Hi, do you think you can help me to know in which colors it connects to both the dashboard airbag and the steering wheel airbag? has a way to apply the adapter?

[@i30n_fb]

how did you know what pins to use? mine is a 4 pin connected and i don’t know what one to use

[@GVH5150]

Hi, I really could use some help! #goingcrazy I have a 2010 VW Sharan. The new seats in the BACK/REAR do not have airbags but two plugs that need to be fixed :). I bought a lot of different resistors but do not know which one is the right one and which color cables in the plug to connect

[@iulianenache2425]

Hi, I hope you can help me with this.. what resistor ohm i need for seats audi a4 2012 b8 Thank you

[@lesleyavery7166]

Good video but needs subtitles for the hard of hearing

[@slavizelenkov]

3,2 OHM 2W 5%

[@TouaregTDIRLine]

@golf Wagen how did you determine what ohm to use?

[@CarlosJimenez-zl5xg]

Ola buenas keria comentar esa risintencia sirbe para nular cuadelimetro

[@ErikL-q8h]

3 ohm. Or 3 1 ohm in series

[@Angelosp99]

Tienes enlace para comprar la resistencia?

[@tariq3877]

How do u disable curtain airbags with only 2 wires

[@Mike-tm2tx]

Need to shift SRS on mine. Not sure which pins to use

[@alexe610]

Thank you very much for sharing. From France.

[@comfortablynumb8832]

I’ve removed the airbag seats a couple of times I disconnected the battery then the airbag, then re connected the airbag cables then reconnected the battery, would this method work on the resistor bypass or will I still need to re program

[@claustile5122]

Reprogram

[@ПавелЕженков]

Hi, how did you disable the passenger position sensor?

[@ПавелЕженков]

@@candyman9816 no

[@pajaocz8211]

Ahoj prosimtě, chtěl bych se zeptat jaky typ přesně toho resistoru tam máš.

[@golfwagen4173]

prišiel so do obchodu GM Electronic a povedal som dajte mi 3 ohmovy odpor.

[@pajaocz8211]

@@golfwagen4173 ok super děkuji 😅

[@asadnasser4320]

I have MK5 R32 2006 Belt tensioner igniter ( driver side) upper limit exceeded code Which resistance should I use to disable code ??

[@rodrigomichel25]

Perfect !!! Thank's brother !!!!

[@candyman9816]

So did it work for you?

[@seh97]

Hi exactly what type of resistor did you use?

[@gabo7511]

Hhv

[@vr6hgp222]

How many watt 5 ore 10

[@skodexpress5544]

j ai fait sur skoda octavia 2 et ca marche !!!!!

[@santosanto9356]

Como fizeste eu tenho o mesmo problema skoda octavia 3 2017 E o banco lado direito tem de ser feito no conector debaixo do banco lado direito ou e tudo feito no banco da esquerda ??

[@josete]

Thank you thank you thank you,

[@yangyang-et9wn]

i believe if you plug that resister in to a wrong slot,the airbag will pop?if you have a airbag light but not sure if there is an airbag.you just want the light to go off.

[@comfortablynumb8832]

How will the air bag pop if it’s not connected you fucking spaz

[@sunilbfd5268]

@@comfortablynumb8832 lmao exactly

[@richwood4196]

@@comfortablynumb8832 😄😄😄

[@Hellohellohello6969]

This is to emulate an airbag being there, why would you do this if the airbag is still there?! He is showing you how to fix the light if you install aftermarket seats or steering wheel with no airbag 👍

[@Hellohellohello6969]

Also that is unlikely to happen seeing as it’s a resistor…

[@vwjet357]

Anyone try this? Would a 4.7 ohm 2 watt resistor work?

[@vwjet357]

I tried the 4.7ohm resistor and it worked 👌. I made a plug and play bypass plug with it.

[@candyman9816]

@@vwjet357 can you explain how you made that plug and play bypass please?

[@readit945]

Don't work

[@Hellohellohello6969]

You mean you couldn’t do it..

[@readit945]

@@Hellohellohello6969 I just brought new heated seats lol

[@skodexpress5544]

j ai fait sur skoda octavia 2 et ca marche !!!!!

[@skodexpress5544]

j ai fait sur skoda octavia 2 et ca marche !!!!!