@@WalcomS7 There's one on offer up but vie sent the offer early this morning and still nothing hopefully they will see it tomorrow or vie just ordered a 4 pack of demo rockets for nothing
@lordofdapit3 жыл бұрын
great vid! i actually modified my conquest pro to take tachi mags and curved talons. you just cut a little bit of the shell thats above the magwell but below the sling point, as well as a little bit of the inner frame. i also replaced the catch spring that slots into the talons with one from OMW. so it'll take those mags but will stop working after 3-5 slamfire shots unless i reposition everything because it's not a perfect fit. slow timed shots are fine, but that kinda defeats the purpose haha. also, @spartan 412 discovered this can take a k25
@SirBrass3 жыл бұрын
It definitely has sealed breech potential, just like the nexus. And drac has already made a mag release extension so you can reach the release without shifting your firing grip.
@P3chcic3 жыл бұрын
I love how DZ made their quirky dart rotation systen work flawlessly and Nerf can't even build a hopper properly
@genedocsinnovations83193 жыл бұрын
Welf Hasbruh did fail mightily on that Atlas elevator doohickey 😁
@kingarthur6053 жыл бұрын
Not even a real revolver
@karifaevt2 жыл бұрын
All they had to do was look at the homework of the FNp90
@karifaevt2 жыл бұрын
or the hk g11
@technogabi56032 жыл бұрын
Why don't they have the Infinus then?
@Pancakewafflers3 жыл бұрын
Nerf: at its knees, begging for mercy Dart Zone: C O N Q U E S T P R O
@alaeriia013 жыл бұрын
Dart Zone said their goal in 2021 was to "dominate" the blaster space. They weren't kidding.
@p_42253 жыл бұрын
Mercy? I think you spelt money wrong
@Atlantic_dummie3 жыл бұрын
@@alaeriia01 all they need to do is launch it globally
@jamietheshaymin92903 жыл бұрын
@@p_4225 that is a comedy, good sir.
@LonelyMinnesotan13 жыл бұрын
And it was possible because of our sponsor, RAID: SHADOW LEGENDS
@RDarkhill3 жыл бұрын
What's crazy is they essentially recreated the H&K G11 in toy form. Probably the most notoriously complex firearms ever designed.
@zeanyt23723 жыл бұрын
There's an idea for a body kit.
@danjudex24753 жыл бұрын
More like a spring powered p90.
@zeanyt23723 жыл бұрын
@@danjudex2475 "well yes but actually no." Yes you insert the magazine from the rear of the Blaster like a P90, but there's nothing really unique or interesting about the magazines themselves. The P90 is essentially a basic open bolt machine gun like a Thompson, the complex part of the P90 is the magazines that rotate the rounds 180 degrees and feeds them down. Due to this having a rotating chambering mechanism this is much more like the G11. Sorry for the mini rant, I watch a lot of Forgotten weapons.
@finalbladecrisis3 жыл бұрын
Or alternatively, a Hill SMG, but with the mag orientation changed.
@CAPTAiNC3 жыл бұрын
@@danjudex2475 hm, this reminds me more of one of the p90 prototypes
@danvidsgaming77893 жыл бұрын
Hey its me, the guy who said you should bolt two Rival Saturns together, you know what needs to be done to this.
@mattcook68683 жыл бұрын
I need this in my life
@cside193 жыл бұрын
Palpatine: “Do it”
@maxwe1173 жыл бұрын
Ordered this glorious thing off of Walmart, finally back in stock for me, been checking daily, can’t wait to at minimum paint it up, hopefully mod it, as always, great video, I’m really enjoying the different format and scenery
@jj-sq2fu3 жыл бұрын
One thing I learned from using it is lets you remove the mag at your choosing primed or not. This allows you to do a mag swap with a Sealed breach and ready to fire.
@TheRealMycanthrope3 жыл бұрын
Mag full and one in the hole eh? Nice
@thetaminus23342 жыл бұрын
Honestly, kinda make sense considering the tech in the blaster
@nickc65702 жыл бұрын
The aeon should come with a skinny pusher out of the box
@centaur-gaming7492 жыл бұрын
the chambering system reminds me a lot of the German G11 prototype rifle, the germans didn't use it because it was too complicated. A toy company made a better chambering system than the entire german military!
@optiTHOMAS2 жыл бұрын
That's what I thought too! That thing is insanely complex and complicated! So much interesting engineering. The G11 is so cool! Kraut space magic! Yeah, these designs for dart zone are getting quite incredible!
@ethantaillefer-meyn65352 жыл бұрын
The g11 was adopted and slated for production, then USSR fell apart and with it the Berlin wall, the funds were redirected to reunification efforts
@kingpin76663 жыл бұрын
I’m wondering when you’ll bring back the “range” graphic?
@WalcomS73 жыл бұрын
I probably won't. I don't even live in the same place anymore. If anything it will take several videos for me to get the ranges down. It's also harder for me to put the camera in the same spot in the driveway.
@thetableofelements44723 жыл бұрын
@@WalcomS7 place a rock somewhere, or a twig ez.
@silas11733 жыл бұрын
@@thetableofelements4472 I think spray painting a square would be better
@Xenosthewatcher3 жыл бұрын
I love the nexus pro, but I love this thing just a little bit more. I absolutely love everything about this blaster, any complaint I have is relegated to nit picking. I honestly don't understand how Dart Zone can keep dropping hammer after hammer with not a single dud in sight. LIKE DART ZONE WE GET IT YOU WIN!
@TheSuperSushiMaster3 жыл бұрын
Just wait till you see the MK 3 :)
@randomdudethatplaysviolaon19033 жыл бұрын
@@TheSuperSushiMaster getting a mk3 for my b day feeling good
@ralcogaming76742 жыл бұрын
I fixed my only complaint, I built a skeletonized aluminum stock for it, I also repurposed the mag adaptor from my aeon pro into a mag holder attached to the stock. Currently doing a few extra improvements and wait excitedly for metal internals, also pretty sure one of these could be made into a pp19-bizon if someone was so inclined.
@zaka07813 жыл бұрын
I really think that the most adult, reasonable and right thing to do is glue two (or more!) of these and make a shotgun!
@grahambarlos86413 жыл бұрын
My favorite part of this blaster is that it doesnt have the huge "dead zone" for lack of a better term in the prime that the mk 1 and the nexus have
@xinixini18263 жыл бұрын
I was cutting some elite darts and goofed the length of the blade and didn't clamp it tight enough so I cut the darts kinda D-grade. Threw them in a Worker Mod 18 round mag and flung em. Then was like, I wonder what would happen if... I reloaded the magazine, but alternated between the dart halves. So, dart, dart end, dart, dart end. Priming would push the dart end up first. If that didn't make it out the barrel (essentially trying to shoot the back end of the dart) the dart with a tip primed behind that so it would shotgun them. Surprisingly there was enough force that most of the dart ends fired without needing a capped one for assistance. Fun for plinking indoors, just be aware those darts are laser beams. So it can be easy to lose track of them. Idk if it's just my imagination, but it's also an easier prime than a stock Nexus Pro. Was considering grabbing a tachi mag to see if that would be long enough to work lol. I know you tried it, but I thought of holding it in place and seeing if it would chamber darts. Like how the Lepus won't accept it, but it's technically usable.
@varoinck2 жыл бұрын
I think that a spas 12 type stock would work really well on this gun
@lion79423 жыл бұрын
Your the most underrated nerf KZbinr out there
@lion79423 жыл бұрын
Walcom your editing is getting a lot better
@Thesnakerox3 жыл бұрын
Something I think should be noted is that IIRC, all the Dart Zone Pro blasters have padded plungers, which makes them safe to dry fire. That's especially important for this blaster according to Drac because since it has slam fire, there's no way to really deprime it without dry firing.
@alexanderstephen22682 жыл бұрын
That's good to know, because I accidentally dry fired my conquest pro and DZ max dictator about half a dozen times each in the last few months but still work fine.
@markfacebook2 жыл бұрын
This thing begs to have either a retractable or underfolding U stock. Something that can be compacted but still allows access to the rear mag. Hope the mod community picks up on this.
@ralcogaming76742 жыл бұрын
Folding is a pain however if you're so inclined the furthest back screw hole is clear from any internals so drill away, I made mine into a full length rifle by attaching a fixed stock but folding isn't out of tue realm of possibility. Heck a standard modulus attachment point could be cut to allow the mag to drop.
@currently_dead6 ай бұрын
like a sterling smg style stock?
@othelloperrello66048 ай бұрын
Continues to be one of my favorite backup blasters. Reliable, consistent, quick, small. I have big hands, enjoy the mag change mech mostly because it feels extra tactical and takes longer to reload and aim, which gives me a disadvantage which I like, because I am an adult playing with kids.
@anajohnson31883 жыл бұрын
2:09 "It loads in through a *B* *U* *T* *T"* -Walcom S7, 2021
@zeroblade65993 жыл бұрын
Hmm, with a horizontal priming grip this thing can be holstered in one of those shotgun scabbard things without having a mag sticking out awkwardly...and you can swap the mag while it's holstered. I only wish the shape was a bit more like the saturn
@donovan95523 жыл бұрын
Walcom, Will you bolt two of these together to make a shotgun version of the Conquest? You did it for the Slingfire and the Alphatrooper; this one would be awesome as a shotgun!
@HeavyTanker-vx4oq3 жыл бұрын
Idea. Custom magazine that is shaped like a stock. Ultra high capacity Stockazine
@Randm_Shit6 ай бұрын
@HeavyTanker-vx4oq Like the macarov one?
@dragonblaster-vu8wz3 жыл бұрын
I have dirty plans involving this blaster and the dart zone mk3.
@zeanyt23723 жыл бұрын
Master key?
@dragonblaster-vu8wz3 жыл бұрын
@@zeanyt2372 yep. Though it will require a recon CS-6 and a knockout as well.
@zeanyt23723 жыл бұрын
@@dragonblaster-vu8wz okay. Knockout for the pump grip on the conquest makes sense. But where does the Recon come in?
@dragonblaster-vu8wz3 жыл бұрын
@@zeanyt2372 you were right on me making a master key. But you have to ask yourself, which blaster will be on top.
@zeanyt23723 жыл бұрын
@@dragonblaster-vu8wz I would have thought the MK3. The Conquest would be integrated like a rough cut on a stryfle with the knockout as a pump grip. And maybe the Recon as the main part of the stock so it could double as a cheek rest? Idk?
@robertbrunello3 жыл бұрын
I was surprised when I put mine over the chronograph also, even with a scar attached! This blaster has great value for how easily it delivers the hits. I enjoyed watching your enthusiasm throughout this review!
@CowboybubPercussion3 жыл бұрын
Wow, that chambering system literally works like a P90!!! That’s soo cool!!!!
@CollectionTHX11383 жыл бұрын
3:08 not as bad as old Coop when used to giggle whenever he said balls ; )
@michaelfinlay14122 жыл бұрын
Heh balls
@ralcogaming76743 жыл бұрын
I made a folding stock for my aeon pro it would probably fit on this rather nicely, just have to drill a bolt hole somewhere it won't hurt the internals. Edit-5 months later and I can confirm the stock not only fit it allowed for the mag to drop even unfolded. Granted I've since fixed the stock in place with an aluminum bar going from the grip and bending at 90° to reinforce the shoulder part. Someone smarter than I can surely make something better and likely more appealing to look at. I'm intending to do some strenuous range tests as soon as I get my sight for it. Gotta find out how precise this thing is.
@stardustsakura19843 жыл бұрын
Damn I might Have to pick this up myself. Thx for the Awsome review mister s7
@LoLo-wz3bq3 жыл бұрын
I'm already stoked about this blaster! now if only my local walmarts could fill the empty shelf spot they have labeled for them. :(
@TheRealNerfQuinn16 күн бұрын
Nerf: Stop! Stop! We’re already dead! Dart Zone: O M E G A P R I M E
@mattorama Жыл бұрын
My coworker bought one of these. The 10 round talon mag from my Nexus went into it, but getting it back out was a HELL of an endeavor.
@WalcomS7 Жыл бұрын
Should be as simple as press mag releases and shake it like it owes you rent.
@mattorama Жыл бұрын
@@WalcomS7 Shook it like a Polaroid picture. That particular mag has always been sticky in everything I've run it through, the batch it came from must have been a tiny bit out of spec.
@michaels34293 жыл бұрын
I Was not prepared for that big black mag.
@optiTHOMAS2 жыл бұрын
1:52 "that is way more compact than I expecting." Yep...that's what she said unfortunately...😔 😆 👍🏻Awesome designs coming out from dart zone!
@sirifjfjdjsjdufjdjdjdcjcjd31572 жыл бұрын
He lol
@tater73673 жыл бұрын
2:29-3:20 walcom being a **sussy baka** for 51 seconds
@brentkilgore51823 жыл бұрын
glad you're doing well! does the muzzle also fit MEGA and rival rounds like the previous ones?
@Planes99052 жыл бұрын
I bought this just for fun because I love my nexus. BUT this thing is wildly accurate for a hip shooter. Better than my nexus. Sooooo glad I got it on a whim. I almost prefer it over the other
@cside193 жыл бұрын
Just found this BEAUTIFUL blaster in my local store and I could not be happier with Dart Zone right now!
@genedocsinnovations83193 жыл бұрын
Congrats on a winner - now go load 50 yeah 50 balls in your Helix 😉. you're welcome from the Phantom Corps!
@zeapsin1863 жыл бұрын
Wow 2 videos in one day? As always love your videos, you're what got me into nerf blasters and wanting to mod.
@fishthestick3 жыл бұрын
I like how it isint like "might be the best" it's "is the best"
@robertscott78123 жыл бұрын
Can we just stop and appreciate that this thing as slamfire IN SPITE of it's unorthodox magazine placement?! Like, I thought having to rotate the darts 90° would make slamfire really hard to implement, and yet the system seems to work really smoothly!
@FamilyFoamsport3 жыл бұрын
Bigger plunger tube than the Nexus? Fascinating and exciting. Can't wait for people to start designing 3d printing parts for this.
@Patty-Q3 жыл бұрын
This video had the potential to be so ecchi and I dunno if we're blessed in missing it or if we missed out on something hilarious
@micheallaska59543 жыл бұрын
The jokes and memes made out of the way you load this blaster😳😫
@zaneflournoy33222 жыл бұрын
Nerf:ItS NeRf Or nOthInG dart zone:here is a butt loading mp40
@ryxtan3 жыл бұрын
You had me at weird-ass loading mechanism.
@orca13613 жыл бұрын
OOOOOO take a bunch of 20 round stick mags and put a stock attachment point them, so you can shoulder it.
@Urmom-em8jj3 жыл бұрын
3:08. That’s what she said
@The_MikeM3 жыл бұрын
Im glad Walcom is back at uploading stuff
@Spiderheart953 жыл бұрын
Walcom at 8:05 in the background is that two CPS 2000’s?
@plesbeans74403 жыл бұрын
now just make it a flywheeler, put the mag on the side, make it look like an MP7 and boom you got the halo M7 smg
@sirifjfjdjsjdufjdjdjdcjcjd31572 жыл бұрын
Mp7 is stupid
@davidsandlin96863 жыл бұрын
Somebody should make like a fifty round mag with a butt stock attachment on the end of it. You could easily make it stick out like 8-10 inches and still be comfortable to shoulder fire
@cryticfoxfan72823 жыл бұрын
Also two things if you prime the nerf gun while pulling on the jam door it will lock up as a safety, 2you can reload it with the nerf gun pump in the forward position
@nerdtvch53 жыл бұрын
My local Walmart recently put a bunch of blasters on clearance in stores, Target as well. I got the Mega Motostryke for $17 and $19 dollars. I got 2. 1 from Walmart, 1 from Target. My niece loves mega blasters, so I had to. And I kinda wanted one. I also picked up an Aeon Pro because I do not have any half dart magazines apart from the 2 I have from the Aeon and Nexus. And the Aeon takes full length. However and this is just weird. When I planned on switching to half darts I realized there wasn't any half dart flywheel blasters besides some fan builds or some modding. So I now have 1000 half-length darts and not enough magazines for it. And enough magazines for full length, but I buy cheap waffle heads that explode and jam in these blasters. Thinking I'll invest in bamboo darts soon. Be nice if they sold full-lengths with the tip one bamboo and adventure force half lengths.
@antonymalko20093 жыл бұрын
Beautiful new studio!
@_Ping__3 жыл бұрын
Me: *shoots a kid in a nerf war* The kid: you didn’t shoot me. Me: 4:22
@maxwe1173 жыл бұрын
This thing has as much potential as the video has unsaid jokes
@WalcomS73 жыл бұрын
True story: I removed about 25 minutes worth of jokes because they were too spicy.
@theCrystalWoods.3 жыл бұрын
@@WalcomS7 would you release the spicy version on patreon or do you just not want to have to deal with making that
@maxwe1173 жыл бұрын
@@WalcomS7 haha! You absolute madlad!
@shady80s222 жыл бұрын
Awesome video and awesome blaster but brotha....what's the name of that digital target? I need one of those asap
@chrislarson95043 жыл бұрын
i cool idea i thought of is making a specialized magazine that has high enough capacity that it can be used at a stock. and for aprearnce look you make it long enough to where you can make a curved mag
@alexanderstephen22682 жыл бұрын
Just bought this blaster earlier today, and I'm absolutely amazed at the loading mechanism and slam fire on this thing. If only I can join a group by me so that I can fire this thing all day.
@skippysboxofjunk81462 жыл бұрын
I can't wait for half length dart drum mags
@rickbrasche87812 жыл бұрын
been waiting to hear a review since you teased this one a while ago. And I was sitting on the fence about getting a pro mk. 2 as well. ordered them both, this channel is an Enabler lol (edit: darnit, not a single walmart around here has one in stock, or the mk. 2, so its mail order time. well after Christmas for me)
@citygent101 Жыл бұрын
Hi Walcom, What is that digital free standing touch screen target you have in this video? where can I buy one? :o
@m00k613 жыл бұрын
I have a Lynx too. This blaster is still really fun.
@firefreak1223 жыл бұрын
I love the .hack t-shirt your wereing in this!! Also the blaster is amazing!!
@raen81832 жыл бұрын
I'm new to the channel but had to ask, what's that cool target you are shooting toward the end of the video?
@Kuli240003 жыл бұрын
Dang it, walcom, why do you keep making me buy more blasters?
@WalcomS73 жыл бұрын
That's mostly Dart Zone, not me.
@yummehcheezman3 жыл бұрын
2 WALCOM VIDEOS BACK TO BACK BLESS UP
@pedrithodorsonne8512 жыл бұрын
I literally got the conquest pro today and… it’s… perfect🤩
@isaacoravetz5953 жыл бұрын
Very cool blaster,gonna get one,you could mount a collapsable stock off the back picatinny like the old tech 9 type,folds over the toplatches around barrel shroud.love your channel my man keep up the good work.✌😃
@hughzhouzhou98683 жыл бұрын
Dart zone really has conquered nerf…
@SirBrass3 жыл бұрын
They really "pegged" it with this one.
@boomer77843 жыл бұрын
I am in LOVE with this content an d'b format
@ViewtifulJosh3883 жыл бұрын
My friend, why didn't you use the sights at the shooting range? Was it because you didn't have your glasses? I ask because I have the other two pro blasters and I use the sights on them because they are crazy accurate. Anyway, great vid.
@guest082782 жыл бұрын
I'd really like to see a magazine with a built in stock for this blaster
@yeetergriffin15863 жыл бұрын
You can also put a rival or mega dart in the muzzle brake like the nexus which is awsome have one and is really cool
@kazkorianor3 жыл бұрын
It took it very well form behind , I think taking it form behind can be a lot of fun . XP
@albertosara4163 жыл бұрын
gotta say tho the electronic target has been one of the best additions for your reviews!
@nickfesta31803 жыл бұрын
This thing is the Ray Gun MKII. You can’t tell me otherwise. MAKE A RAYGUN MODDD
@alaeriia013 жыл бұрын
The one thing I don't like about Dart Zone is that the DZP mags aren't compatible with any of the other Pro blasters.
@jangoongfuel3 жыл бұрын
Dart Zone should make an Adventure Force auto-glock that shoots half length darts
@sirifjfjdjsjdufjdjdjdcjcjd31572 жыл бұрын
Imagine
@cccaaawww86853 жыл бұрын
The thing about the pro series is that You get high quality blasters for a small price
@PotentiallyKor2 жыл бұрын
Modded magazines that are stocks too???? I need to know if it would work
@indaDark3 жыл бұрын
inching closer to a true p90 loading style
@LeSpade723 жыл бұрын
this would be a fantastic secondary
@troythetinkerer3 жыл бұрын
Coney Dawg is gonna have fun with this one.
@Makotosaber3 жыл бұрын
I just ordered one and looking forward to fitting a shotgun style pump grip to make it look more like a shotgun.
@allenwood72372 жыл бұрын
What is the name of the target board that you use? I need something like that.
@jimschott42613 жыл бұрын
What is the target system that you used in this video.....I need to get one
@muscularcarrot57563 жыл бұрын
since the thin profile, you could probably attach a second one to the side to make a shotgun
@Boomstickmods3 жыл бұрын
Well that’s just fantastic. Gotta get myself a butt mag blaster
@michaelwasilewski Жыл бұрын
In your Opinion what do you Think is more powerful and Painful the Aeon The Nexus Or the Conquest?
@thundercrowz3 жыл бұрын
Heck ya
@Sadieis2qt3 жыл бұрын
Nice new house
@officerspankingson3 жыл бұрын
F-ing love the new voice over style!
@colinlasch41393 жыл бұрын
Those faster shots were random crits
@tannerwolfe3349 Жыл бұрын
no its not it has a problem where the darts get lodged in the priming mechanism and you need to either rip them out with tweezers or take the gun apart entirely
@Hyper-Pink3 жыл бұрын
Do the short dart drums work?
@Montisaquadeis3 жыл бұрын
Slamfire with Talon mags is a problem as it jostles the talon mags free.
@mechanwhal65903 жыл бұрын
If a longer magazine could be made, it could not only hold more darts (duh), but also be used as a stock.
@aaronbane9693 жыл бұрын
I've been waiting for this review. Thanks again Walcom!