No video

VW MK4 Loaded Steering knuckle Installation - Hub, bearing + steering knuckle

  Рет қаралды 81,958

TuneMyEuro

TuneMyEuro

Күн бұрын

In this video you'll see how to remove an old steering knuckle and replace it with a new loaded steering knuckle from AARodriguez Corp., this includes a brand new bearing, brand new hub and brand new steering knuckle, all OEM quality.
1.8T and VR6 Left Steering knuckle can be found here
www.fixmyvw.com...
1.8T and VR6 Right Steering knuckle can be found here
www.fixmyvw.com...
TDI and 2.0 Left Steering knuckle can be found here
www.fixmyvw.com...
TDI and 2.0 Right Steering knuckle can be found here
www.fixmyvw.com...

Пікірлер: 47
@markfulton956
@markfulton956 2 жыл бұрын
My son who is a trainee mechanic is just about to start this job, this video has been incredibly helpful. There are a number of self locking nuts that need to be replaced and used only once, might be good to add that in somewhere
@JamesAnderson-mr2sg
@JamesAnderson-mr2sg 4 жыл бұрын
Use the spreader for removing from the strut as well as installation. Avoids all the hammering
@mightymikee
@mightymikee 5 жыл бұрын
How often does the tie rod end come off like that.. Thanks for making the video.
@RossPotts
@RossPotts 8 жыл бұрын
looking forward to doing this job this weekend. i just realized that i actually ordered my loaded knuckles from you!
@ryanbohr314
@ryanbohr314 2 жыл бұрын
Went to the link provided. Could not find the steering knuckle or hub assembly for Mk4 VR6 GTI
@davidallen5535
@davidallen5535 2 жыл бұрын
Oooh - Don't use the torque wrench to loosen the axel nut!! Use a breaker bar to loosen 1/2 turn, then back to torque wrench for the next 38 ftlbs, then back to breaker bar for the final 1/6th turn. It's not good to put that much extra stress on your expensive torque wrench. Use the cheap breaker bar!!
@silent_insanity3631
@silent_insanity3631 8 жыл бұрын
Nice, where can I find one new like this for a 99 B5 2.8l v6 passat? I need my car back on the road asap and can not drive it til I replace the hub and don't have a press.. any info on where I could get a loaded hub/bearing/knuckle for my car would be appreciated.
@eliudreyes6600
@eliudreyes6600 5 жыл бұрын
2 years later but lol ecs tunning got it
@fockyoumang
@fockyoumang 10 жыл бұрын
I just had my front passenger hub replaced and now the and light is on and ABS system isn't working along with traction control, ASR light is on right after moving a couple feet. The brake light and chime are in but if you press the air recirculation button right next to the AC button the red light on the cluster and chime turns right off, like it's a switch our somethings crossed. And it all happened after having both hubs replaced
@metalpaint1
@metalpaint1 7 жыл бұрын
FockYouMang .hi man.. i have the same problem..how did you solved problem..thanks
@decathec
@decathec 3 жыл бұрын
Grinding noise gets worse when turning to left or right? 2002 mk4 2 door golf
@vintagemotoseattle
@vintagemotoseattle 2 жыл бұрын
lol doesnt matter. You need to change yours. Dont turn up the radio. It doesnt make it go away!
@nickbelouin1120
@nickbelouin1120 4 жыл бұрын
Incredible video man this is going to save my life
@jamesflynn1716
@jamesflynn1716 Жыл бұрын
Does anyone have the torque spec for the nut that attaches the knuckle to the strut I didn't see it listed in the torque spec list
@ItzSupp
@ItzSupp 3 күн бұрын
Yup same
@johnathandoerty1021
@johnathandoerty1021 6 жыл бұрын
All without a Steering-Knuckle Spreader??? Wow; I can't get myne back on by hitting it with a hammer...
@t.shorttc1745
@t.shorttc1745 2 жыл бұрын
So what about getting the control arm down for knuckle to slide on properly
@justwatchingffs371
@justwatchingffs371 2 жыл бұрын
Yeah he stopped the video right when things got complicated
@rayrusso4138
@rayrusso4138 Жыл бұрын
Where do I go to buy a set for the fronts ?
@rolando7660
@rolando7660 Жыл бұрын
Got mine from parts geek.
@rickydub6950
@rickydub6950 8 жыл бұрын
excellent guide
@THEGREATONE420
@THEGREATONE420 9 жыл бұрын
man that procedure on the hub nut just seems like some volkswagen tech manual writer is pulling a LOL on us. and also they say to replace almost every single bolt on this fricken car with a new one when changing things out... what a bunch of BS... give it a visual inspection and if it's still good reuse it.
@superdave19855
@superdave19855 7 жыл бұрын
Not so. Some of these bolts are torque-to-yeild bolts. They do in fact stretch over time with stress. They need to be replaced when replacing these items. I speak from experience of not changing them when I should have. The subframe bolts started to back themselves out after about 500 miles. I had to replace them all. 25K miles later and no probs.
@aRYANz88
@aRYANz88 5 жыл бұрын
@@superdave19855 I replaced my subframe today. I reused the bolts. They are stretch bolts. I guess ill see how they hold after 500 miles. Did you torque to 100 ft pounds plus a 1/4 turn?
@superdave19855
@superdave19855 5 жыл бұрын
THEWIDOWSON Yes I did. I guess if you want you could put some loc-tite. I just learned the hard way and decided to go ahead and follow the manufacturer recommendations.
@aRYANz88
@aRYANz88 5 жыл бұрын
@@superdave19855 Thanks im going to do just that.
@aRYANz88
@aRYANz88 5 жыл бұрын
@@superdave19855 After driving the car about 50 miles im defiantly going to be ordering some new bolts. The car feels too loose. And everything is installed and torqued correctly. So lesson learned.
@fockyoumang
@fockyoumang 10 жыл бұрын
Both hubs were replaced but a week apart and the ASR and ABS lights came on instantly
@TuneMyEuro
@TuneMyEuro 10 жыл бұрын
It sounds like the sensors are too far away from the hubs, the correct distance is about the width of a hacksaw blade 3mm
@chrisprimavera8603
@chrisprimavera8603 9 жыл бұрын
It's easy to break the sensor trying to remove it. There are fine wires inside connecting the coil to the sensor. I would just buy a new sensor along with the bearing assembly and ball joint.
@fockyoumang
@fockyoumang 8 жыл бұрын
+ATCkeepsUsafe for some reason it still drive straight and the steering wheel was aligned straight also. I just got a alignment before that. I've replaced both control arms, ball joints, tie rods, tie rod ends, right after both hubs were replaced. Go on my channel and look at the video that says "catastrophic hub fail" or something like that. I was pissed off so bad that morning
@fockyoumang
@fockyoumang 8 жыл бұрын
+ATCkeepsUsafe they must've did an alignment when they finished
@fockyoumang
@fockyoumang 8 жыл бұрын
+ATCkeepsUsafe I never said it did or didn't
@tjc219
@tjc219 3 жыл бұрын
Can anyone tell me if I have to replace the tie rod end nut I'm getting the stretch bolts for the control arm and the rest should've came with the steering knuckle
@tylerwilkins1646
@tylerwilkins1646 4 жыл бұрын
Great Video, thank you
@gnarshread
@gnarshread 5 жыл бұрын
Nice Video!
@virusboy07
@virusboy07 3 жыл бұрын
DAMN Volkswagen charged me almost two grand to do this 💀 I’ve been had
@richarddonnelly1895
@richarddonnelly1895 2 жыл бұрын
BS... WHEN HE TORQUES IT TO THE 37LBS LISTEN, YOU HEAR THE CLICK ON THE TORQUE WRENCH & HE CONTINUES TO TORQUE THE NUT PAST THE 37LBS THRESHOLD& THEN ADDS A 6th OF A TURN???????
@teodoro1007
@teodoro1007 8 жыл бұрын
No gloves.... Filthy job, not worth to look at.
@lotan9709
@lotan9709 3 жыл бұрын
0:11 xx
@lotra8244
@lotra8244 3 жыл бұрын
Yang sayang aku like yang cinta allah coment.
@hontro7846
@hontro7846 3 жыл бұрын
Like si veniste a jalartela.
Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!
10:11
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,5 МЛН
VW Replace Front Wheel Bearing & HUB on GTI_GOLF_JETTA_R32
18:37
KEEP CREATING
Рет қаралды 141 М.
The Joker kisses Harley Quinn underwater!#Harley Quinn #joker
00:49
Harley Quinn with the Joker
Рет қаралды 40 МЛН
Whoa
01:00
Justin Flom
Рет қаралды 54 МЛН
Now it’s my turn ! 😂🥹 @danilisboom  #tiktok #elsarca
00:20
Elsa Arca
Рет қаралды 12 МЛН
WILL IT BURST?
00:31
Natan por Aí
Рет қаралды 40 МЛН
MK4 Wheel Bearing Replacement! ( From Amazing To Nightmare Lol )
30:32
Christian Smith
Рет қаралды 30 М.
How to change Front wheel bearing on VW GOLF 4 TUTORIAL | AUTODOC
16:48
Wheel bearing replacement on site without dismantling the hub carrier
21:04
Volkswagen Golf mk4 rear wheel bearing replacement
21:56
Cory's DIY Auto
Рет қаралды 49 М.
VAG - Volkswagen Polo - Front Wheelbearing / Wheelhub replacement
9:49
JustRandom Cars&Urbex
Рет қаралды 128 М.
VW Golf Mk6 Rear Wheel Bearing Replacement
22:28
dave sterl
Рет қаралды 45 М.
Front wheel Alignment   Toe In :Out
21:04
D3Sshooter
Рет қаралды 440 М.
FWD Wheel Hub Bearing Remove Press Install VW Golf HIGH DETAIL
39:05
briansmobile1
Рет қаралды 385 М.
Вибрация при торможении. Ищем причины
25:29
The Joker kisses Harley Quinn underwater!#Harley Quinn #joker
00:49
Harley Quinn with the Joker
Рет қаралды 40 МЛН