VW Golf MK7 (5G) RVC High retrofit, part 2: wiring camera

[@mrfixpl]

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

[@danielpghe]

The best tutorial for rear camera retrofit by far no#1. Thank you, a lot!

[@10plm46]

I was waiting for this tutorial with those tips and tricks also all those "mistakes" are like a cherry on cake, making this clip satisfying to watch and learn from it. Excellent job! and thank you for sharing your knowledge with us!!

[@mrfixpl]

Happy to help!

[@Masterkiller931]

Thank you for this kind of videos, you helped me alot to install a highline camera on my mk7.5 golf .

[@mrfixpl]

Happy to help!

[@chloeleedow7250]

When cursed with the fuse not going in first time I felt that in my soul cos that's exactly what would happen to me and I'd have a minor tantrum 🤣 I think people that can do these retrofits are better than vw techs that do it at a factory because it's way more difficult to do pulling everything apart they just whack it in when the car is mostly empty no risk of breaking anything no wondering where things go back because they would be following an process they do all day every day millions of cars. I think you did a great job and showing the mistakes is better than not showing them because it gives others an idea of what might catch them out. 💪

[@ralfseidemann8460]

Thanks a lot for this very very helpful video. I also achieved to install a rear view cam into my golf 👍

[@mrfixpl]

🔥

[@hobbykip]

O.m.g. just finished installing my rvc in the Passat B8. Luckily I was able to reach the fuse box without disassembling the center console but adding this fuse was absolutely the worst job I ever did! The purple lock tab does not pop out easily! Anyway, thanks for the awesome detailed tutorial! I would not have done it myself if this information was not available. Small addition for the 1st video, if you want to test it yourself and already have the wireloom from Ali do not forget to wire the ground (chassis) cable to the brown cable that eventually will go into the old trunk release connector so the camera has a ground return path to function.

[@ukaszkwiecinski1781]

you don’t have to connect it to the fusebox, you can just put it into the mib2 power cable

[@nelsondacunha2497]

@@ukaszkwiecinski1781 red or brown one?

[@sHpAaKu316]

Barzdzo dobry instruktarz. Polecam naprawić przelotki w klapie. Widać złamane zapinki. Da się to uratować.

[@mrfixpl]

Dzięki! Mam zamiar zrobić z druku 3D reperaturki.

[@janvodrazka6448]

Świetna robota, dzięki, to bardzo pomogło.

[@makaroniarz]

Amazing 😲 my car is waiting for you 🎥😁

[@kevindekeerle3345]

This summer I installed a RVC on my GOLF MK6 estate. It took me 2 days to finish everything

[@pro-auto9958]

Muchas gracias por dar este tuturial super muy bien detallado!!

[@thespecialist786]

Mr Fix, please can you help from your knowledge, I have installed the camera in the Golf MK7, all works. I used the 12v direct supply from the infotainment unit. Red wire and not used the one from fuse box. All works as expected. Just one issue and not sure if I am missing something from coding, the When I lock the car and come back after a while the camera opens but no display the unit does not do anything until I hold a the button and do a hard reboot and then it starts working again. I have to do this each time when I lock the vehicle. Can you please be so kind and guide me what you think could be the issue. Is the red wire going to the fuse essential ? because the Infotainment system also has the same direct 12v supply I believe.

[@thespecialist786]

Hi, Thankyou for this video, I notice some Camera's have a drain tube why does this one not have that ?

[@mrfixpl]

estate/variant/kombi/wagen and hatchback cameras have different shape of the drain. and sometimes on used ones it's just missing.

[@thespecialist786]

@@mrfixpl Thank you for your response, I have subscribed to your channel and also bought OBD Eleven from your link. It seems they give credits on every change I make to the car which is pain because I am just testing the software. How do I get unlimted options.

[@escadamagnesim]

Hi That's very good video !Help alot with installing Pin 6 it's black cable colour?(video signal)or Pin 12 it's black?

[@jonascohen]

Hi little question: is the number in the fusebox important ? I had a Polo 6C that don’t have fuse for rear camera so I wonder if there is a problem if I take one no matter which ? thank you so much for your videos !

[@ravi270783]

Can you please post the factory wiring diagram for the camera, pop out mechanism, trunk release, video signal and power if possible here or on the forum ? I am upgrading mine from the RVC low, wondering how much of the existing wiring loom I can reuse., thinking I will be fine to just run the 2 can bus wires from the trunk to the mib unit.

[@heinvos4839]

Hi i like Your instructies films but i would like to know where do you bye Your lights and kabels they look very good thanks

[@YS-lv4tu]

Hi, very nicely explained. Thank you. Would it be possible to do it on 2023 T-Roc? using the same wiring ? i have found the camera online from same year and model T-Roc.

[@herrscher911]

Thank you for your work! But I don‘t understand why you do not use simply a fusetap on a fuse from the 12V charger for example?

[@souf2314]

Hey man nice video i have a question on 16:30 i know you have to put the 2 wires in the small black thing ( dont know the name..) mine was closed and i dont know how to get it open? Do you know how to get it open because i see yours was open. I appreciate it! And also i ceep two cabels left the brown one i think that is for the grond and also white one only i dont know for what that one is.

[@DalvanBoy]

Vc tem vídeo estalado o sistema digital tela do ar-condicionado do golf MK7

[@КонстантинРаковский-л3в]

The only thing I have as a question. Do I need to connect it to a reverse lamp wire ? Or not ? Or it works somehow from the module box in the glove box compartment ?

[@mrfixpl]

RVC-High is connected to CAN-BUS network and will communicate with the vehicle this way. No need to tap into reverse light.

[@КонстантинРаковский-л3в]

@@mrfixpl thanx a lot you just saved me 2-3h of he'll outside in -3 weather figuring out what da he'll I should do with the wiering .

[@КонстантинРаковский-л3в]

Does chinees camera conflict with the system of other blocks in the passat when you connect to can-bus ? Because over time I started to get random errors like component protection of airbags , but my car wasn't stolen, units wasn't changed or damaged.

[@abdulsamad7716]

I am not a pro into this field, would it be possible that you recommend any workshop in Germany or Poland or if you offer installation please do let me know. I need retrofit back camera and sensors installation

[@DimaLegoFUN]

Why you didn't release this video yearlier, i just inbstalled high camera on karoq, and didnt understand the situations with pins and grey socket so i have to extract pins with orange/purple and orange/brown cables but i inject cables from camera to those wires....

[@FILking-p2z]

Bro reversa conect 12v+ for rear light or no?

[@farrkhi]

Hi, your videos are really great and well explained. Got a question for you, Can i use this camera for VW Touran 2017??? Thanks

[@mrfixpl]

Not sure if you can. Might require reflashing, parameterization and/or calibration for your vehicle.

[@mouraddi6445]

Friend can you tell me what camera you use in the rear windshield as surveillance ? Any link where to buy from or a name how is the quality and if possible a video as review thanks in advance i want buy one but there is too many you're using the camera so you will have a feedback about i appreciate you ansewr and keep going

[@mrfixpl]

VIOFO A139. kzbin.info/www/bejne/jnqYmpKkrdB3g8k

[@nelsondacunha2497]

Hey, a great tutorial. I'm currently installing the camera and have the following problem. I mounted the camera and connected the cables to the camera and connected the trunk release conector brown/brown and pink/pink but it can't be opened. What am I doing wrong? Can you give me a tip?

[@СерёжаНоур-т3ы]

Hi, did you solve the issue? I have some problem

[@wizzinnova3958]

mr fix i did those steps but in the screen it shows no can message without tracing guide lines

[@mrfixpl]

If the camera is new, it will require parameterization (can be done with VCP) and calibration on the board.

[@bondvaga1928]

I want to mount the reversing camera on the golf mk7.5 2018 estate model that is placed in the license plate lamp and I found several variants with different video signals. Can you please tell me what signal the discover media mib 2 3Q0035846B unit supports? thank you very much!

[@bbdm2500]

Hello mr-fix. I have Door opener with camera installed and door opener plug connected purple and brown for testing. Door doesn't open 😢. Do I have to code it. Did it work for you?

[@СерёжаНоур-т3ы]

Hello, did you solve the problem? I have same issue. Maybe you can help me?

[@TheYoungExplorerYT]

I have that issue too

[@AbdulKalam-fv9lg]

Hi. Thanks for the help. I just installed this but I got a error for ‘no basic setting’ assuming it needs calibration? Is this something anyone can help with

[@mrfixpl]

I believe you need ODIS to perform it. And the calibration board that's required for the procedure.

[@jsmits8]

I’m going to install mine soon. I have a lowline so some minor differences. Is it necessary to use the fusebox or can I use a wire with a fuse and receive power from the quadlock?

[@jsmits8]

Oke, installed mine today, tried to piggyback from the quadlock with a fuse connector, works like a charm. Again it is a lowline. But together with the PDC is more than enough for me. I'm very happy. Btw OBD11 has a app for the camera now, which works perfect.

[@umair87able]

Hi i got Vw Golf estate 2016 Uk Model i installed same camera from Ali express did follow your wiring way now boot latch is working but camera it self not coming out and Reverse display only shows Black.Did coading too from your other video Some of them not available in my model. Any suggestions Please

[@JamesLee-dr3nq]

i have RNS510 stereo and connect to same your one rear camera, but all wire I connect, not change for my monitor, can you tell me what for the blue plug ? and what cable need install pin 6 and 12 please?

[@Krkbiker]

Zrób jak dodać radar ACC, gdzie połączyć kable w budzie. Na necie nic nie ma praktycznie oprócz polskiej instrukcji ale tam ciężko to jest opisane.

[@Ninja7Killer]

Hello, i have a question. How did u get it to open via the park sensors button, mine works only when i put it in reverse - thats how i was told to connect it , to the reverse light. Can i move that wire somewhere so it opens with sensor button?

[@jorgeguerra-yw2xh]

Hi, thanks for your video. It was been very helpful. I installed low line reverse camera with fixed guide lines, it’s working but sometimes I get a message on screen “park pilot currently not available “ and camera won’t show image. My car does not have parking sensors or anything. Can you advise please?

[@florincogean8525]

Hey man! How's your camera? I have installed it today but I couldn't make it work so far, I guess is all about coddling. MK8 Golf 2021.

[@sonogenio]

Min 26:08 Sei genio 😅 wow!!

[@SameerKhan-pz7df]

Dose it have to be coded before installing

[@basmoormann8467]

How dit you calibrate the camera?

[@mrfixpl]

Didn't yet. I found 2nd hand camera that was already calibrated on the previous vehicle.

[@-JPS-]

Hi, how did you release the fuse box? It's very difficult. It's impossible for me to let go like you do.

[@deathdragon1987]

Would carista be able to unlock dev mode in seat or would I need obd11?

[@mderoukakis]

What is the part number you used for the VW emblem camera? Thanks :)

[@deathdragon1987]

Thanks, will I also need to install se_zr_p0369t_fec_all_cid_off_sport_fixed? And If so, how? Is it through Dev menu?

[@vaggos4]

Hello I’m having an issue and I need your help. Lately without any change or coding the map on aid stopped showing. I scanned the car and there was a static fault in 5F module U10C000 - Control module for instrument panel insert on optical data bus No communication the module is 3G0035043K with firmware 1156. Do you believe is firmware relevant issue or I should be ready for a module breakdown? I don’t gaper any error on aid but th maps won’t show up even with hard reset of the 5F. I really need your help. Did you ever encounter this?

[@zybizybi7367]

Hej. Czy z tyłu tej całej płyty z bezpiecznikami jest wystarczająco dużo miejsca, aby palcami wsadzić kabelek z końcówką na wystający męski pin od terminala +15?

[@jacekdroid7349]

Nagrywasz świetne tutoriale. Dzięki Tobie zamontowałem kamerę cofania (co prawda LOW) i planuję kolejne modyfikacje w aucie na podstawie Twoich filmów/inspiracji. A odnośnie tego filmu, to brakuje mi tylko informacji którędy poprowadzić przewód zasilający (do pinu 18) pod kierownicą - domyślam się, że puściłeś go pod wykładzinę, przed pedałami? Czy jest jakiś sposób, aby zrobić to bliżej temu co robi "fabyka" ?

[@rafaello4422]

Cześć. Czy kamerę low podpinamy analogicznie do tej high?

[@Dimaximus_]

После просмотра этого видео я твердо решил, что не буду ставить камеру заднего вида. Нужно разобрать половину машины, чтобы вставить чертову камеру!

[@wasyl5790]

Cześć. Gdzie kupiłeś ten cały zestaw łącznie z kablami. Dzięki. Pozdrawiam

[@mrfixpl]

Wiązka na AliExpress

[@slowflnger]

Why not draw the wires down the drivers side, lot less work

[@mrfixpl]

I still need to wire CAN-BUS and video signal to the main unit in the glove box on the passenger side, so....

[@marouaneelcharif6234]

Do i have to pull wires if i already have low camera installed?

[@mrfixpl]

yes. You don't have CAN-BUS from MIB to camera.

[@deathdragon1987]

What's the upgrade for MST2_EU_SE_ZR_P0363T?

[@mrfixpl]

P0369T

[@deathdragon1987]

@@mrfixpl Thanks, will I also need to patch se_zr_p0369t_fec_all_cid_off_sport_fixed? And If so, how? Is it through Dev menu like previous firmware upgrade?

[@mrfixpl]

@@deathdragon1987 depends what you want to do.

[@sofianemeryoul8128]

How to unlock the unit 😭😭

[@micha3864]

Cześć. Ciekawe tutorIale. Chcę założyć kamerę high do e-golfa z 20r. Wychodzi że powinna być z nr 5H0827469H lub R lub T Możesz to potwierdzić? Ciężko taką znaleźć. Ewentualnie kupić Low i zamienić kamerkę. Czy nr 5Q0980556B bedzie ok? Podobno musi mieć wgrany odpowiedni soft.

[@mrfixpl]

2020 to MK7 czy już MK8?

[@micha3864]

@@mrfixpl e-golf był tylko Mk7

[@micha3864]

Jaki nr komponentu pokazuje VCDS jak wejdziesz w sterownik kamery? U mnie coś inaczej jest w tym aucie np. Niema sterownika kierownicy. Kierownicę koduje się w getwayu.

[@MercSLRFan]

I would have considered doing this had VW left the harness in place. Running the wires is too big of a job and the potential for rattles afterwards too great!

[@soulboyvgc7546]

hi, I want to decode MST2_EU_VW_PQ PO245T. H25.14.78-201507211616 software. Can you please help. TIA

[@golubot]

you just convinced me not to do this

[@mrfixpl]

Well, good thing that you checked the procedure before starting the job.

[@freelockuk]

hi great video...how can i work out if its high or low camera...i have 5G0827469S

[@SLMZ8]

I feel ur tired 😫

[@mrfixpl]

It the weather 😅