VW Golf MK7 (5G) RVC High retrofit, part 3: coding

Performing #coding of RVC-High #camera in VW Golf MK7 with OBDeleven. This can be done with VCDS as well. Step-by-step tutorial of adding module to gateway, setting communication with infotainment and parktronic, adjusting camera options and vehicle parameters, clearing faults.
🚗 This tutorial was made in 2015 Volkswagen Golf MK7 with MIB2 Discover Media infotainment system. Coding in other VAG vehicles (Audi, #VW, Seat, Skoda) will be similar.
🎥 I bought 2nd-hand camera. This means that it was already parameterized, coded, and calibrated. Parameteriziation was correct for my vehicle, coding required some adjustments, calibration is still pending. If you get fresh camera you will have to parameterize it with correct dataset.
💻 Add new module to gateway installation list
19 → adaptation → Installation list → specified installations - Camera System Rear View → coded
💻 Disable RVC-LOW and enable RVC-HIGH in MIB module
5F → Long Coding → Byte: 19 → Bit: 4 → disable
5F → adaptation → Car Function List BAP Gen2 → VPS_0x0B → activated
5F → adaptation → Car Function List BAP Gen2 → VPS_0x0B_msg_bus → Comfort data bus
💻 Enable camera support in parktronic module
Some cars will have module 0x76 available instead of 0x10.
10 → Long Coding → Byte: 02 → Bit: 4 → enable
10 → Long Coding → Byte: 02 → Bit: 5 → disable
💻 Enable camera BAP communication
6C → Long Coding → Byte: 10 → Bit 6 BAP for display data
💻 Code vehicle and region
6C → Long Coding → Byte: 00 → vehicle brand
6C → Long Coding → Byte: 01 → vehicle class and generation
6C → Long Coding → Byte: 02 → vehicle body type
6C → Long Coding → Byte: 03 → region
💻 Code vehicle optional equipment
6C → Long Coding → Byte: 04 → Bit 0 Trailer Control Unit (J345) installed
6C → Long Coding → Byte: 04 → Bit 1 Optical Parking Sensors (OPS) installed
6C → Long Coding → Byte: 04 → Bit 2 ParkSteer Assist (PLA) installed
6C → Long Coding → Byte: 04 → Bit 5 DSG/Automatic Transmission installed
6C → Long Coding → Byte: 04 → Bit 6 Swinging Logo installed
6C → Long Coding → Byte: 04 → Bit 7 Electric Parking Brake (EPB) installed
6C → Long Coding → Byte: 10 → Bit 2 Trailer Towing Assistant (TTA/ARA) Mechanical installed
6C → Long Coding → Byte: 10 → Bit 3 Trailer Towing Assistant (TTA/ARA) Optical installed
6C → Long Coding → Byte: 10 → Bit 4 Tow Bar (AHK) installed
6C → Long Coding → Byte: 10 → Bit 5 Rollback recognition
💻 Enable all 4 view modes in camera module
6C → Long Coding → Byte: 07 → Bit: 0 → enable (standard 90° view)
6C → Long Coding → Byte: 07 → Bit: 1 → enable (parallel parking assist view)
6C → Long Coding → Byte: 07 → Bit: 2 → enable (towing view)
6C → Long Coding → Byte: 07 → Bit: 4 → enable (fish-eye/cross-traffic view)
💻 Additional light when using camera
This will turn on welcome lights fitted under side mirrors to improve visibility. This feature was designed to 360 Area View (4 camera system), but you can use it with RVC High as well.
6C → Long Coding → Byte: 08 → Bit: 2 → enable (manoeuvre light)
09 → Security Access → Code: 31347
09 → Adaptation → Aussenlicht_uebergreifend - Umfeldleuchte als Manoevrierleuchte → enable
💻 Hide parking sensor image overlay by default
5F → Long Coding → Byte: 16 → Bit: 7 → enable (hide sensors overlay by default)
📺 RVC High retrofit, part 1: rear view camera test: • VW Golf MK7 (5G) RVC H...
📺 RVC High retrofit, part 2: • VW Golf MK7 (5G) RVC H...
🛒 OBDeleven: mr-fix.info/redirect/obdeleven
0:00 Rear View Camera Highline retrofit coding
0:23 Use OBDeleven, VCDS, or whatever you have
0:41 Used camera came with parameterization.
1:10 Overview of the procedure
3:23 Add camera module to gateway installation list
4:30 Code communication between MIB2 and RVC
5:35 Coding the parktronic system
6:20 Reconnect to refresh modules list
7:02 Review RVC faults and coding
9:03 Test the Highline camera
✅ mr-fix.info/​
✅ Facebook: / ​
✅ Instagram: / ​
✅ Patreon: / mrfixpl

[@mrfixpl]

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

[@duczmal]

hej, mam problem wykonalem wszystkie czynnośći do 6C- teraz mam moduł 6C swieci sie na czarno (reszta zielono i czerwono) ale ODB11 nie chce się z nim połączyć. wiesz gdzie może być przyczyna?

[@tomken18]

which type of OBD11 do you recommend buying? Nice video thanks

[@DerSpuk73]

Thank you, works perfect with my 2019 GTi PP and OBDeleven

[@yuriikucheriavyi7426]

As for starting camera with hidden vehicle icon you can enable 'Legal_screen' and 'Legal_screen_guidelines' in 6C coding

[@lastquincy839]

Awesome video. Can you tell me where you found power for the dash cam you used as the reverse camera?

[@jasonbudd7805]

I have a basic settings fault code, but everything works great. Can it be cleared by entering basic settings with the latest obd11 pro license?

[@umar2gud]

Great job as always. I recently watched your video about installation of front view camera. But you have dont it manually by adding a rely which is time and effort saving. But is there a way to intergate the front camera to the headunit like area view(360 view) ? I have seen area view you can choose individual camera from the modes like on 9:33? If you find some thing about area view please do share. Retrofitting area view is like very hard as far as i say but doing something like you did with front camera and integrate with headunit will be amazing. Thanks

[@JensKamp]

Hello. I have a OEM camera on my Skoda Octavia 5e. It’s possible to switch the camera on with the parking button ? Thanks.

[@renevenema3587]

This is a very nice tutorial! I have an interesting question. I bought a used highline camera from a 2015 Passat station (number: 3G0827469H), do you happen to know if I could install this in a Polo 6C from 2017 following the same instructions for Golf mk7?

[@jhsys]

Great video! Perfect instructions. However for my Vw Transporter T6, m/y 2018, OBDeleven on Android and Nextgen device, my channel list in Adaption of 19 Gateway is empty! It just asks med to enter a channel number... How to fix this? Do I have to have the hood open?

[@alpersinansahin]

When I Press the Parking Button I can only see OPS not camera. But When I did Transmission R I can see Review Camera and Ops sametime. is It possibke the reprogramming the Parking Button to show me Review Camera ?

[@majklxxx]

stil not sure how to code BAP2 .. if to Terminal 15, Comfot, Infotainment ? internet is not clear with this...can wrong parameter do blank screen for 1s randomly ?

[@KaizokuGari]

I have a problem, I installed it, when I put Rear gear everything work fine, but if I press just the Parking button, nothing happen on Mib, I can ear just the sound of parking sensors, but I can't see anything on 5f, how can I solve?

[@jimmy282304]

I installed a low line but I'm having an issue that I have to keep resetting my infotainment screen everytime I start the car for the video feed to show

[@aleexxbgr]

Do u have original settings for 360 ° I want to set in my vw passat I have oem 4 camera

[@Daan0317]

Do you know if highline camera uses AHD or CVBS?

[@emphak]

Hello. Do you know what long coding for the tiguan MK2 towing view and 3 other view is ? Its in 76 long coding but don t know the byte and can t find anywhere ?

[@marco1991cn]

Best youtube channel ever.

[@mrfixpl]

🔥🔥🔥

[@claudiu1178]

Can i make my original camera also with this settings? Thank you

[@MrKamilBk]

cześć, w jaki sposób mogę uruchomić kamerę z przycisku park assist widzę że u Ciebie to działa u mnie mogę tylko wyłączyć ekran kamery..

[@tarektraia9478]

bonjour, j'ai installé un cockpit chinois sur ma golf 7 et le Cruise ne fonctionne pas en mode régulateur de vitesse mais fonctionne en mode limitateur de vitesse, pourriez vous svp m'aider. merci

[@RB-ud2ix]

Witam super sprawa , mam pytanie czy dasz radę rozgryźć jak zakodować w Audi A3 8v wskaźnik aktualnego biegu na wiem ze jest widoczny bieg w pozycji sport manual ale już w D nic nie pokazuje. Wersje europejskie z tego co widziałem maja to odblokowane i na D widać na jakim aktualnie biegu jedzie … . Szukałem wszędzie i bardzo dużo osób chce to zrobić i nie dają rady nawet forum „OBD11” , z tego co wiem to przy zmianie sortu skrzyni na stage1 automatycznie już to zmienia ale nie każdy chce to zrobić i nie każdego na to stać. Z gory dzięki na pewno w imieniu wielu osób . Pozdrawiam

[@-JPS-]

Hola, en el minuto 7:44 . Tengo un Golf 7.5 hatchback 2018. Que datos pondría en : Vehicle class, Car generation, Vehicle variant?

[@marcosangulo2564]

What about if I don't have parktronic module 10/76

[@Rappasta]

can this work in seat leon 5f 2016?

[@erikkupculik7268]

Mr-fix do you have the part number of your Camera ?

[@haniidrees361]

Hello, how do I add a camera to a golf mk8? I would be happy to reply, please

[@vaskrol]

Hello! Excuse me, could you please share if you by any chance know how to do that for the next gen platform (Leon 4 / Golf 8)? I've lost the camera on my Seat Leon KL (4th gen). I installed a new one camera, set up the vehicle data in 6C using ObdEleven but it still doesn't work and throws an error :(

[@garethgwilliam]

Your videos have helped me with so many retrofits. Might be worth removing the maneuver light coding in your description on this though, looks like if you dont have AreaView it doesnt actually work and just throws a Databus missing message on the Central Electonics module (09). Just spent months trying to find where that fault came from. Other forums say it doesnt work too. Did you manage to get it to behave as expected?

[@antiPopOLEG]

Thanks for great video guide and so detailed explanation. I have one offtop question: where did you connect the charging cable which is in the air vent?

[@mrfixpl]

5mm hole in the air duct, cable goes under the instrument cluster to the fuse box, connects to dc-to-dc converted which is connected to one of the fuses with a fuse tap.

[@charlesmuller667]

Good day sir can you please help me. Can u check for me if my headunit can be updated. My current version is: MENS_EU_VW_P6410L.

[@zeyneb.Ferset]

Bro how to work video clip I can’t play video clip for wv jetta

[@charlesmuller667]

Whats the difference between high and low camera settings

[@alirasheed6357]

Great work

[@mrfixpl]

Thanks!

[@mhirichiheb8549]

give me along coding 6c (j772) for the 5Q0 980 556 B thanks

[@useruseraa885]

anyone got data set for golf 7 high line camera thanks

[@brandonsoto98]

I wonder if there’s a way to add those lines like the red,yellow and green to my mk7 gti when reverse.

[@HaKaNFR01]

same question here. I have now a read camera but I don't have these lines... thanks!

[@ravi270783]

Great work., thanks for making this video, its very helpful. Understand you got a used camera module, did you have to parameterize/flash it with ODIS or had to calibrate it with VAS6350 tool ?

[@mrfixpl]

I was lucky enough to get used camera from the same type of vehicle as mine, so it came properly parameterized and calibrated good enough. But I want to calibrate it and maybe one day I will do it while making tutorial about it.

[@unleashyourcar7618]

. @mrfixpl waiting for that... without calibration the camera start sending image or stay black? i have obdeleven but not have odis

[@shaagealgareb9189]

thank you dear

[@zeewin]

Thanks for the great work, all done on mine but I got a 'Camera not calibrated' error pending for solution. Any idea, please?

[@anurrba]

I got the same problem. My camera is not working….

[@TheSimon253]

Is there a list of what hexcode represent which control module? You said 5F was control module?

[@mrfixpl]

01 is engine, 02 automatic transmission, 03 ABS/ESP, 09 BCM, 17 instrument cluster, 19 gateway, 56 radio, 5F infotainment, 6C rear view camera, 10/76 parktronic.

[@TheSimon253]

@@mrfixpl nice! Is there a complete list of all control modules somewhere?

[@ronaldrice8458]

where do i find the below for Audi A1 💻 Code vehicle and region 6C → Long Coding → Byte: 00 → vehicle brand 6C → Long Coding → Byte: 01 → vehicle class and generation 6C → Long Coding → Byte: 02 → vehicle body type 6C → Long Coding → Byte: 03 → region

[@mrfixpl]

Check your 5F module. Most likely it will use the same 4 bytes.

[@davide7629]

Hi. I have a rvc high installed on a Passat B8. The camera is new and the coding in module "6C" are all "zero". I can't find the access code to change the parameters (I use VCDS). And I don't know what values to insert. Do you have any information about it? Thanks!

[@mrfixpl]

I believe you need parameterization first. This can not be done with VCDS.

[@davide7629]

@@mrfixpl thanks for info...

[@vasilemihai2140]

Ciao MR-FIX Anche io ho comprato una telecamera nuova originale non parametrizzata per una Passat B8 del 2019 e non riesco modificare niente su codifica lunga e tutto a zero,quindi cosa devo fare devo andare in un officina wolskvagen o esiste un altra possibilità?Io sono in possesso di ODBELEVEN PRO

[@annefrankfurt9346]

@@mrfixpl which program is required?

[@george51985]

Hei, nice work. Can you tell which are the parts no. needed? Thanks

[@mrfixpl]

VW Golf MK7 hatchback: 5G0-827-469-H; 5G0-827-469-P; 5G0-827-469-R; 5G0-827-469-T, 5G0-827-469-AF VW Golf MK7 estate/variant: 5G9-827-469-G; 5G9-827-469-H; 5G9-827-469-Q; 5G9-827-469-S; 5G9-827-469-AA, 5G9-827-469-AG, 5G9-827-469-AJ. VW Golf sportvan: 510-827-469-E, 510-827-469-G, 3G0-827-469-BL, 3G0-827-469-CA, 3G0-827-469-CJ, 3G0-827-469-FL, 3G0-827-469-FS. VW Passat B8 estate/variant and Arteon coupé with back glass high polished logo: 3G0-827-469-E, 3G0-827-469-H, 3G0-827-469-E, 3G0-827-469-L, 3G0-827-469-AA, 3G0-827-469-AQ, 3G0-827-469-BB, 3G0-827-469-BJ, 3G0-827-469-BL, 3G0-827-469-BS, 3G0-827-469-CA, 3G0-827-469-CG, 3G0-827-469-CJ, 3G0-827-469-FL, 3G0-827-469-FL, 3G0-827-469-FS, 3G0-827-469-GC, 3G0-827-469-HN. VW Passat B8 estate/variant and Arteon coupé with black/bright chrome logo (new logo from 2020): 3G0-827-469-EK, 3G0-827-469-ER, 3G0-827-469-FE, 3G0-827-469-HE. VW Passat B8 sedan and Arteon sportback with back high glass polished logo: 3G0-827-469-F, 3G0-827-469-CD, 3G0-827-469-FM, 3G0-827-469-FT, 3G0-827-469-HK. VW Passat B8 sedan and Arteon sportback with black/bright chrome logo (new 2020 VW logo): 3G0-827-469-EG, 3G0-827-469-EN, 3G0-827-469-FL, 3G0-827-469-FH, 3G0-827-469-HB.

[@butucd]

Hi. I try to connect rear camera, all steps like yours. But for me, 6C have black background, not red, like yours. What can be the problem? Thank you!

[@mrfixpl]

Is your camera connected properly to CAN-BUS network?

[@butucd]

@@mrfixpl blue cable on rev lights, red and black on green socket in back of CD box( i think that is canbus), white cable take”+” from lights, inside.

[@sharkdu6969]

Hello sir, have you solved your problem? because I have the same problem actualy

[@RodrigoRodrigues-k4n]

Can you provide the coding for Tiguan MK2 please

[@Magdaddy1973]

Hello Mr fix. fantastic channel 😊 I just got an Chinese camera installed (high) and I was wondering if this (💻 Enable all 4 view modes in camera module) can be coded on my device?

[@dralinizam]

Thanks alot

[@hassanawan5457]

Everything works for me however my camera doesn’t pop out or show when I click the parking sensor button. Could this be due to my coding or due to older head unit ?

[@MarJanooo]

Bad gateway software. Same problem with my passat.

[@mrfixpl]

It looks like I'm lucky with my 2015/16 MK7 and modules that it came with from the factory. Both gateway and parktronic are stock and it worked as expected.

[@MarJanooo]

​@@mrfixpl I had a good luck from factory but VW service decided to updated my unit to 5Q0907530AJ and this one don't want to cooperate with camera retrofit. Technically newer soft but worse.

[@hakkelaardarrazi5921]

After you’re done coding the headunit (5F) you need to reset it by holding the power button

[@DimaLegoFUN]

There is a problem f.e. in tiguan in long coding you cannot change or input coding 1 by 1 only input whole line of code and if you put f.e. data set from tiguan on kodiaq f.e. you can only use tiguan coding whole code at once or you will have problem such error not coding. But f.e. tiguan doesnt have parking parallel assist it will not work on tiguan and you cannot change that setting. So you need to use data set from kodiaq on kodiaq or karoq and input whole code at once...

[@mrfixpl]

I believe parameterization determinates vehicles. This will reject coding with first 4 bytes that do not match the dataset. That's my guess.

[@confilms5041]

What would the car class and car generation be if I have an S3 sedan? Great video by the way, thank you in advance

[@mrfixpl]

Try 01 73 01

[@confilms5041]

@@mrfixpl hello thank you just to confirm would the 01 be for car class 73 for car generation and 01 for vehicle variant

[@AH-ee7gn]

Hi there what is the vehicle class for a mk6 polo 2022 thanks

[@mrfixpl]

Try 02 62 00

[@marcofedele3800]

I performed the procedure as in the video but when I finished the 6C module of the camera it says it does not respond and has the black badge. how can I solve it?

[@zimp942]

Have you solved it

[@zimp942]

I have same problem now

[@glynwilson647]

Hi, I followed your instructional videos and installed my Highline camera yesterday, thanks for your knowledge but when I try and open the boot by hand nothing happens, the camera is working, do you know what I might have done wrong, thanks

[@mrfixpl]

Check if you can open it when ignition is on.

[@glynwilson647]

@mrfixpl Hi, you are correct, ignition on it works, ignition off it doesnt, thanks

[@glynwilson647]

@@mrfixpl Do you know what I would need to do now so it will open with or without the ignition on

[@mrfixpl]

You need to provide permanent power. Not just ignition hot.

[@brathishan5611]

Does anyone know if this is the same for mk7.5??

[@mrfixpl]

Should be the same.

[@DimaLegoFUN]

So will not be video how to calibrate camera?

[@mrfixpl]

If there's a way of doing it without ODIS, I will do it.

[@DimaLegoFUN]

@@mrfixpl it possible with vcds

[@Sebastian-vh2qs]

Hej. Spróbuj Proszę podjechać pod przeszkodę i sprawdzić czy działają Ci przednie czujniki. W takim kodowaniu jak u Ciebie działają mi wszystkie dodatkowe tryby tylko tracę wizualizacje Parkowania. Dla mnie odpalanie kamery z przycisku na desce jest bez sensu i powinny się odpalać pdc a nie widok z kamery. U mnie albo działa pdc i nie mam dodatkowych opcji kamery albo dodatkowe opcje i brak pdc jako wizualizacji. Sprawdź to proszę i daj znać. U mnie gateway zmieniony na końcówkę AM

[@mrfixpl]

Przy podjechaniu przodem odpalają się czujniki i mała nakładka z wizualizacją.

[@Sebastian-vh2qs]

@@mrfixpl to albo ktoś u mnie nie potrafił tego zakodować albo nie wiem. U mnie są 2 opcje jak pisałem. Albo mam tryby dodatkowe z kamery high ale nie działaja czujniki, działają glosowo ale nie ma wizualizacji oryginalnej albo nie mam trybów dodatkowych kamer ale działaja mi czujniki i mogę je sobie wyzwolić przyciskiem. Nie jesteś z okolic Warszawy może? Mogę Ci nagrać filmik i wysłać jak aktualnie u mnie to działa bo wygląda jakbyś mógł pomóc :)

[@MarJanooo]

@@Sebastian-vh2qs Witam w klubie. U mnie już nie jeden magik próbował wszystkich znanych metod i za cholerę nie idzie tego ogarnąć. Chyba trzeba pogodzić się, że roczniki 15/16 to ruletka jak chodzi o montaż kamery. Może to wina samego MIB2 bo tutaj w prezentowanym golfie jest technisat, a ja mam delphiego.

[@yuriikucheriavyi7426]

Same for me((

[@Sebastian-vh2qs]

@@MarJanooo ja mam harmana bo high i nikt nie umie tego ruszyć xD dla mnie klikanie przycisku od parkowania powinno wyświetlać przednie czujniki a nie kamerę,.od tego jest bieg wsteczny. Także magicy nie do końca sami ogarniają co się dzieje i ja to zrobić -.-

[@garethgwilliam]

Great video, where can i find the correct codes for the vehicle class, generation, variant and derivate supplement? I'm getting the same code as you did.

[@ofektal8]

No Calibration needed?

[@mrfixpl]

Used camera. Came parameterized and calibrated. Will try to redo the calibration if I find a way of doing it without ODIS.

[@ofektal8]

@@mrfixpl I once saw someone doing it with OBDeleven, maybe you can find out how.

[@ytviewer1636]

@@mrfixplwhat if it’s new and not parameterized, what needs to be done?

[@Slowik713]

Model ładowarki bezprzewodowej ?

[@mrfixpl]

kzbin.info/www/bejne/qoHQlaZ5j9Wap6c