VW T5 T6 Number Plate Light problem solved

How to Tutorial on fault finding rear number plate light issues on a VW T5 T6 . Step by step instructions how how to trace the light fault and fit new seals.

[@SLE1992]

Underrated video, thank you because i wouldn't even have thought of the plate lights!

[@youcandoit1828]

Thanks for the feedback. If you are talking views then because I'm not signed up for adverts KZbin demotes the video.I'll sign up soon. You can do it :)

[@bradfordgoerss3242]

was just trying to replace the bulb and damnit....a 5 minutes job turned into a nightmare the day before inspection. bugger!! Thank you for this video and taking the time to show how you worked through the different problems. Cheers!

[@youcandoit1828]

Thanks for the feed back and I hope she passed inspection. You can do it.

[@bradfordgoerss3242]

@@youcandoit1828 got it done and passed inspection. cheers. now to tackle the CV joint and ball joint.

[@youcandoit1828]

@@bradfordgoerss3242 You can do it 👍

[@fergy1ful]

Many thanks for this. My lights have played up for ages but true to form, with MOT approaching, one light is out (not the bulb) so this weekend's job is.....and knocking myself out with the tailgate at some point as well!

[@youcandoit1828]

Thanks, you can do it 👍

[@herrhenke]

Thanks for the video mate, really helped me out what to expect doing some troubleshooting on mine.

[@youcandoit1828]

Thanks for the feedback and Good luck. You can do it

[@SCULPTURAMAplus]

Very helpful. Thanks

[@youcandoit1828]

Glad it helped and thanks for the feedback. You can do it 👍

[@josephpugh9603]

Great video will have a go tomorrow cheers for the help

[@youcandoit1828]

Keep us posted how it goes. You can do it 👍

[@marcosmelhuish7456]

Brilliant video. I was lucky that the two clips just needed pulling forward with a pair of thin nose pliers! Happy days If it helps others my bulbs on a T5.1 were OSRAM C5W 239 12V

[@youcandoit1828]

Easy solution. You can do it.

[@christiangillibrand7896]

Thank you Very informative video,how lucky are you to live in the beautiful Austria

[@youcandoit1828]

Thanks for the feedback. Austria is nice. You can do it 👍

[@pippashaw8224]

Great video. You didn’t show taking the lock mechanism off? It was a fiddle the little tabs on the wiring loom were to Far gone so I put little red spade terminals on the loom and straitened the lugs on the light fittings. Fitted a reversing camera at the same time. But that’s another story 🤔

[@youcandoit1828]

Hi, didn't need to take the lock on the the T5.1. Reversing camera is another video in the making. You can do it.

[@pippashaw8224]

You Can Do It ! My van is a T5. I did it 😎. Your videos have helped my do a lot of work myself.

[@youcandoit1828]

@@pippashaw8224 Excellent that’s the whole point of ´you can do it´ Motivation to do it yourself. You can do it 😊

[@DRokKster]

Just had the same hitch, managed to reach the two inner bolts with long 10 mm. I guess his model didn't have the handle fitted. Anyway, very helpful vid thanks, I came here from MOT fail, bought two replacement LED lights, then found a break in the exact same place! Used a workaround for now to get the lights working for the test. The main problem is that after market lights don't have the offset, so you need to engineer them a little. There was no seal in place on my van, which explains the problem.

[@georgidrenski2988]

Super Glue is not the best if you want it to be water resistant on a long run.

[@youcandoit1828]

Thanks for the feedback. The super just holds it in place as the runner is squashed between the lamp holder unit and the back door when you secure the four nuts holding it together. You can do it 👍