VW Tech Talk 217: ATE Teves ABS Braking System

  Рет қаралды 4,662

compu85

compu85

Күн бұрын

Пікірлер: 9
@benjaminbeebe9182
@benjaminbeebe9182 2 жыл бұрын
Great little video, didn’t realize to bleed the rears you had to put the ignition on and hold the brake pedal a bit!
@vwestlife
@vwestlife 3 жыл бұрын
So '80s it even has a Scanimate intro! And I always thought Teves was pronounced "teevs".
@Eurospec73
@Eurospec73 3 жыл бұрын
I always wondered why the ABS system in my Corrado doesn't work, after watching this video it really explains in detail how the whole ABS system works perhaps my ABS control unit is faulty? My accumulator is probably depleted the ABS has not work since I've had the car.
@compu85
@compu85 3 жыл бұрын
The power brake booster function should work, even if the ABS does not. The accumulator is somewhat easy to test... if you start the car it should charge up. Turn the ignition off, and see how many assisted presses of the brake pedal you get. If the pedal goes hard right away, your accumulator is dead.
@Eurospec73
@Eurospec73 3 жыл бұрын
@@compu85 thanks I will definitely give that a try I'll press down my brake pedal a couple times after I start the car and turn it off. Hopefully my accumulator isn't shot from what I understand there's this 3 way distribution valve that the brake lines come out of and I heard the valves inside of them eventually end up seizing up so people say you're better off swapping out the distribution block valve for the Passat 4 channel one you'll have better ABS control after doing so from what I hear.
@corradokid79
@corradokid79 2 жыл бұрын
Another Corrado owner with a faulty Teves ABS system. Some think the capacitors in the ABS unit need to be replaced, but many owners convert to the non-ABS master cylinder. I'd still like to figure it out and keep the (admittedly ancient) system though. Thank you @compu85 for posting this!!
@Eurospec73
@Eurospec73 2 жыл бұрын
@@corradokid79 Save yourself the headache it's not worth keeping the ABS system in these Corrado's, the wires are known for overheating and burning out the ABS modules, it was just a terrible flaw and design from the factory. I've already removed the whole entire ABS system from my Corrado and switched to non abs from a Passat, B4 no more shaking, and in my opinion the car stops alot better! 💪🥳🎉
@Andrew-zv4fm
@Andrew-zv4fm 3 жыл бұрын
Cool video. Where do you find videos like this?
@compu85
@compu85 3 жыл бұрын
eBay mostly.
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 102 МЛН
Сюрприз для Златы на день рождения
00:10
Victoria Portfolio
Рет қаралды 2,8 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
How Strong is Tin Foil? 💪
00:25
Brianna
Рет қаралды 33 МЛН
How a TEVES ABS system works
29:16
HUBBABUBBA DOOPYDOOP
Рет қаралды 9 М.
Замена ABS на Вакуум на Passat B3.
10:23
𝙳𝚒𝚖𝚊 𝚂𝚑𝚒𝚕𝚒𝚖𝚘𝚟
Рет қаралды 34 М.
ABS ON vs ABS OFF | What's Really the Difference?
7:20
OVERDRIVE
Рет қаралды 1,7 МЛН
Volkswagen Corrado ABS to Manual Braking System Conversion
30:48
Volkswagen - DIGIFANT - Fuel and Ignition System (1987)
27:07
It’s Vibrating When Braking & It’s Not the Rotors. How to Test! (Nissan Versa)
13:58
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 102 МЛН