Vw T5 build series - Touran seats - will they fit ep16

We are cracking on with the T5 transporter build series and today I’m playing with the seats, I really like the touran seats including the rear ones but can I make them fit?
Let’s find out
#t5transporter #t5 #dtetv

[@nealjoyce8696]

People won’t appreciate how much hard work has gone into all that metal fabrication and the finishing process , really looks factory . The heave gauge box section was definitely the way to go and from a welder/fabricator you’ve done a lovely job 👏👏👏

[@YTDTETV]

Thanks Neal I did spend a while doing it, the hard part was cutting all the pieces sqaure with just a grinder, I managed to make the box square but it took longer. Really appreciate that mate 🙏👍

[@brianfraser700]

Mint mate , love it, far better than factory👌👌👌 . By the way buy a tow eye ext peice as the std tow eye wont fit due to front sportline front face lift. .....ask me how i know lol 🙈🙈🙈

[@YTDTETV]

Hey Brian thank you mate 🙏 oh man really 🙈 I actually put the tow hook in the van yesterday and i actually thought I wonder if it will fit, well I know now thank you 😂👍👍

[@wandango5913]

Loving the effort going into this build Nathan, I fitted Range Rover Evoque seats in mine and didn’t allow for the driver side offset, luckily I welded 5mm plate onto the swivel base that bolted directly to the seat base, I just worked out where the driver seat needed to be and welded new plates to the other swivel base. I then fitted the first swivel to the passenger base, don’t really notice that it’s different as there’s no central reference point in front on the dash and the gap is only 10mm out on the b pillar. Great effort building a bomb proof base for the kids but don’t forget to reinforce the floor underneath with extra steel to spread the weight, VW use mounting brackets underneath, the part number is 7H0802763A so that you get the idea of the shape of it. When you take the floor out you may find that the position that you need to drill is somewhere near the locations marked on the floor for the factory seat brackets

[@YTDTETV]

Hey bud I bet yours are nice 👍 I will take a look at the floor when I strip it out after Xmas I did use some thick plates under my nuts for extra strength but will defo look at it again. Thanks for the part number I’ll look now 👍👍

[@Shrekeo]

Loved this episode! You're a very talented man and your kids are extremely lucky. Well done to you sir! 👍🏻

[@YTDTETV]

Hey bud glad you enjoyed it and really appreciate the kind words 🙏 thank you 👍

[@scorcha100]

You cant beat a bit of custom fabrication. You would never have been able to buy something already made which would have been anywhere near as strong. Perfection at its finest 👌🏾

[@Astra8676]

Job well done mate. The rear seat set up looks pukka!!

[@YTDTETV]

Thank you mate really appreciate that 👍👍

[@chrismason3464]

Nice job that Nathan, what I've done with box section before is drill big enough hole to weld a piece of x sized tube through the box pending bolt size used, and you can bolt through the middle of that, without crushing your box section and it's strong 💪 👌👍

[@YTDTETV]

Hey Chris that is a very good idea 👍👍 I’ve seen so many box sections crushed buy having a bolt through them but that’s easy to do and will never crush thanks mate I still have room to do that 👍👍

[@chrismason3464]

@YTDTETV thanks Nathan 😊 we've used it on race cars we've built for years, I can warrant it's tried and tested 😀 👌 and will certainly with stand any knock, if the unfortunate occurs....

[@mick7425]

Brilliant video as always nathan you am a very gifted person am loving the transporter build now.keep them coming 👍

[@YTDTETV]

Thank you mick appreciate that mate 👍

[@Harty.1]

Nathan you got to be so proud of that bud . Them seats a a absolute smashers . When I come up and seen you last week I could see you had your work cut out . Thanks for making me feel so welcome to bud . Tailgate is underway now . Hope to pop up and see you again bud . Trob is I want some touran front seats now for my van . They are lush . My Mrs will band me from watching your channel soon 😂😂😂 keep looking forward bud , I’m out 🤙🏽

[@YTDTETV]

Hey Chris thank you mate I am really happy with them and kids like them so a job worth doing, oh mate anytime I had a nice time chatting with you, I sometimes get abit worried about meeting viewers as there’s some crazy folk out there but straight away I knew you was a sound guy 🙏. Glad the tailgate is underway 👍 and being reused. Haha oh man don’t tell the mrs you saw and idea in my videos 🙈. Your always welcome to pop in mate, even a bluewater caddy meet as that should shave an hour each way off your distance. Have a great weekend mate, ps I bought some of that insulation from B&Q 👍 I give you a shoutout in the next video.

[@SISPX]

Love this! I'd be tempted to use some of the material off the spare middle seat for the armrest ;) Keep the vid's coming fella...oh yea!

[@upthereddevils]

Brilliant job on the fabrication of the seats mate Won’t get anything that strong from the factory 👍👏

[@YTDTETV]

Hey bud thank you 👍 I’ve fitted a few aftermarket seats and also genuine seats over the years I copied a few ideas but just beefed everything up for safety, someone has commented and said they ain’t safe 🙈🤷.

[@simonmbaker]

This T5 build just keeps on getting better and better..! Far better content than some of the big channels out there.!! You keep it real...🇬🇧

[@YTDTETV]

Hey simon thank you mate really appreciate that 👍 I don’t have the budget like the bigger channels so I just do my best 👍

[@Lea2kcaddy]

Absalute perfection mate! Very inpressed with the rear seat base design! I’ve fitted a rock n roll bed to a t5 and it’s not made of much atall!! 😂 the structure of ur design is extra safe 💪 the attention to detail on the t5 as a whole is second to none!!! Well done mate very impressed. 😎👍

[@AG-636]

Nice job Nathan, On the grey carpet on armrest a trick we used to do on grey parcel shelfs back in the day can of black spray paint job done 😊

[@YTDTETV]

Hey bud thank you and that is a very good little trick I will try it 👍👍

[@maxthecaddy8451]

very very nice, excellent fabrication, safe and practical 👍

[@YTDTETV]

Hey max thank you sir really appreciate that 👍👍

[@neiljemmerson8826]

Nice work again Nathan but wouldn't expect anything less, going to be verrrr nice when carpets go in.

[@YTDTETV]

Hey Neil thank you sir really appreciate that 🙏👍

[@conradhaigh2500]

The kids will kick off as there’s no charging port in the back. The seats are looking awesome, I was thinking you would have put two front seats in the back. But yet again another great video

[@YTDTETV]

Hey Conrad you a so right and I did plan to mention that in the videos but it’s sometimes hard to remember everything on the fly while the camera is rolling, yes a charging point right in the back of the arm rest is on the list 👍👍

[@charlesmott8863]

Rola Cola, OMG that takes me back :D, it was disgusting, more like cough medicine :P. Mate, your skills are becoming more and more obvious, The seat base is a work of art, I have a diesel heater on my van. I also dropped the tank to fit the fuel line and drilled the extra hole. I have a Lavaner Pro 4kw, coupled with an Afterburner controller (Ray Jones in Australia makes them as a hobby) I will deffo bear the Touran front seats in mind should we ever decided to go the two seat option. Our double folds flat, but you can also get a bracket from Vankraft (or make one yourself) that gives the double seat a little bit of extra tilt back, not adjustable though. All in all, good work.

[@YTDTETV]

Hey bud haha the cola of choice back in the day 😂👍, diesel heater will be very soon 👍 I like the sound of the afterburner controller and more info on that? My mate had T5 seats that folded flat actually maybe a similar setup. Thanks for the comment mate 👍

[@SudcaDredd]

Very nice job, mate... still thinking about mine rear seats and this video was very instructive for me

[@YTDTETV]

Thank you mate 👍

[@robtorino]

Top job mate, I love your creativity and ability to adapt to suit your own style, loving the video and love watching your channel. It’s making me crave for a caddy or transporter more and more every video I watch, just can’t find any content like this for my MK2 Ford Connect van

[@YTDTETV]

Hey bud thank you 🙏🙏, my caddy is still my favourite and glad I bought one, the T5 is also good it’s just the caddys bigger brother. Your right there’s definitely not much for the Ford stuff 👍

[@Mac_F87]

Hey Nath, I was fancying doing the Caddy life bench seats in our Caddy. Wanted an easy clip in and out affair. I also liked that fact it keeps the full floor space. After watching your seat install in the Caddy I think the Touran seats are the way to go. You don’t actually lose that much floor space and seems like less hassle to do a DIY install. Also man logic, it’s an excuse for me to buy a MIG welder again 😂 Tidy install in the Transporter though. Look mint as always mate.

[@YTDTETV]

Hey bud thank you 🙏 I’ve used the touran seats in a couple of builds now and I really like them so versatile and comfy to. I enjoy making stuff and this one worked out as planned. Appreciate the comment mate 🙏👍👍

[@clivewebster6576]

Fantastic video again and awesome, honest advice and learning curve with thought process. Cheers Nathan, loving the build series

[@timbird5494]

Wow another fantastic job Nathan looking good, your full of great ideas very talented mate 👌👍

[@YTDTETV]

Hey Tim thank you mate really appreciate that 🙏👍

[@DanDanDan89]

That van is looking good! I want to get the lean kit for my passenger seats, think it gives you an extra 10% lean. Any plans on upgrading the dash?

[@YTDTETV]

Hey bud yes I’ve seen them 👍 I have searched eBay once or twice on dash boards it is definitely on the cards 👍

[@Justus.wood.]

You care about your work, and it shows. Well done!!

[@YTDTETV]

Thank you mate appreciate that 👍👍

[@TonyHarrison78989]

Looking good, Nath! Quick win for the floor, I've used the rubber interlocking matting from halfords, 2 packs for 20 quid was enough to do my custom. I've made mine a day van similar to yours, but I still use it for work. The mats are easy to replace and make it a bit nicer for the kids in the back.

[@YTDTETV]

Hey bud that’s a good shout actually as carpet will get knackered so I will look at those thank you 👍👍

[@deancooper_DC21]

Loving the vids mate! not to serious or perfect which is a breath of fresh air IMO 👍🏻 the pointing at wheel spin guy was absolute gold 😂

[@YTDTETV]

Hey Dean thank you mate appreciate the feedback and haha I was chuffed about that actually 👍👍

[@gentlesoul1513]

saying it again, thanks for sharing, I'm way behind on my T5 build but every video is an inspiration for me to keep going, please share the front arm rest mods when you do them as the Touran seats are great.

[@YTDTETV]

Hey bud thank you glad the videos are useful 👍👍 I will definitely make a video on armrests and it will be soon my left arm definitely needs one while driving 👍

[@richardneal394]

Looks factory mate, your videos are very honest, you don’t make it look easy you just show us how to do it properly, I’m glad the seats from Billy Caddy Enhancements did the job 👍

[@YTDTETV]

Hey Richard thank you 👍 Billy has sorted me out a few times great guy 👍👍

[@T9DFU]

impressive craftsmanship sir! Simple but effective, Taking the extra time is worth it when it gives that oem appearance!

[@YTDTETV]

Thank you mate appreciate that 👍

[@Cragy1970]

This build series is brilliant great work as always Nathan 🤙🤙🤙🤙🤙

[@YTDTETV]

Thank you mate really appreciate that 👍👍

[@dewiowen5803]

Great job, lot of hard work, well and truly paying off 💪👍

[@YTDTETV]

Thank you mate 🙏👍

[@mrdanfaulkner]

That seatbelt upright and arm rest section looks sweet as! I would say carpet over it all but you've really pulled it off and it looks sweet painted satin black! Top job Nath!

[@YTDTETV]

Hey Dan thank you mate really appreciate that, I like the satin black but your right carpet would look good to 👍👍

[@mark7218]

Great job Nathan, the time it takes dosnt really matter when it comes to safety and it looks the part, well done I look forward to the next video.

[@YTDTETV]

Hey mark thank you mate really appreciate that 🙏👍

[@guy4469]

On a sunday me and my sister were allowed to drink , DANDY LYON AND BURP A LOT .while my dad drove the rover P5 and smoked a cigar and my mum smoked pardrive .

[@mikerittmanreborn4955]

WEREWOLF'S ARE REAL AND HAVE BEEN SEEN IN THE UK

[@cohones_grande]

Bloody hell ……… Rola Cola!! Those were the days😆😆. Top notch as always dude, vans looking better and better by each vid. Nice to see/hear “skip banger” making a return appearance too 😂😂

[@kentallen9856]

Oh wow Nathan you just go beyond expectations with your videos and the effort you put into that seat frame was epic you should patent that frame design and get them made you could make a good wedge but that all down to time which probably don't have , keep the videos coming .

[@YTDTETV]

Hey bud thank you 🙏 I did think that about the frame, it could be cut with a machine cutter in no time and welding would only take an hour. Appreciate that bud 👍👍

[@james3418]

That could be your finest hour Nath. Absolutely cracking job on the rear seats mate very well done 👍

[@YTDTETV]

Hey James thank you mate really appreciate that 🙏👍

[@SUNXV1]

Nice work Nathan, the rear seat setup looks great and well thought out 👍

[@YTDTETV]

Thank you mate really appreciate that 👍

[@davidf.49]

You could fit a Vectra / Signum cooling Box between the rear seats. There are cupholder in and armrests too

[@davidladd2962]

Looks so good Nathan well done, a lot of hard work has gone into it. I bet you are super happy with it.

[@YTDTETV]

Hey David I am very happy thank you 🙏👍

[@preonmodel9906]

Yep , like me you love Touran seating, like a sofa in a car.. That’s a fantastic result, well worth the effort that you put into it. Well done and bravo.

[@YTDTETV]

Thank you mate really appreciate that and yes I love the touran seats so we’ll designed and cheap to buy 🙏👍

[@guy4469]

Ive heard a lot off insurance companys wont touch converted vans anymore ,dont know much about it .they only go with whats on the V5 ,And blue peter was better than Magpie ,

[@dieselbushcraft1299]

Oh man the care building those back seats is great. Dad can take his family to see the lights, enjoy your trip pal.

[@YTDTETV]

Hey bud thank you 🙏 I looked on the rear view mirror and saw the kids using the armwrest and in that one moment the days of work paid off ❤️👍👍

[@craig4640]

Can you send me contact details for the guy who sells the Touran parts please. I have a Touran and need some bits. Thanks

[@materialprufer1024]

I used strong neodym magnets, to find good places to drill. Place them on the underbody. Then you can see where you come out at the top. Made a lot of retrofit on Sprinters, most of the time i work alone.

[@REDGRIFFIN100]

Good effort, that base is much better made than most rock n roll bases that's for sure 👍

[@YTDTETV]

Thank you mate appreciate that 👍

[@darylgti]

Hi mate, could I pick your brain please regarding the engine swap

[@karl3927]

Great job you did there Nathan and thank you for the video. The Touran seats look great - definitely a wise move on your part to use them 👍. Have a great weekend mate.

[@YTDTETV]

Hey Karl thank you mate I’m glad my plan can to fruition 👍 really appreciate the support you have a great weekend to 🙏

[@michaelclarke3684]

Great seat conversion Nathan and fantastic content as usual.

[@YTDTETV]

Thank you Michael 👍👍

[@ilikechickensausages2075]

How are the LED conversion kits holding up

[@DarrenHopkinson-b5q]

Rear seat base looks awesome

[@YTDTETV]

Thank you mate 👍

[@michaellittler2616]

Hi Nathan that is time well spent on the rear seats, they look really good and more importantly safe for your children 👍

[@YTDTETV]

Hey Michael thank you mate really appreciate that 🙏 the kids like them so time well spent 👍👍

[@apedog1659]

Nice work mate. And thanks for the great videos

[@cliveroulstone9366]

Great job engineering at its finest 👍

[@YTDTETV]

Thank Clive mate 👍

[@conlon861]

Subscribed, love the channel Ah yeh 🎉

[@billyyusef8762]

Those rear seats came out so good, top job!!!

[@YTDTETV]

Thanks Billy 👍

[@scottsvxr]

🎅🧑‍🎄😎👌.......You need to put some side impact on the rear beam .....just saying, Great work👌

[@YTDTETV]

Hey Scott thank you for the input sir I shall take a look when I do the boarding 👍👍

[@grantssmartrepairs]

some proper DTE happened there very nice 👌👌👌

[@YTDTETV]

Thanks you grant mate really appreciate that 🙏👍👍

[@kaydentitford3628]

Wakadoo mate epic video, amazing craftsmanship there dude most definitely, it's looking stunning mate too right well bloody done top work top bloke nd thank u again for today mate really appreciate it mate legend

[@YTDTETV]

Hey Dean thank you mate and no problem hopefully the mrs car is happier 🙏👍

[@plumpii7177]

Looks wicked... vw t5 parts are crazy money, it's £100 and then they start pricing in nice round thousands per used part.. my t5's value is about 12 grand at the moment, but going by used parts prices, it's worth 8.3 million pounds if I break it.. its cheaper to buy in Central London than build a t5 camper..

[@YTDTETV]

Hey plumpi thank you appreciate that and yes the parts are crazy money 👍 good thing if you own one your money is safe.

[@Neo_59]

Hi. I'm planning to turn 1+2 seats into 1+1. Your video was very useful. But the handbrake is very bad. Is there any way to cancel the mechanical handbrake and install an electronic handbrake?

[@YTDTETV]

Hey bud thank you and yes the handbrake does stick right out on these it would be nice to get rid of it, I’m sure and electric conversion is possible 👍

[@brianknight4595]

Hi Nathan Now Touran seats are sweet one other reason why they sell because they perform and comfortable ! But your seat frames are built like a brick - - - - house study and as you say FACTORY CHEERS BRIAN

[@YTDTETV]

Hey Brian thank you mate 👍 the touran seats are good in every way your right. I only used the materials I had in the shop and worked out good I think 👍

[@jimjones6106]

that seat base turned out great some nice work there Nathan you should get an old headrest cover for your armrest so it matches the new seats . the van is looking fab 👌

[@YTDTETV]

Hey Jim thank you sir 👍 that is a good shout for the armwrest cover to make them match 👍👍

[@LizzyFerretOfficial]

I love watching your videos mate - your talent to be able to just whip up a frame with seatbelt & armrest-y bit like this is just amazing, you should be really proud of yourself and your skills; I’ve no doubt your family are super super proud of you and of all you’ve achieved. I love the wee tips about using parts from other VAG motors too like the polo window mechanism: those wee tricks are worth their weight in gold!

[@YTDTETV]

Thank you I do appreciate the support and kind words, I see something I want to make and spend abit of time just thinking about it so I don’t wish I had done it a different way half way through, the mrs and the kids enjoy the caddy and the t5 so that makes me happy. Thanks again Lizzy 🙏

[@sean9595]

All coming together, now, looking sweet roll in the next upload I noticed you had a topdone in your hand. JS3000 where did you get it from i’m thinking of getting one 👍🏼👍🏼👍🏼👍🏼

[@YTDTETV]

Hey Sean thank you mate 🙏 yes I have been sent a handfull of bits to try from TOPDON themselves and they are all so good 👍 I also have the 600 series code reader which is brilliant. I didn’t have to pay for mine 😃 but the cheapest place I’ve seen them is on eBay 👍👍

[@karter5351]

Absolutely Fab bit of Fabin going down there DT, Pukka Job is that, well thought through and just as well executed

[@YTDTETV]

Hey Karter thank you mate, it took a while but I enjoyed it and the kids like it so the effort has payed off 🙏👍👍

[@apollosillen509]

Because of your close microphone the background grinding isn't intrusive

[@YTDTETV]

Hey bud thank you appreciate the feedback I do my best to keep background noises from being intrusive but being on a busy estate it’s sometimes hard so thank you for letting me know 👍👍

[@littlealmcb943]

Cracking job mate it looks almost OEM. Transit and shitroen rear seat conversions in vws always look crap. I used 12mm tile backer boards wrapped in super stretch lining to insulate my t5. worked a treat. Ya van looks a million dollars well done

[@YTDTETV]

Hey bud thank you 👍👍 haha I call the shittroens to 😂, that’s a good idea I shall be carpeting soon.

[@kinross24]

Should add the third mid seat in the back in case one of your kids want to bring a friend or grandparent? Fit it so it can easily be removed, like in Renaults Espace/Scenic, Vauxhall Combo etc Also, add and weld large steel plates underneath the floor to bolt through to make safer in crash

[@YTDTETV]

Hey bud that’s a good idea about the third seat and your right I did weld my nuts to some thick plates for underneath but forgot to mention in the video. Thank you mate 👍

[@anthonyhoran2543]

You say the rear seats l😊ok relatively factory? What are you on about buddy………..it looks better than factory! Totally brilliant love it

[@YTDTETV]

Hey Anthony really appreciate that mate thank you 🙏👍

[@CogwinderHDGaming]

Great video as always. Off topic what's You're plans for the bike in the garage? I saw it and thought maybe Café Racer? That'd make a great video series

[@YTDTETV]

Hey bud thank you 👍 it’s a cg125 and I’ve given it a light resto recently to sell it on, I do have a video on the channel but I’ve unlisted the video as it’s off topic content. I’ll re list the video right now so you’ll be able to watch it if you want 👍 drop a comment on the video if you watch it. Thank you

[@alanmoore6638]

Very nice job. Like the way you cut in the “how to” bits of video in the middle of the explanations

[@YTDTETV]

Hey Alan thank you sir 👍 so whenever I’m really busy or involved I take those little shots while doing then add in the explanations, really appreciate the feedback 🙏👍

[@guy4469]

billy nell ive got a mate called jimmy nail .

[@daz575]

Should have just fitted kombi floor brackets and seats, really doesn’t look great, rest of the work you’ve done looks bang on 👍

[@YTDTETV]

Hey bud I did look at them for sure, don’t have much or any budget so just had to make the best of what I can. Thank you 👍👍

[@missg300]

why do i have visions of your mrs being the designated driver with 1 of the kids in the front while you kick back in the rear with the other kid 😂😂😂 also,i seemed to find your humour on point in this video.well done with the custom build 👍

[@YTDTETV]

Hey miss g, haha I hadn’t thought of that but now you mention it that’s a great idea 😂👍, thank you for the feedback I do my best with being funny the mrs just says I’m funny looking. Thank you 🙏👍

[@brendonbriggs622]

Your sick mate. Everything you do is sweet mate, watch caddy videos started doing bits to mine, watch all these now want a t5 😂 and start tinkering with 1 haha

[@YTDTETV]

Hey Brendon thank you mate really appreciate that 🙏 the T5’s are nice to work on the same as caddys, just a little bigger 😊👍👍

[@ianduckworth9925]

Have a look at the recent Combe Valley Campers video for fitting the seat belt into the back of the T5 for a Combi conversion! No need to weld plate on that pillar.

[@YTDTETV]

Hey Ian I’ve seen a few of there videos they definitely know there stuff and only 10 minutes up the road from me 👍

[@anthonyodonnell1869]

Seat belts are not fit for use I believe

[@marcb5328]

Looking good couple of sliding draws under the rear seats ? Nicely done Nathan

[@YTDTETV]

Hey Marc that is a good shout actually rather than having to lift the seat up draws would work nicely 👍👍

[@mrjibrox]

Perfection …….That looks better then Factory …Top work

[@YTDTETV]

Thank you mate really appreciate that 🙏👍

[@karlmansfield3537]

Good job man I did that for someone while back I put some draws under it on sliders nice for storing kids stuff

[@YTDTETV]

Hey Karl thank you bud, draws are a good idea 👍

[@noskills9577]

Lot of work in this one

[@billsheehy1660]

Brilliant, great fabrication and vision to get there. Thank You

[@YTDTETV]

Hey bill thank you 👍 the kids enjoy the seats so extra effort was definitely worth it, I’ve looked in my rear view mirror and seen the kids using the arm wrest etc 🙏👍

[@davetherave4328]

plug in drill in the rain ......love the direction health and safety is going here 🤣

[@YTDTETV]

Hey Dave haha it’s all I had to hand and when I edited the video I see the rain was getting the extension wet 😂👍👍

[@thomasjones3946]

Another cracking job there attention to detail again spot on as always ❤👍👍👏👏

[@YTDTETV]

Thank you Thomas appreciate that mate 🙏👍

[@stuartpenn933]

Great video nath lottery love went into the fabrication of the rear seating looks good mate , have emailed book faced you for an address to send you auto switch for lights

[@YTDTETV]

Hey Stuart thank you mate appreciate that 👍 I’m a little behind with replying to the face ache DM’s but I will get there very soon 🙏👍

[@mikecook9588]

Haha I fitted my rear seats on the near side so with my enduro bike would fit behind the drivers seat enabling the rear passengers to exit the side sliding door

[@YTDTETV]

Hey Mike I did wonder about putting them on the other side to 👍👍

[@kinross24]

You might want to move the seats back a tad and build a wee step/foot rest for when the front seats are swivelled so there’s a foot resting elevated floor which can also be used for storage or routing a diesel heater vent hose?

[@YTDTETV]

Hey bud that is a good idea actually and yes I have a few ideas for the diesel heater when it arrives thank you 👍

[@waynegavin142]

Love it, glad to see your ok after no seat belt and 5 adults smoking in the car LOL

[@YTDTETV]

Hey Wayne haha being almost 40 rules and regulations where a little bit more relaxed when I was young 😂👍

[@johnshaw4140]

Nice one Nathan , I've got a Chevy G30 ex ambulance , bought it in Holland , took it to my country holiday home in Romania , I took the front and back seats out of a Saab 9000/Fiat Croma and built a cubby behind the back seats for my spare wheel / jack / tools etc

[@YTDTETV]

Hey John thank you 🙏 oh very nice 👍 I enjoy thinking up ideas and putting them to good working use, feels nicer than just buying and fitting stuff.

[@archiebaldock5488]

Top work again Nathan, looks factory 👌👍👍

[@YTDTETV]

Thanks Archie mate 👍👍

[@littlealmcb943]

Also ive got a set of touran rear seats and belts free to collect from ne10 if any1 wants them

[@YTDTETV]

Hey bud oh man I reckon someone will take them super handy set of seats 👍👍

[@TheMase60]

Great work but why didn't you make a brace under van for the seat frame .

[@YTDTETV]

Hey bud thank you 👍 I did think about that for sure, maybe it’s something I can add.

[@blowtorchscorch7549]

Some very thoughtful fabrication there on the touran seats Nathan. 👌

[@YTDTETV]

Hey mate thank you really appreciate that 👍 I take a good bit of time thinking about stuff to hopefully make it right 🙏👍

[@Вальдемар-н8щ]

Может лучше три одиночки и как раз средняя становилась бы подлокотником и столиком!

[@YTDTETV]

Hey bud that’s a good shout 👍 nice big center console rather than a the small one I made, I just wanted the seats to be smaller in the van and not take up much space.

[@Stop..carry-on]

Nice fabrication of the rear seat frame✅ very skilled

[@YTDTETV]

Thank you mate appreciate that 🙏👍

[@leejames3614]

Pukka mate, that's all I need to say! Top work

[@YTDTETV]

Thank you Lee appreciate that mate 👍👍

[@mrwhite292]

Better than factory mate, excellent work as always.

[@YTDTETV]

Hey bud thank you really appreciate that 👍